diff options
| author | Alan Cox <alan@redhat.com> | 2008-10-17 19:08:31 +0100 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-10-28 00:35:59 -0400 |
| commit | e7c0d217cdaa837d30bc265eddac4d176969fd68 (patch) | |
| tree | 72f4ccbfc074c003ac2a8d80308b715cfb269f87 /drivers/ata/pata_ninja32.c | |
| parent | 054e5f616b5becdc096b793407dc33fe379749ac (diff) | |
pata_ninja32: suspend/resume support
I had assumed that the standard recovery would be sufficient for this
hardware but it isn't. Fix up the other registers on resume as needed. See
bug #11735
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/pata_ninja32.c')
| -rw-r--r-- | drivers/ata/pata_ninja32.c | 43 |
1 files changed, 34 insertions, 9 deletions
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 5e76f96ec7e..4e466eae8b4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.0.1" +#define DRV_VERSION "0.1.1" /** @@ -88,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = { .set_piomode = ninja32_set_piomode, }; +static void ninja32_program(void __iomem *base) +{ + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x01, base + 0x03); /* Unknown */ + iowrite8(0x20, base + 0x04); /* WAIT0 */ + iowrite8(0x8f, base + 0x05); /* Unknown */ + iowrite8(0xa4, base + 0x1c); /* Unknown */ + iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ +} + static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ata_host *host; @@ -133,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); - iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ - iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ - iowrite8(0x01, base + 0x03); /* Unknown */ - iowrite8(0x20, base + 0x04); /* WAIT0 */ - iowrite8(0x8f, base + 0x05); /* Unknown */ - iowrite8(0xa4, base + 0x1c); /* Unknown */ - iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ + ninja32_program(base); /* FIXME: Should we disable them at remove ? */ return ata_host_activate(host, dev->irq, ata_sff_interrupt, IRQF_SHARED, &ninja32_sht); } +#ifdef CONFIG_PM + +static int ninja32_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ninja32_program(host->iomap[0]); + ata_host_resume(host); + return 0; +} +#endif + static const struct pci_device_id ninja32[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, @@ -155,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = { .name = DRV_NAME, .id_table = ninja32, .probe = ninja32_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ninja32_reinit_one, +#endif }; static int __init ninja32_init(void) |