diff options
| author | Ingo Molnar <mingo@elte.hu> | 2009-01-18 18:37:14 +0100 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2009-01-18 18:37:14 +0100 |
| commit | b2b062b8163391c42b3219d466ca1ac9742b9c7b (patch) | |
| tree | f3f920c09b8de694b1bc1d4b878cfd2b0b98c913 /drivers/ata/pata_hpt3x3.c | |
| parent | a9de18eb761f7c1c860964b2e5addc1a35c7e861 (diff) | |
| parent | 99937d6455cea95405ac681c86a857d0fcd530bd (diff) | |
Merge branch 'core/percpu' into stackprotector
Conflicts:
arch/x86/include/asm/pda.h
arch/x86/include/asm/system.h
Also, moved include/asm-x86/stackprotector.h to arch/x86/include/asm.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/ata/pata_hpt3x3.c')
| -rw-r--r-- | drivers/ata/pata_hpt3x3.c | 49 |
1 files changed, 44 insertions, 5 deletions
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index f11a320337c..f19cc645881 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -23,7 +23,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x3" -#define DRV_VERSION "0.5.3" +#define DRV_VERSION "0.6.1" /** * hpt3x3_set_piomode - PIO setup @@ -80,14 +80,48 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev) r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ if (adev->dma_mode >= XFER_UDMA_0) - r2 |= (0x10 << dn); /* Ultra mode */ + r2 |= (0x01 << dn); /* Ultra mode */ else - r2 |= (0x01 << dn); /* MWDMA */ + r2 |= (0x10 << dn); /* MWDMA */ pci_write_config_dword(pdev, 0x44, r1); pci_write_config_dword(pdev, 0x48, r2); } -#endif /* CONFIG_PATA_HPT3X3_DMA */ + +/** + * hpt3x3_freeze - DMA workaround + * @ap: port to freeze + * + * When freezing an HPT3x3 we must stop any pending DMA before + * writing to the control register or the chip will hang + */ + +static void hpt3x3_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ ATA_DMA_START, + mmio + ATA_DMA_CMD); + ata_sff_dma_pause(ap); + ata_sff_freeze(ap); +} + +/** + * hpt3x3_bmdma_setup - DMA workaround + * @qc: Queued command + * + * When issuing BMDMA we must clean up the error/active bits in + * software on this device + */ + +static void hpt3x3_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 r = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + r |= ATA_DMA_INTR | ATA_DMA_ERR; + iowrite8(r, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + return ata_bmdma_setup(qc); +} /** * hpt3x3_atapi_dma - ATAPI DMA check @@ -101,18 +135,23 @@ static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc) return 1; } +#endif /* CONFIG_PATA_HPT3X3_DMA */ + static struct scsi_host_template hpt3x3_sht = { ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations hpt3x3_port_ops = { .inherits = &ata_bmdma_port_ops, - .check_atapi_dma= hpt3x3_atapi_dma, .cable_detect = ata_cable_40wire, .set_piomode = hpt3x3_set_piomode, #if defined(CONFIG_PATA_HPT3X3_DMA) .set_dmamode = hpt3x3_set_dmamode, + .bmdma_setup = hpt3x3_bmdma_setup, + .check_atapi_dma= hpt3x3_atapi_dma, + .freeze = hpt3x3_freeze, #endif + }; /** |