Merge tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

From Tony Lindgren:

Minor board changes for v3.11 merge window. These are
tapering down finally as we're getting closer to making
omap2+ DT only.

* tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 33 insertions, 30 deletions

diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c
index fefc2ca7cc3..33dc6a00480 100644
--- a/drivers/acpi/apei/cper.c
+++ b/drivers/acpi/apei/cper.c
@@ -250,10 +250,6 @@ static const char *cper_pcie_port_type_strs[] = {
 static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 			    const struct acpi_hest_generic_data *gdata)
 {
-#ifdef CONFIG_ACPI_APEI_PCIEAER
-	struct pci_dev *dev;
-#endif
-
 	if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE)
 		printk("%s""port_type: %d, %s\n", pfx, pcie->port_type,
 		       pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ?
@@ -285,20 +281,6 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 		printk(
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
-#ifdef CONFIG_ACPI_APEI_PCIEAER
-	dev = pci_get_domain_bus_and_slot(pcie->device_id.segment,
-			pcie->device_id.bus, pcie->device_id.function);
-	if (!dev) {
-		pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n",
-			pcie->device_id.segment, pcie->device_id.bus,
-			pcie->device_id.slot, pcie->device_id.function);
-		return;
-	}
-	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO)
-		cper_print_aer(pfx, dev, gdata->error_severity,
-				(struct aer_capability_regs *) pcie->aer_info);
-	pci_dev_put(dev);
-#endif
 }
 
 static const char *apei_estatus_section_flag_strs[] = {
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index d668a8ae602..fcd7d91cec3 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -454,7 +454,9 @@ static void ghes_do_proc(struct ghes *ghes,
 				aer_severity = cper_severity_to_aer(sev);
 				aer_recover_queue(pcie_err->device_id.segment,
 						  pcie_err->device_id.bus,
-						  devfn, aer_severity);
+						  devfn, aer_severity,
+						  (struct aer_capability_regs *)
+						  pcie_err->aer_info);
 			}
 
 		}
@@ -917,13 +919,14 @@ static int ghes_probe(struct platform_device *ghes_dev)
 		break;
 	case ACPI_HEST_NOTIFY_EXTERNAL:
 		/* External interrupt vector is GSI */
-		if (acpi_gsi_to_irq(generic->notify.vector, &ghes->irq)) {
+		rc = acpi_gsi_to_irq(generic->notify.vector, &ghes->irq);
+		if (rc) {
 			pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n",
 			       generic->header.source_id);
 			goto err_edac_unreg;
 		}
-		if (request_irq(ghes->irq, ghes_irq_func,
-				0, "GHES IRQ", ghes)) {
+		rc = request_irq(ghes->irq, ghes_irq_func, 0, "GHES IRQ", ghes);
+		if (rc) {
 			pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n",
 			       generic->header.source_id);
 			goto err_edac_unreg;
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index bc493aa3af1..318fa32a141 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -278,11 +278,13 @@ int acpi_bus_init_power(struct acpi_device *device)
 		if (result)
 			return result;
 	} else if (state == ACPI_STATE_UNKNOWN) {
-		/* No power resources and missing _PSC? Try to force D0. */
+		/*
+		 * No power resources and missing _PSC?  Cross fingers and make
+		 * it D0 in hope that this is what the BIOS put the device into.
+		 * [We tried to force D0 here by executing _PS0, but that broke
+		 * Toshiba P870-303 in a nasty way.]
+		 */
 		state = ACPI_STATE_D0;
-		result = acpi_dev_pm_explicit_set(device, state);
-		if (result)
-			return result;
 	}
 	device->power.state = state;
 	return 0;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 44225cb15f3..b14ac46948c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1017,11 +1017,8 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
 		return -ENOSYS;
 
 	result = driver->ops.add(device);
-	if (result) {
-		device->driver = NULL;
-		device->driver_data = NULL;
+	if (result)
 		return result;
-	}
 
 	device->driver = driver;
 
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 5b32e15a65c..440eadf2d32 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -458,12 +458,28 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 	},
 	{
 	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Pavilion g6 Notebook PC",
+	 .matches = {
+		 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		 DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
+		},
+	},
+	{
+	 .callback = video_ignore_initial_backlight,
 	 .ident = "HP 1000 Notebook PC",
 	 .matches = {
 		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Pavilion m4",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"),
+		},
+	},
 	{}
 };
 
@@ -1706,6 +1722,9 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	int error;
 	acpi_status status;
 
+	if (device->handler)
+		return -EINVAL;
+
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE,
 				device->parent->handle, 1,
 				acpi_video_bus_match, NULL,