[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 568 insertions, 0 deletions

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
new file mode 100644
index 00000000000..2580e1606d9
--- /dev/null
+++ b/drivers/ata/pata_via.c
@@ -0,0 +1,568 @@
+/*
+ * pata_via.c 	- VIA PATA for new ATA layer
+ *			  (C) 2005-2006 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ *  Documentation
+ *	Most chipset documentation available under NDA only
+ *
+ *  VIA version guide
+ *	VIA VT82C561	-	early design, uses ata_generic currently
+ *	VIA VT82C576	-	MWDMA, 33Mhz
+ *	VIA VT82C586	-	MWDMA, 33Mhz
+ *	VIA VT82C586a	-	Added UDMA to 33Mhz
+ *	VIA VT82C586b	-	UDMA33
+ *	VIA VT82C596a	-	Nonfunctional UDMA66
+ *	VIA VT82C596b	-	Working UDMA66
+ *	VIA VT82C686	-	Nonfunctional UDMA66
+ *	VIA VT82C686a	-	Working UDMA66
+ *	VIA VT82C686b	-	Updated to UDMA100
+ *	VIA VT8231	-	UDMA100
+ *	VIA VT8233	-	UDMA100
+ *	VIA VT8233a	-	UDMA133
+ *	VIA VT8233c	-	UDMA100
+ *	VIA VT8235	-	UDMA133
+ *	VIA VT8237	-	UDMA133
+ *
+ *	Most registers remain compatible across chips. Others start reserved
+ *	and acquire sensible semantics if set to 1 (eg cable detect). A few
+ *	exceptions exist, notably around the FIFO settings.
+ *
+ *	One additional quirk of the VIA design is that like ALi they use few
+ *	PCI IDs for a lot of chips.
+ *
+ *	Based heavily on:
+ *
+ * Version 3.38
+ *
+ * VIA IDE driver for Linux. Supported southbridges:
+ *
+ *   vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
+ *   vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
+ *   vt8235, vt8237
+ *
+ * Copyright (c) 2000-2002 Vojtech Pavlik
+ *
+ * Based on the work of:
+ *	Michel Aubry
+ *	Jeff Garzik
+ *	Andre Hedrick
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_via"
+#define DRV_VERSION "0.1.13"
+
+/*
+ *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
+ *	driver.
+ */
+
+enum {
+	VIA_UDMA	= 0x007,
+	VIA_UDMA_NONE	= 0x000,
+	VIA_UDMA_33	= 0x001,
+	VIA_UDMA_66	= 0x002,
+	VIA_UDMA_100	= 0x003,
+	VIA_UDMA_133	= 0x004,
+	VIA_BAD_PREQ	= 0x010, /* Crashes if PREQ# till DDACK# set */
+	VIA_BAD_CLK66	= 0x020, /* 66 MHz clock doesn't work correctly */
+	VIA_SET_FIFO	= 0x040, /* Needs to have FIFO split set */
+	VIA_NO_UNMASK	= 0x080, /* Doesn't work with IRQ unmasking on */
+	VIA_BAD_ID	= 0x100, /* Has wrong vendor ID (0x1107) */
+	VIA_BAD_AST	= 0x200, /* Don't touch Address Setup Timing */
+	VIA_NO_ENABLES	= 0x400, /* Has no enablebits */
+};
+
+/*
+ * VIA SouthBridge chips.
+ */
+
+static const struct via_isa_bridge {
+	const char *name;
+	u16 id;
+	u8 rev_min;
+	u8 rev_max;
+	u16 flags;
+} via_isa_bridges[] = {
+	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt8233c",	PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, VIA_UDMA_100 },
+	{ "vt8233",	PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, VIA_UDMA_100 },
+	{ "vt8231",	PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, VIA_UDMA_100 },
+	{ "vt82c686b",	PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, VIA_UDMA_100 },
+	{ "vt82c686a",	PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, VIA_UDMA_66 },
+	{ "vt82c686",	PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
+	{ "vt82c596b",	PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, VIA_UDMA_66 },
+	{ "vt82c596a",	PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
+	{ "vt82c586a",	PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
+	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
+	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
+	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ NULL }
+};
+
+/**
+ *	via_cable_detect	-	cable detection
+ *	@ap: ATA port
+ *
+ *	Perform cable detection. Actually for the VIA case the BIOS
+ *	already did this for us. We read the values provided by the
+ *	BIOS. If you are using an 8235 in a non-PC configuration you
+ *	may need to update this code.
+ *
+ *	Hotplug also impacts on this.
+ */
+
+static int via_cable_detect(struct ata_port *ap) {
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 ata66;
+
+	pci_read_config_dword(pdev, 0x50, &ata66);
+	/* Check both the drive cable reporting bits, we might not have
+	   two drives */
+	if (ata66 & (0x10100000 >> (16 * ap->port_no)))
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+static int via_pre_reset(struct ata_port *ap)
+{
+	const struct via_isa_bridge *config = ap->host->private_data;
+
+	if (!(config->flags & VIA_NO_ENABLES)) {
+		static const struct pci_bits via_enable_bits[] = {
+			{ 0x40, 1, 0x02, 0x02 },
+			{ 0x40, 1, 0x01, 0x01 }
+		};
+
+		struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+		
+		if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) {
+			ata_port_disable(ap);
+			printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+			return 0;
+		}
+	}
+
+	if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)
+		ap->cbl = via_cable_detect(ap);
+	else
+		ap->cbl = ATA_CBL_PATA40;
+	return ata_std_prereset(ap);
+}
+
+
+/**
+ *	via_error_handler		-	reset for VIA chips
+ *	@ap: ATA port
+ *
+ *	Handle the reset callback for the later chips with cable detect
+ */
+
+static void via_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ *	via_do_set_mode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *	@mode: ATA mode being programmed
+ *	@tdiv: Clocks per PCI clock
+ *	@set_ast: Set to program address setup
+ *	@udma_type: UDMA mode/format of registers
+ *
+ *	Program the VIA registers for DMA and PIO modes. Uses the ata timing
+ *	support in order to compute modes.
+ *
+ *	FIXME: Hotplug will require we serialize multiple mode changes
+ *	on the two channels.
+ */
+
+static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_device *peer = ata_dev_pair(adev);
+	struct ata_timing t, p;
+	static int via_clock = 33333;	/* Bus clock in kHZ - ought to be tunable one day */
+	unsigned long T =  1000000000 / via_clock;
+	unsigned long UT = T/tdiv;
+	int ut;
+	int offset = 3 - (2*ap->port_no) - adev->devno;
+
+
+	/* Calculate the timing values we require */
+	ata_timing_compute(adev, mode, &t, T, UT);
+
+	/* We share 8bit timing so we must merge the constraints */
+	if (peer) {
+		if (peer->pio_mode) {
+			ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
+			ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
+		}
+	}
+
+	/* Address setup is programmable but breaks on UDMA133 setups */
+	if (set_ast) {
+		u8 setup;	/* 2 bits per drive */
+		int shift = 2 * offset;
+
+		pci_read_config_byte(pdev, 0x4C, &setup);
+		setup &= ~(3 << shift);
+		setup |= FIT(t.setup, 1, 4) << shift;	/* 1,4 or 1,4 - 1  FIXME */
+		pci_write_config_byte(pdev, 0x4C, setup);
+	}
+
+	/* Load the PIO mode bits */
+	pci_write_config_byte(pdev, 0x4F - ap->port_no,
+		((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+	pci_write_config_byte(pdev, 0x48 + offset,
+		((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+
+	/* Load the UDMA bits according to type */
+	switch(udma_type) {
+		default:
+			/* BUG() ? */
+			/* fall through */
+		case 33:
+			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+			break;
+		case 66:
+			ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+			break;
+		case 100:
+			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+			break;
+		case 133:
+			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+			break;
+	}
+	/* Set UDMA unless device is not UDMA capable */
+	if (udma_type)
+		pci_write_config_byte(pdev, 0x50 + offset, ut);
+}
+
+static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	const struct via_isa_bridge *config = ap->host->private_data;
+	int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
+	int mode = config->flags & VIA_UDMA;
+	static u8 tclock[5] = { 1, 1, 2, 3, 4 };
+	static u8 udma[5] = { 0, 33, 66, 100, 133 };
+
+	via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]);
+}
+
+static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	const struct via_isa_bridge *config = ap->host->private_data;
+	int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
+	int mode = config->flags & VIA_UDMA;
+	static u8 tclock[5] = { 1, 1, 2, 3, 4 };
+	static u8 udma[5] = { 0, 33, 66, 100, 133 };
+
+	via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
+}
+
+static struct scsi_host_template via_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations via_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= via_set_piomode,
+	.set_dmamode	= via_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= via_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations via_port_ops_noirq = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= via_set_piomode,
+	.set_dmamode	= via_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= via_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer_noirq,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+/**
+ *	via_init_one		-	discovery callback
+ *	@pdev: PCI device ID
+ *	@id: PCI table info
+ *
+ *	A VIA IDE interface has been discovered. Figure out what revision
+ *	and perform configuration work before handing it to the ATA layer
+ */
+
+static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	/* Early VIA without UDMA support */
+	static struct ata_port_info via_mwdma_info = {
+		.sht = &via_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.port_ops = &via_port_ops
+	};
+	/* Ditto with IRQ masking required */
+	static struct ata_port_info via_mwdma_info_borked = {
+		.sht = &via_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.port_ops = &via_port_ops_noirq,
+	};
+	/* VIA UDMA 33 devices (and borked 66) */
+	static struct ata_port_info via_udma33_info = {
+		.sht = &via_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x7,
+		.port_ops = &via_port_ops
+	};
+	/* VIA UDMA 66 devices */
+	static struct ata_port_info via_udma66_info = {
+		.sht = &via_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x1f,
+		.port_ops = &via_port_ops
+	};
+	/* VIA UDMA 100 devices */
+	static struct ata_port_info via_udma100_info = {
+		.sht = &via_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x3f,
+		.port_ops = &via_port_ops
+	};
+	/* UDMA133 with bad AST (All current 133) */
+	static struct ata_port_info via_udma133_info = {
+		.sht = &via_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x7f,	/* FIXME: should check north bridge */
+		.port_ops = &via_port_ops
+	};
+	struct ata_port_info *port_info[2], *type;
+	struct pci_dev *isa = NULL;
+	const struct via_isa_bridge *config;
+	static int printed_version;
+	u8 t;
+	u8 enable;
+	u32 timing;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	/* To find out how the IDE will behave and what features we
+	   actually have to look at the bridge not the IDE controller */
+	for (config = via_isa_bridges; config->id; config++)
+		if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
+			!!(config->flags & VIA_BAD_ID),
+			config->id, NULL))) {
+
+			pci_read_config_byte(isa, PCI_REVISION_ID, &t);
+			if (t >= config->rev_min &&
+			    t <= config->rev_max)
+				break;
+			pci_dev_put(isa);
+		}
+
+	if (!config->id) {
+		printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
+		return -ENODEV;
+	}
+	pci_dev_put(isa);
+
+	/* 0x40 low bits indicate enabled channels */
+	pci_read_config_byte(pdev, 0x40 , &enable);
+	enable &= 3;
+	if (enable == 0) {
+		return -ENODEV;
+	}
+
+	/* Initialise the FIFO for the enabled channels. */
+	if (config->flags & VIA_SET_FIFO) {
+		u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+		u8 fifo;
+
+		pci_read_config_byte(pdev, 0x43, &fifo);
+
+		/* Clear PREQ# until DDACK# for errata */
+		if (config->flags & VIA_BAD_PREQ)
+			fifo &= 0x7F;
+		else
+			fifo &= 0x9f;
+		/* Turn on FIFO for enabled channels */
+		fifo |= fifo_setting[enable];
+		pci_write_config_byte(pdev, 0x43, fifo);
+	}
+	/* Clock set up */
+	switch(config->flags & VIA_UDMA) {
+		case VIA_UDMA_NONE:
+			if (config->flags & VIA_NO_UNMASK)
+				type = &via_mwdma_info_borked;
+			else
+				type = &via_mwdma_info;
+			break;
+		case VIA_UDMA_33:
+			type = &via_udma33_info;
+			break;
+		case VIA_UDMA_66:
+			type = &via_udma66_info;
+			/* The 66 MHz devices require we enable the clock */
+			pci_read_config_dword(pdev, 0x50, &timing);
+			timing |= 0x80008;
+			pci_write_config_dword(pdev, 0x50, timing);
+			break;
+		case VIA_UDMA_100:
+			type = &via_udma100_info;
+			break;
+		case VIA_UDMA_133:
+			type = &via_udma133_info;
+			break;
+		default:
+			WARN_ON(1);
+			return -ENODEV;
+	}
+
+	if (config->flags & VIA_BAD_CLK66) {
+		/* Disable the 66MHz clock on problem devices */
+		pci_read_config_dword(pdev, 0x50, &timing);
+		timing &= ~0x80008;
+		pci_write_config_dword(pdev, 0x50, timing);
+	}
+
+	/* We have established the device type, now fire it up */
+	type->private_data = (void *)config;
+
+	port_info[0] = port_info[1] = type;
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id via[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), },
+	{ 0, },
+};
+
+static struct pci_driver via_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= via,
+	.probe 		= via_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init via_init(void)
+{
+	return pci_register_driver(&via_pci_driver);
+}
+
+
+static void __exit via_exit(void)
+{
+	pci_unregister_driver(&via_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for VIA PATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, via);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(via_init);
+module_exit(via_exit);