Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...

1 files changed, 39 insertions, 28 deletions

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 5917839321b..d3874f42565 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -378,6 +378,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	struct acpi_pci_root *root;
 	u32 flags, base_flags;
 	acpi_handle handle = device->handle;
+	bool no_aspm = false, clear_aspm = false;
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
@@ -437,27 +438,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
 	acpi_pci_osc_support(root, flags);
 
-	/*
-	 * TBD: Need PCI interface for enumeration/configuration of roots.
-	 */
-
-	/*
-	 * Scan the Root Bridge
-	 * --------------------
-	 * Must do this prior to any attempt to bind the root device, as the
-	 * PCI namespace does not get created until this call is made (and
-	 * thus the root bridge's pci_dev does not exist).
-	 */
-	root->bus = pci_acpi_scan_root(root);
-	if (!root->bus) {
-		dev_err(&device->dev,
-			"Bus %04x:%02x not present in PCI namespace\n",
-			root->segment, (unsigned int)root->secondary.start);
-		result = -ENODEV;
-		goto end;
-	}
-
-	/* Indicate support for various _OSC capabilities. */
 	if (pci_ext_cfg_avail())
 		flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
 	if (pcie_aspm_support_enabled()) {
@@ -471,7 +451,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		if (ACPI_FAILURE(status)) {
 			dev_info(&device->dev, "ACPI _OSC support "
 				"notification failed, disabling PCIe ASPM\n");
-			pcie_no_aspm();
+			no_aspm = true;
 			flags = base_flags;
 		}
 	}
@@ -503,7 +483,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 				 * We have ASPM control, but the FADT indicates
 				 * that it's unsupported. Clear it.
 				 */
-				pcie_clear_aspm(root->bus);
+				clear_aspm = true;
 			}
 		} else {
 			dev_info(&device->dev,
@@ -512,7 +492,14 @@ static int acpi_pci_root_add(struct acpi_device *device,
 				acpi_format_exception(status), flags);
 			dev_info(&device->dev,
 				 "ACPI _OSC control for PCIe not granted, disabling ASPM\n");
-			pcie_no_aspm();
+			/*
+			 * We want to disable ASPM here, but aspm_disabled
+			 * needs to remain in its state from boot so that we
+			 * properly handle PCIe 1.1 devices.  So we set this
+			 * flag here, to defer the action until after the ACPI
+			 * root scan.
+			 */
+			no_aspm = true;
 		}
 	} else {
 		dev_info(&device->dev,
@@ -520,16 +507,40 @@ static int acpi_pci_root_add(struct acpi_device *device,
 			 "(_OSC support mask: 0x%02x)\n", flags);
 	}
 
+	/*
+	 * TBD: Need PCI interface for enumeration/configuration of roots.
+	 */
+
+	/*
+	 * Scan the Root Bridge
+	 * --------------------
+	 * Must do this prior to any attempt to bind the root device, as the
+	 * PCI namespace does not get created until this call is made (and
+	 * thus the root bridge's pci_dev does not exist).
+	 */
+	root->bus = pci_acpi_scan_root(root);
+	if (!root->bus) {
+		dev_err(&device->dev,
+			"Bus %04x:%02x not present in PCI namespace\n",
+			root->segment, (unsigned int)root->secondary.start);
+		result = -ENODEV;
+		goto end;
+	}
+
+	if (clear_aspm) {
+		dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n");
+		pcie_clear_aspm(root->bus);
+	}
+	if (no_aspm)
+		pcie_no_aspm();
+
 	pci_acpi_add_bus_pm_notifier(device, root->bus);
 	if (device->wakeup.flags.run_wake)
 		device_set_run_wake(root->bus->bridge, true);
 
 	if (system_state != SYSTEM_BOOTING) {
 		pcibios_resource_survey_bus(root->bus);
-		pci_assign_unassigned_bus_resources(root->bus);
-
-		/* need to after hot-added ioapic is registered */
-		pci_enable_bridges(root->bus);
+		pci_assign_unassigned_root_bus_resources(root->bus);
 	}
 
 	pci_bus_add_devices(root->bus);