[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 287 insertions, 0 deletions

diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
new file mode 100644
index 00000000000..9b42b9a5242
--- /dev/null
+++ b/drivers/ata/pata_sc1200.c
@@ -0,0 +1,287 @@
+/*
+ * New ATA layer SC1200 driver		Alan Cox <alan@redhat.com>
+ *
+ * TODO: Mode selection filtering
+ * TODO: Can't enable second channel until ATA core has serialize
+ * TODO: Needs custom DMA cleanup code
+ *
+ * Based very heavily on
+ *
+ * linux/drivers/ide/pci/sc1200.c		Version 0.91	28-Jan-2003
+ *
+ * Copyright (C) 2000-2002		Mark Lord <mlord@pobox.com>
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * 
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME	"sc1200"
+#define DRV_VERSION	"0.2.3"
+
+#define SC1200_REV_A	0x00
+#define SC1200_REV_B1	0x01
+#define SC1200_REV_B3	0x02
+#define SC1200_REV_C1	0x03
+#define SC1200_REV_D1	0x04
+
+/**
+ *	sc1200_clock	-	PCI clock
+ *
+ *	Return the PCI bus clocking for the SC1200 chipset configuration
+ *	in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz
+ */
+ 
+static int sc1200_clock(void)
+{
+	/* Magic registers that give us the chipset data */
+	u8 chip_id = inb(0x903C);
+	u8 silicon_rev = inb(0x903D);
+	u16 pci_clock;
+	
+	if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1)
+		return 0;	/* 33 MHz mode */
+
+	/* Clock generator configuration 0x901E its 8/9 are the PCI clocking
+	   0/3 is 33Mhz 1 is 48 2 is 66 */
+
+	pci_clock = inw(0x901E);
+	pci_clock >>= 8;
+	pci_clock &= 0x03;
+	if (pci_clock == 3)
+		pci_clock = 0;
+	return pci_clock;
+}
+
+/**
+ *	sc1200_set_piomode		-	PIO setup
+ *	@ap: ATA interface
+ *	@adev: device on the interface
+ *
+ *	Set our PIO requirements. This is fairly simple on the SC1200
+ */
+ 
+static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u32 pio_timings[4][5] = {
+		{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},	// format0  33Mhz
+		{0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010},	// format1, 33Mhz
+		{0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021},	// format1, 48Mhz
+		{0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}	// format1, 66Mhz
+	};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 format;
+	unsigned int reg = 0x40 + 0x10 * ap->port_no;
+	int mode = adev->pio_mode - XFER_PIO_0;
+	
+	pci_read_config_dword(pdev, reg + 4, &format);
+	format >>= 31;
+	format += sc1200_clock();
+	pci_write_config_dword(pdev, reg + 8 * adev->devno, 
+				pio_timings[format][mode]);
+}
+
+/**
+ *	sc1200_set_dmamode		-	DMA timing setup
+ *	@ap: ATA interface
+ *	@adev: Device being configured
+ *
+ *	We cannot mix MWDMA and UDMA without reloading timings each switch
+ *	master to slave.
+ */
+ 
+static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u32 udma_timing[3][3] = {
+		{ 0x00921250, 0x00911140, 0x00911030 },
+		{ 0x00932470, 0x00922260, 0x00922140 },
+		{ 0x009436A1, 0x00933481, 0x00923261 }
+	};
+	
+	static const u32 mwdma_timing[3][3] = {
+		{ 0x00077771, 0x00012121, 0x00002020 },
+		{ 0x000BBBB2, 0x00024241, 0x00013131 },
+		{ 0x000FFFF3, 0x00035352, 0x00015151 }
+	};
+	
+	int clock = sc1200_clock();
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	unsigned int reg = 0x40 + 0x10 * ap->port_no;
+	int mode = adev->dma_mode;
+	u32 format;
+
+	if (mode >= XFER_UDMA_0)
+		format = udma_timing[clock][mode - XFER_UDMA_0];
+	else
+		format = mwdma_timing[clock][mode - XFER_MW_DMA_0];
+	
+	if (adev->devno == 0) {
+		u32 timings;
+		
+		pci_read_config_dword(pdev, reg + 4, &timings);
+		timings &= 0x80000000UL;
+		timings |= format;
+		pci_write_config_dword(pdev, reg + 4, timings);
+	} else
+		pci_write_config_dword(pdev, reg + 12, format);
+}
+
+/**
+ *	sc1200_qc_issue_prot	-	command issue
+ *	@qc: command pending
+ *
+ *	Called when the libata layer is about to issue a command. We wrap
+ *	this interface so that we can load the correct ATA timings if
+ *	neccessary.  Specifically we have a problem that there is only
+ *	one MWDMA/UDMA bit.
+ */
+
+static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+	struct ata_device *prev = ap->private_data;
+
+	/* See if the DMA settings could be wrong */
+	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+		/* Maybe, but do the channels match MWDMA/UDMA ? */
+		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
+		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		    	/* Switch the mode bits */
+		    	sc1200_set_dmamode(ap, adev);
+	}
+
+	return ata_qc_issue_prot(qc);
+}
+
+static struct scsi_host_template sc1200_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations sc1200_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= sc1200_set_piomode,
+	.set_dmamode	= sc1200_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= sc1200_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};	
+
+/**
+ *	sc1200_init_one		-	Initialise an SC1200
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ *
+ *	Just throw the needed data at the libata helper and it does all
+ *	our work.
+ */
+ 
+static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &sc1200_sht,
+		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x07,
+		.port_ops = &sc1200_port_ops
+	};
+	static struct ata_port_info *port_info[2] = { &info, &info };
+	
+	/* Can't enable port 2 yet, see top comments */
+	return ata_pci_init_one(dev, port_info, 1);
+}
+
+static struct pci_device_id sc1200[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE), },
+	{ 0, },
+};
+
+static struct pci_driver sc1200_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= sc1200,
+	.probe 		= sc1200_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init sc1200_init(void)
+{
+	return pci_register_driver(&sc1200_pci_driver);
+}
+
+
+static void __exit sc1200_exit(void)
+{
+	pci_unregister_driver(&sc1200_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox, Mark Lord");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sc1200);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(sc1200_init);
+module_exit(sc1200_exit);