summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_hpt366.c
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2008-03-25 12:22:47 +0900
committerJeff Garzik <jgarzik@redhat.com>2008-04-17 15:44:16 -0400
commitf08048e94564d009b19038cfbdd800aa83e79c7f (patch)
tree4afa7e4fff9ec716e9acbe746a464cda5daec063 /drivers/ata/pata_hpt366.c
parentb558edddb1c42c70a30cfe494984d4be409f7b2b (diff)
libata: PCI device should be powered up before being accessed
PCI device should be powered up or powered up before its PCI regsiters are accessed. Although PCI configuration register access is allowed in D3hot, PCI device is free to reset its status when transiting from D3hot to D0 causing configuration data to change. Many libata SFF drivers which use ata_pci_init_one() read and update configuration registers before calling ata_pci_init_one() which enables the PCI device. Also, in resume paths, some drivers access registers without resuming the PCI device. This patch adds a call to pcim_enable_device() in init path if register is accessed before calling ata_pci_init_one() and make resume paths first resume PCI devices, access PCI configuration regiters then resume ATA host. While at it... * cmd640 was strange in that it set ->resume even when CONFIG_PM is not. This is by-product of minimal build fix. Updated. * In cs5530, Don't BUG() on reinit failure. Just whine and fail resume. Signed-off-by: Tejun Heo <htejun@gmail.com>
Diffstat (limited to 'drivers/ata/pata_hpt366.c')
-rw-r--r--drivers/ata/pata_hpt366.c14
1 files changed, 13 insertions, 1 deletions
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a742efa0da2..a82089048f5 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -402,6 +402,11 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
u32 class_rev;
u32 reg1;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -435,8 +440,15 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int hpt36x_reinit_one(struct pci_dev *dev)
{
+ struct ata_host *host = dev_get_drvdata(&dev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(dev);
+ if (rc)
+ return rc;
hpt36x_init_chipset(dev);
- return ata_pci_device_resume(dev);
+ ata_host_resume(host);
+ return 0;
}
#endif