[ACPI] Allow return to active cooling mode once passive mode is entered

http://bugzilla.kernel.org/show_bug.cgi?id=3410
https://bugzilla.novell.com/show_bug.cgi?id=131543

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Konstantin Karasyov <konstantin.a.karasyov@intel.com>
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Yu Luming <luming.yu@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

2 files changed, 108 insertions, 93 deletions

diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 37528c3b64b..f3758401532 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -101,9 +101,7 @@ static unsigned int acpi_thermal_cpufreq_is_init = 0;
 static int cpu_has_cpufreq(unsigned int cpu)
 {
 	struct cpufreq_policy policy;
-	if (!acpi_thermal_cpufreq_is_init)
-		return -ENODEV;
-	if (!cpufreq_get_policy(&policy, cpu))
+	if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu))
 		return -ENODEV;
 	return 0;
 }
@@ -127,13 +125,13 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
 	if (!cpu_has_cpufreq(cpu))
 		return -ENODEV;
 
-	if (cpufreq_thermal_reduction_pctg[cpu] >= 20) {
+	if (cpufreq_thermal_reduction_pctg[cpu] > 20)
 		cpufreq_thermal_reduction_pctg[cpu] -= 20;
-		cpufreq_update_policy(cpu);
-		return 0;
-	}
-
-	return -ERANGE;
+	else
+		cpufreq_thermal_reduction_pctg[cpu] = 0;
+	cpufreq_update_policy(cpu);
+	/* We reached max freq again and can leave passive mode */
+	return !cpufreq_thermal_reduction_pctg[cpu];
 }
 
 static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
@@ -200,7 +198,7 @@ int acpi_processor_set_thermal_limit(acpi_handle handle, int type)
 	int result = 0;
 	struct acpi_processor *pr = NULL;
 	struct acpi_device *device = NULL;
-	int tx = 0;
+	int tx = 0, max_tx_px = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_processor_set_thermal_limit");
 
@@ -259,19 +257,27 @@ int acpi_processor_set_thermal_limit(acpi_handle handle, int type)
 		/* if going down: T-states first, P-states later */
 
 		if (pr->flags.throttling) {
-			if (tx == 0)
+			if (tx == 0) {
+				max_tx_px = 1;
 				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 						  "At minimum throttling state\n"));
-			else {
+			} else {
 				tx--;
 				goto end;
 			}
 		}
 
 		result = acpi_thermal_cpufreq_decrease(pr->id);
-		if (result == -ERANGE)
+		if (result) {
+			/*
+			 * We only could get -ERANGE, 1 or 0.
+			 * In the first two cases we reached max freq again.
+			 */
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "At minimum performance state\n"));
+			max_tx_px = 1;
+		} else
+			max_tx_px = 0;
 
 		break;
 	}
@@ -290,8 +296,10 @@ int acpi_processor_set_thermal_limit(acpi_handle handle, int type)
 				  pr->limit.thermal.px, pr->limit.thermal.tx));
 	} else
 		result = 0;
-
-	return_VALUE(result);
+	if (max_tx_px)
+		return_VALUE(1);
+	else
+		return_VALUE(result);
 }
 
 int acpi_processor_get_limit_info(struct acpi_processor *pr)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index a24847c08f7..19f3ea48475 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -72,7 +72,7 @@
 #define _COMPONENT		ACPI_THERMAL_COMPONENT
 ACPI_MODULE_NAME("acpi_thermal")
 
-    MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME);
 MODULE_LICENSE("GPL");
 
@@ -517,9 +517,9 @@ static int acpi_thermal_hot(struct acpi_thermal *tz)
 	return_VALUE(0);
 }
 
-static int acpi_thermal_passive(struct acpi_thermal *tz)
+static void acpi_thermal_passive(struct acpi_thermal *tz)
 {
-	int result = 0;
+	int result = 1;
 	struct acpi_thermal_passive *passive = NULL;
 	int trend = 0;
 	int i = 0;
@@ -527,7 +527,7 @@ static int acpi_thermal_passive(struct acpi_thermal *tz)
 	ACPI_FUNCTION_TRACE("acpi_thermal_passive");
 
 	if (!tz || !tz->trips.passive.flags.valid)
-		return_VALUE(-EINVAL);
+		return;
 
 	passive = &(tz->trips.passive);
 
@@ -547,7 +547,7 @@ static int acpi_thermal_passive(struct acpi_thermal *tz)
 				  trend, passive->tc1, tz->temperature,
 				  tz->last_temperature, passive->tc2,
 				  tz->temperature, passive->temperature));
-		tz->trips.passive.flags.enabled = 1;
+		passive->flags.enabled = 1;
 		/* Heating up? */
 		if (trend > 0)
 			for (i = 0; i < passive->devices.count; i++)
@@ -556,12 +556,32 @@ static int acpi_thermal_passive(struct acpi_thermal *tz)
 								 handles[i],
 								 ACPI_PROCESSOR_LIMIT_INCREMENT);
 		/* Cooling off? */
-		else if (trend < 0)
+		else if (trend < 0) {
 			for (i = 0; i < passive->devices.count; i++)
-				acpi_processor_set_thermal_limit(passive->
-								 devices.
-								 handles[i],
-								 ACPI_PROCESSOR_LIMIT_DECREMENT);
+				/*
+				 * assume that we are on highest
+				 * freq/lowest thrott and can leave
+				 * passive mode, even in error case
+				 */
+				if (!acpi_processor_set_thermal_limit
+				    (passive->devices.handles[i],
+				     ACPI_PROCESSOR_LIMIT_DECREMENT))
+					result = 0;
+			/*
+			 * Leave cooling mode, even if the temp might
+			 * higher than trip point This is because some
+			 * machines might have long thermal polling
+			 * frequencies (tsp) defined. We will fall back
+			 * into passive mode in next cycle (probably quicker)
+			 */
+			if (result) {
+				passive->flags.enabled = 0;
+				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+						  "Disabling passive cooling, still above threshold,"
+						  " but we are cooling down\n"));
+			}
+		}
+		return;
 	}
 
 	/*
@@ -571,23 +591,21 @@ static int acpi_thermal_passive(struct acpi_thermal *tz)
 	 * and avoid thrashing around the passive trip point.  Note that we
 	 * assume symmetry.
 	 */
-	else if (tz->trips.passive.flags.enabled) {
-		for (i = 0; i < passive->devices.count; i++)
-			result =
-			    acpi_processor_set_thermal_limit(passive->devices.
-							     handles[i],
-							     ACPI_PROCESSOR_LIMIT_DECREMENT);
-		if (result == 1) {
-			tz->trips.passive.flags.enabled = 0;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Disabling passive cooling (zone is cool)\n"));
-		}
+	if (!passive->flags.enabled)
+		return;
+	for (i = 0; i < passive->devices.count; i++)
+		if (!acpi_processor_set_thermal_limit
+		    (passive->devices.handles[i],
+		     ACPI_PROCESSOR_LIMIT_DECREMENT))
+			result = 0;
+	if (result) {
+		passive->flags.enabled = 0;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Disabling passive cooling (zone is cool)\n"));
 	}
-
-	return_VALUE(0);
 }
 
-static int acpi_thermal_active(struct acpi_thermal *tz)
+static void acpi_thermal_active(struct acpi_thermal *tz)
 {
 	int result = 0;
 	struct acpi_thermal_active *active = NULL;
@@ -598,74 +616,66 @@ static int acpi_thermal_active(struct acpi_thermal *tz)
 	ACPI_FUNCTION_TRACE("acpi_thermal_active");
 
 	if (!tz)
-		return_VALUE(-EINVAL);
+		return;
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-
 		active = &(tz->trips.active[i]);
 		if (!active || !active->flags.valid)
 			break;
-
-		/*
-		 * Above Threshold?
-		 * ----------------
-		 * If not already enabled, turn ON all cooling devices
-		 * associated with this active threshold.
-		 */
 		if (tz->temperature >= active->temperature) {
+			/*
+			 * Above Threshold?
+			 * ----------------
+			 * If not already enabled, turn ON all cooling devices
+			 * associated with this active threshold.
+			 */
 			if (active->temperature > maxtemp)
-				tz->state.active_index = i, maxtemp =
-				    active->temperature;
-			if (!active->flags.enabled) {
-				for (j = 0; j < active->devices.count; j++) {
-					result =
-					    acpi_bus_set_power(active->devices.
-							       handles[j],
-							       ACPI_STATE_D0);
-					if (result) {
-						ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-								  "Unable to turn cooling device [%p] 'on'\n",
-								  active->
-								  devices.
-								  handles[j]));
-						continue;
-					}
-					active->flags.enabled = 1;
-					ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-							  "Cooling device [%p] now 'on'\n",
-							  active->devices.
-							  handles[j]));
-				}
-			}
-		}
-		/*
-		 * Below Threshold?
-		 * ----------------
-		 * Turn OFF all cooling devices associated with this
-		 * threshold.
-		 */
-		else if (active->flags.enabled) {
+				tz->state.active_index = i;
+			maxtemp = active->temperature;
+			if (active->flags.enabled)
+				continue;
 			for (j = 0; j < active->devices.count; j++) {
 				result =
 				    acpi_bus_set_power(active->devices.
 						       handles[j],
-						       ACPI_STATE_D3);
+						       ACPI_STATE_D0);
 				if (result) {
 					ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-							  "Unable to turn cooling device [%p] 'off'\n",
+							  "Unable to turn cooling device [%p] 'on'\n",
 							  active->devices.
 							  handles[j]));
 					continue;
 				}
-				active->flags.enabled = 0;
+				active->flags.enabled = 1;
 				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-						  "Cooling device [%p] now 'off'\n",
+						  "Cooling device [%p] now 'on'\n",
 						  active->devices.handles[j]));
 			}
+			continue;
+		}
+		if (!active->flags.enabled)
+			continue;
+		/*
+		 * Below Threshold?
+		 * ----------------
+		 * Turn OFF all cooling devices associated with this
+		 * threshold.
+		 */
+		for (j = 0; j < active->devices.count; j++) {
+			result = acpi_bus_set_power(active->devices.handles[j],
+						    ACPI_STATE_D3);
+			if (result) {
+				ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+						  "Unable to turn cooling device [%p] 'off'\n",
+						  active->devices.handles[j]));
+				continue;
+			}
+			active->flags.enabled = 0;
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "Cooling device [%p] now 'off'\n",
+					  active->devices.handles[j]));
 		}
 	}
-
-	return_VALUE(0);
 }
 
 static void acpi_thermal_check(void *context);
@@ -744,15 +754,12 @@ static void acpi_thermal_check(void *data)
 	 * Again, separated from the above two to allow independent policy
 	 * decisions.
 	 */
-	if (tz->trips.critical.flags.enabled)
-		tz->state.critical = 1;
-	if (tz->trips.hot.flags.enabled)
-		tz->state.hot = 1;
-	if (tz->trips.passive.flags.enabled)
-		tz->state.passive = 1;
+	tz->state.critical = tz->trips.critical.flags.enabled;
+	tz->state.hot = tz->trips.hot.flags.enabled;
+	tz->state.passive = tz->trips.passive.flags.enabled;
+	tz->state.active = 0;
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
-		if (tz->trips.active[i].flags.enabled)
-			tz->state.active = 1;
+		tz->state.active |= tz->trips.active[i].flags.enabled;
 
 	/*
 	 * Calculate Sleep Time