Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.

Signed-off-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

1 files changed, 50 insertions, 0 deletions

diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
new file mode 100644
index 00000000000..a6b662c00b6
--- /dev/null
+++ b/drivers/acpi/reboot.c
@@ -0,0 +1,50 @@
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/reboot.h>
+
+void acpi_reboot(void)
+{
+	struct acpi_generic_address *rr;
+	struct pci_bus *bus0;
+	u8 reset_value;
+	unsigned int devfn;
+
+	if (acpi_disabled)
+		return;
+
+	rr = &acpi_gbl_FADT.reset_register;
+
+	/* Is the reset register supported? */
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+	    rr->bit_width != 8 || rr->bit_offset != 0)
+		return;
+
+	reset_value = acpi_gbl_FADT.reset_value;
+
+	/* The reset register can only exist in I/O, Memory or PCI config space
+	 * on a device on bus 0. */
+	switch (rr->space_id) {
+	case ACPI_ADR_SPACE_PCI_CONFIG:
+		/* The reset register can only live on bus 0. */
+		bus0 = pci_find_bus(0, 0);
+		if (!bus0)
+			return;
+		/* Form PCI device/function pair. */
+		devfn = PCI_DEVFN((rr->address >> 32) & 0xffff,
+				  (rr->address >> 16) & 0xffff);
+		printk(KERN_DEBUG "Resetting with ACPI PCI RESET_REG.");
+		/* Write the value that resets us. */
+		pci_bus_write_config_byte(bus0, devfn,
+				(rr->address & 0xffff), reset_value);
+		break;
+
+	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.\n");
+		acpi_hw_low_level_write(8, reset_value, rr);
+		break;
+	}
+	/* Wait ten seconds */
+	acpi_os_stall(10000000);
+}