summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_cs5520.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-29 18:12:40 -0400
committerJeff Garzik <jeff@garzik.org>2006-08-29 18:12:40 -0400
commit669a5db411d85a14f86cd92bc16bf7ab5b8aa235 (patch)
tree8d4f9d63e18185695a4d97e1a3fa4e18b61c7345 /drivers/ata/pata_cs5520.c
parentb01e86fee6c821e4e003fd4e9f65453ac478a58e (diff)
[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_cs5520.c')
-rw-r--r--drivers/ata/pata_cs5520.c336
1 files changed, 336 insertions, 0 deletions
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
new file mode 100644
index 00000000000..792ce482851
--- /dev/null
+++ b/drivers/ata/pata_cs5520.c
@@ -0,0 +1,336 @@
+/*
+ * IDE tuning and bus mastering support for the CS5510/CS5520
+ * chipsets
+ *
+ * The CS5510/CS5520 are slightly unusual devices. Unlike the
+ * typical IDE controllers they do bus mastering with the drive in
+ * PIO mode and smarter silicon.
+ *
+ * The practical upshot of this is that we must always tune the
+ * drive for the right PIO mode. We must also ignore all the blacklists
+ * and the drive bus mastering DMA information. Also to confuse matters
+ * further we can do DMA on PIO only drives.
+ *
+ * DMA on the 5510 also requires we disable_hlt() during DMA on early
+ * revisions.
+ *
+ * *** This driver is strictly experimental ***
+ *
+ * (c) Copyright Red Hat Inc 2002
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * Documentation:
+ * Not publically available.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cs5520"
+#define DRV_VERSION "0.6.2"
+
+struct pio_clocks
+{
+ int address;
+ int assert;
+ int recovery;
+};
+
+static const struct pio_clocks cs5520_pio_clocks[]={
+ {3, 6, 11},
+ {2, 5, 6},
+ {1, 4, 3},
+ {1, 3, 2},
+ {1, 2, 1}
+};
+
+/**
+ * cs5520_set_timings - program PIO timings
+ * @ap: ATA port
+ * @adev: ATA device
+ *
+ * Program the PIO mode timings for the controller according to the pio
+ * clocking table.
+ */
+
+static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int slave = adev->devno;
+
+ pio -= XFER_PIO_0;
+
+ /* Channel command timing */
+ pci_write_config_byte(pdev, 0x62 + ap->port_no,
+ (cs5520_pio_clocks[pio].recovery << 4) |
+ (cs5520_pio_clocks[pio].assert));
+ /* FIXME: should these use address ? */
+ /* Read command timing */
+ pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave,
+ (cs5520_pio_clocks[pio].recovery << 4) |
+ (cs5520_pio_clocks[pio].assert));
+ /* Write command timing */
+ pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave,
+ (cs5520_pio_clocks[pio].recovery << 4) |
+ (cs5520_pio_clocks[pio].assert));
+}
+
+/**
+ * cs5520_enable_dma - turn on DMA bits
+ *
+ * Turn on the DMA bits for this disk. Needed because the BIOS probably
+ * has not done the work for us. Belongs in the core SATA code.
+ */
+
+static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev)
+{
+ /* Set the DMA enable/disable flag */
+ u8 reg = inb(ap->ioaddr.bmdma_addr + 0x02);
+ reg |= 1<<(adev->devno + 5);
+ outb(reg, ap->ioaddr.bmdma_addr + 0x02);
+}
+
+/**
+ * cs5520_set_dmamode - program DMA timings
+ * @ap: ATA port
+ * @adev: ATA device
+ *
+ * Program the DMA mode timings for the controller according to the pio
+ * clocking table. Note that this device sets the DMA timings to PIO
+ * mode values. This may seem bizarre but the 5520 architecture talks
+ * PIO mode to the disk and DMA mode to the controller so the underlying
+ * transfers are PIO timed.
+ */
+
+static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 };
+ cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]);
+ cs5520_enable_dma(ap, adev);
+}
+
+/**
+ * cs5520_set_piomode - program PIO timings
+ * @ap: ATA port
+ * @adev: ATA device
+ *
+ * Program the PIO mode timings for the controller according to the pio
+ * clocking table. We know pio_mode will equal dma_mode because of the
+ * CS5520 architecture. At least once we turned DMA on and wrote a
+ * mode setter.
+ */
+
+static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ cs5520_set_timings(ap, adev, adev->pio_mode);
+}
+
+
+static int cs5520_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+static void cs5520_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+static struct scsi_host_template cs5520_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations cs5520_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = cs5520_set_piomode,
+ .set_dmamode = cs5520_set_dmamode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = cs5520_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .eng_timeout = ata_eng_timeout,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ u8 pcicfg;
+ static struct ata_probe_ent probe[2];
+ int ports = 0;
+
+ /* IDE port enable bits */
+ pci_read_config_byte(dev, 0x60, &pcicfg);
+
+ /* Check if the ATA ports are enabled */
+ if ((pcicfg & 3) == 0)
+ return -ENODEV;
+
+ if ((pcicfg & 0x40) == 0) {
+ printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n");
+ pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
+ }
+
+ /* Perform set up for DMA */
+ if (pci_enable_device_bars(dev, 1<<2)) {
+ printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
+ return -ENODEV;
+ }
+ pci_set_master(dev);
+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+ printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
+ return -ENODEV;
+ }
+ if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
+ printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
+ return -ENODEV;
+ }
+
+ /* We have to do our own plumbing as the PCI setup for this
+ chipset is non-standard so we can't punt to the libata code */
+
+ INIT_LIST_HEAD(&probe[0].node);
+ probe[0].dev = pci_dev_to_dev(dev);
+ probe[0].port_ops = &cs5520_port_ops;
+ probe[0].sht = &cs5520_sht;
+ probe[0].pio_mask = 0x1F;
+ probe[0].mwdma_mask = id->driver_data;
+ probe[0].irq = 14;
+ probe[0].irq_flags = 0;
+ probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
+ probe[0].n_ports = 1;
+ probe[0].port[0].cmd_addr = 0x1F0;
+ probe[0].port[0].ctl_addr = 0x3F6;
+ probe[0].port[0].altstatus_addr = 0x3F6;
+ probe[0].port[0].bmdma_addr = pci_resource_start(dev, 2);
+
+ /* The secondary lurks at different addresses but is otherwise
+ the same beastie */
+
+ probe[1] = probe[0];
+ INIT_LIST_HEAD(&probe[1].node);
+ probe[1].irq = 15;
+ probe[1].port[0].cmd_addr = 0x170;
+ probe[1].port[0].ctl_addr = 0x376;
+ probe[1].port[0].altstatus_addr = 0x376;
+ probe[1].port[0].bmdma_addr = pci_resource_start(dev, 2) + 8;
+
+ /* Let libata fill in the port details */
+ ata_std_ports(&probe[0].port[0]);
+ ata_std_ports(&probe[1].port[0]);
+
+ /* Now add the ports that are active */
+ if (pcicfg & 1)
+ ports += ata_device_add(&probe[0]);
+ if (pcicfg & 2)
+ ports += ata_device_add(&probe[1]);
+ if (ports)
+ return 0;
+ return -ENODEV;
+}
+
+/**
+ * cs5520_remove_one - device unload
+ * @pdev: PCI device being removed
+ *
+ * Handle an unplug/unload event for a PCI device. Unload the
+ * PCI driver but do not use the default handler as we manage
+ * resources ourself and *MUST NOT* disable the device as it has
+ * other functions.
+ */
+
+static void __devexit cs5520_remove_one(struct pci_dev *pdev)
+{
+ struct device *dev = pci_dev_to_dev(pdev);
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_remove(host);
+ dev_set_drvdata(dev, NULL);
+}
+
+/* For now keep DMA off. We can set it for all but A rev CS5510 once the
+ core ATA code can handle it */
+
+static struct pci_device_id pata_cs5520[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
+ { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
+ { 0, },
+};
+
+static struct pci_driver cs5520_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pata_cs5520,
+ .probe = cs5520_init_one,
+ .remove = cs5520_remove_one
+};
+
+
+static int __init cs5520_init(void)
+{
+ return pci_register_driver(&cs5520_pci_driver);
+}
+
+static void __exit cs5520_exit(void)
+{
+ pci_unregister_driver(&cs5520_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pata_cs5520);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cs5520_init);
+module_exit(cs5520_exit);
+