Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 592 insertions, 0 deletions

diff --git a/drivers/acpi/resources/rsirq.c b/drivers/acpi/resources/rsirq.c
new file mode 100644
index 00000000000..fd07a8702fb
--- /dev/null
+++ b/drivers/acpi/resources/rsirq.c
@@ -0,0 +1,592 @@
+/*******************************************************************************
+ *
+ * Module Name: rsirq - IRQ resource descriptors
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsirq")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_irq_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_irq_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+	u8                              i;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_irq);
+
+
+	ACPI_FUNCTION_TRACE ("rs_irq_resource");
+
+
+	/*
+	 * The number of bytes consumed are contained in the descriptor
+	 *  (Bits:0-1)
+	 */
+	temp8 = *buffer;
+	*bytes_consumed = (temp8 & 0x03) + 1;
+	output_struct->id = ACPI_RSTYPE_IRQ;
+
+	/*
+	 * Point to the 16-bits of Bytes 1 and 2
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	output_struct->data.irq.number_of_interrupts = 0;
+
+	/* Decode the IRQ bits */
+
+	for (i = 0, index = 0; index < 16; index++) {
+		if ((temp16 >> index) & 0x01) {
+			output_struct->data.irq.interrupts[i] = index;
+			i++;
+		}
+	}
+
+	/* Zero interrupts is valid */
+
+	output_struct->data.irq.number_of_interrupts = i;
+	if (i > 0) {
+		/*
+		 * Calculate the structure size based upon the number of interrupts
+		 */
+		struct_size += ((acpi_size) i - 1) * 4;
+	}
+
+	/*
+	 * Point to Byte 3 if it is used
+	 */
+	if (4 == *bytes_consumed) {
+		buffer += 2;
+		temp8 = *buffer;
+
+		/*
+		 * Check for HE, LL interrupts
+		 */
+		switch (temp8 & 0x09) {
+		case 0x01: /* HE */
+			output_struct->data.irq.edge_level = ACPI_EDGE_SENSITIVE;
+			output_struct->data.irq.active_high_low = ACPI_ACTIVE_HIGH;
+			break;
+
+		case 0x08: /* LL */
+			output_struct->data.irq.edge_level = ACPI_LEVEL_SENSITIVE;
+			output_struct->data.irq.active_high_low = ACPI_ACTIVE_LOW;
+			break;
+
+		default:
+			/*
+			 * Only _LL and _HE polarity/trigger interrupts
+			 * are allowed (ACPI spec, section "IRQ Format")
+			 * so 0x00 and 0x09 are illegal.
+			 */
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Invalid interrupt polarity/trigger in resource list, %X\n", temp8));
+			return_ACPI_STATUS (AE_BAD_DATA);
+		}
+
+		/*
+		 * Check for sharable
+		 */
+		output_struct->data.irq.shared_exclusive = (temp8 >> 3) & 0x01;
+	}
+	else {
+		/*
+		 * Assume Edge Sensitive, Active High, Non-Sharable
+		 * per ACPI Specification
+		 */
+		output_struct->data.irq.edge_level = ACPI_EDGE_SENSITIVE;
+		output_struct->data.irq.active_high_low = ACPI_ACTIVE_HIGH;
+		output_struct->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_irq_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_irq_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+	u8                              IRqinfo_byte_needed;
+
+
+	ACPI_FUNCTION_TRACE ("rs_irq_stream");
+
+
+	/*
+	 * The descriptor field is set based upon whether a third byte is
+	 * needed to contain the IRQ Information.
+	 */
+	if (ACPI_EDGE_SENSITIVE == linked_list->data.irq.edge_level &&
+		ACPI_ACTIVE_HIGH == linked_list->data.irq.active_high_low &&
+		ACPI_EXCLUSIVE == linked_list->data.irq.shared_exclusive) {
+		*buffer = 0x22;
+		IRqinfo_byte_needed = FALSE;
+	}
+	else {
+		*buffer = 0x23;
+		IRqinfo_byte_needed = TRUE;
+	}
+
+	buffer += 1;
+	temp16 = 0;
+
+	/*
+	 * Loop through all of the interrupts and set the mask bits
+	 */
+	for(index = 0;
+		index < linked_list->data.irq.number_of_interrupts;
+		index++) {
+		temp8 = (u8) linked_list->data.irq.interrupts[index];
+		temp16 |= 0x1 << temp8;
+	}
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the IRQ Info byte if needed.
+	 */
+	if (IRqinfo_byte_needed) {
+		temp8 = 0;
+		temp8 = (u8) ((linked_list->data.irq.shared_exclusive &
+				 0x01) << 4);
+
+		if (ACPI_LEVEL_SENSITIVE == linked_list->data.irq.edge_level &&
+			ACPI_ACTIVE_LOW == linked_list->data.irq.active_high_low) {
+			temp8 |= 0x08;
+		}
+		else {
+			temp8 |= 0x01;
+		}
+
+		*buffer = temp8;
+		buffer += 1;
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_extended_irq_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_extended_irq_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              *temp_ptr;
+	u8                              index;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_ext_irq);
+
+
+	ACPI_FUNCTION_TRACE ("rs_extended_irq_resource");
+
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	/* Validate minimum descriptor length */
+
+	if (temp16 < 6) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	*bytes_consumed = temp16 + 3;
+	output_struct->id = ACPI_RSTYPE_EXT_IRQ;
+
+	/*
+	 * Point to the Byte3
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	output_struct->data.extended_irq.producer_consumer = temp8 & 0x01;
+
+	/*
+	 * Check for Interrupt Mode
+	 *
+	 * The definition of an Extended IRQ changed between ACPI spec v1.0b
+	 * and ACPI spec 2.0 (section 6.4.3.6 in both).
+	 *
+	 * - Edge/Level are defined opposite in the table vs the headers
+	 */
+	output_struct->data.extended_irq.edge_level =
+			   (temp8 & 0x2) ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+
+	/*
+	 * Check Interrupt Polarity
+	 */
+	output_struct->data.extended_irq.active_high_low = (temp8 >> 2) & 0x1;
+
+	/*
+	 * Check for sharable
+	 */
+	output_struct->data.extended_irq.shared_exclusive = (temp8 >> 3) & 0x01;
+
+	/*
+	 * Point to Byte4 (IRQ Table length)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/* Must have at least one IRQ */
+
+	if (temp8 < 1) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	output_struct->data.extended_irq.number_of_interrupts = temp8;
+
+	/*
+	 * Add any additional structure size to properly calculate
+	 * the next pointer at the end of this function
+	 */
+	struct_size += (temp8 - 1) * 4;
+
+	/*
+	 * Point to Byte5 (First IRQ Number)
+	 */
+	buffer += 1;
+
+	/*
+	 * Cycle through every IRQ in the table
+	 */
+	for (index = 0; index < temp8; index++) {
+		ACPI_MOVE_32_TO_32 (
+			&output_struct->data.extended_irq.interrupts[index], buffer);
+
+		/* Point to the next IRQ */
+
+		buffer += 4;
+	}
+
+	/*
+	 * This will leave us pointing to the Resource Source Index
+	 * If it is present, then save it off and calculate the
+	 * pointer to where the null terminated string goes:
+	 * Each Interrupt takes 32-bits + the 5 bytes of the
+	 * stream that are default.
+	 *
+	 * Note: Some resource descriptors will have an additional null, so
+	 * we add 1 to the length.
+	 */
+	if (*bytes_consumed >
+		((acpi_size) output_struct->data.extended_irq.number_of_interrupts * 4) + (5 + 1)) {
+		/* Dereference the Index */
+
+		temp8 = *buffer;
+		output_struct->data.extended_irq.resource_source.index = (u32) temp8;
+
+		/* Point to the String */
+
+		buffer += 1;
+
+		/*
+		 * Point the String pointer to the end of this structure.
+		 */
+		output_struct->data.extended_irq.resource_source.string_ptr =
+				(char *)((char *) output_struct + struct_size);
+
+		temp_ptr = (u8 *) output_struct->data.extended_irq.resource_source.string_ptr;
+
+		/* Copy the string into the buffer */
+
+		index = 0;
+		while (0x00 != *buffer) {
+			*temp_ptr = *buffer;
+
+			temp_ptr += 1;
+			buffer += 1;
+			index += 1;
+		}
+
+		/*
+		 * Add the terminating null
+		 */
+		*temp_ptr = 0x00;
+		output_struct->data.extended_irq.resource_source.string_length = index + 1;
+
+		/*
+		 * In order for the struct_size to fall on a 32-bit boundary,
+		 * calculate the length of the string and expand the
+		 * struct_size to the next 32-bit boundary.
+		 */
+		temp8 = (u8) (index + 1);
+		struct_size += ACPI_ROUND_UP_to_32_bITS (temp8);
+	}
+	else {
+		output_struct->data.extended_irq.resource_source.index = 0x00;
+		output_struct->data.extended_irq.resource_source.string_length = 0;
+		output_struct->data.extended_irq.resource_source.string_ptr = NULL;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_extended_irq_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_extended_irq_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             *length_field;
+	u8                              temp8 = 0;
+	u8                              index;
+	char                            *temp_pointer = NULL;
+
+
+	ACPI_FUNCTION_TRACE ("rs_extended_irq_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x89;
+	buffer += 1;
+
+	/*
+	 * Set a pointer to the Length field - to be filled in later
+	 */
+	length_field = ACPI_CAST_PTR (u16, buffer);
+	buffer += 2;
+
+	/*
+	 * Set the Interrupt vector flags
+	 */
+	temp8 = (u8)(linked_list->data.extended_irq.producer_consumer & 0x01);
+	temp8 |= ((linked_list->data.extended_irq.shared_exclusive & 0x01) << 3);
+
+	/*
+	 * Set the Interrupt Mode
+	 *
+	 * The definition of an Extended IRQ changed between ACPI spec v1.0b
+	 * and ACPI spec 2.0 (section 6.4.3.6 in both).  This code does not
+	 * implement the more restrictive definition of 1.0b
+	 *
+	 * - Edge/Level are defined opposite in the table vs the headers
+	 */
+	if (ACPI_EDGE_SENSITIVE == linked_list->data.extended_irq.edge_level) {
+		temp8 |= 0x2;
+	}
+
+	/*
+	 * Set the Interrupt Polarity
+	 */
+	temp8 |= ((linked_list->data.extended_irq.active_high_low & 0x1) << 2);
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the Interrupt table length
+	 */
+	temp8 = (u8) linked_list->data.extended_irq.number_of_interrupts;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	for (index = 0; index < linked_list->data.extended_irq.number_of_interrupts;
+		 index++) {
+		ACPI_MOVE_32_TO_32 (buffer,
+				  &linked_list->data.extended_irq.interrupts[index]);
+		buffer += 4;
+	}
+
+	/*
+	 * Resource Source Index and Resource Source are optional
+	 */
+	if (0 != linked_list->data.extended_irq.resource_source.string_length) {
+		*buffer = (u8) linked_list->data.extended_irq.resource_source.index;
+		buffer += 1;
+
+		temp_pointer = (char *) buffer;
+
+		/*
+		 * Copy the string
+		 */
+		ACPI_STRCPY (temp_pointer,
+			linked_list->data.extended_irq.resource_source.string_ptr);
+
+		/*
+		 * Buffer needs to be set to the length of the sting + one for the
+		 * terminating null
+		 */
+		buffer += (acpi_size)(ACPI_STRLEN (linked_list->data.extended_irq.resource_source.string_ptr) + 1);
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+
+	/*
+	 * Set the length field to the number of bytes consumed
+	 * minus the header size (3 bytes)
+	 */
+	*length_field = (u16) (*bytes_consumed - 3);
+	return_ACPI_STATUS (AE_OK);
+}
+