libata: convert the remaining SATA drivers to new init model

Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.

Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths.  This simplifies code quite a bit.

* init_one()'s now follow more consistent init order

* ahci_setup_port() and ahci_host_init() collapsed into
  ahci_init_one() for init order consistency

* sata_vsc uses port_info instead of setting fields manually

* in sata_svw, k2_board_info converted to port_info (info is now in
  port flags).  port number is honored now.

Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 37 insertions, 52 deletions

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 466b05b6711..0a1e417f309 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -118,7 +118,6 @@ static void sil_dev_config(struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
-static irqreturn_t sil_interrupt(int irq, void *dev_instance);
 static void sil_freeze(struct ata_port *ap);
 static void sil_thaw(struct ata_port *ap);
 
@@ -209,7 +208,6 @@ static const struct ata_port_operations sil_ops = {
 	.thaw			= sil_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= sil_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -221,7 +219,6 @@ static const struct ata_port_operations sil_ops = {
 static const struct ata_port_info sil_port_info[] = {
 	/* sil_3112 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -230,7 +227,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3112_no_sata_irq */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
 				  SIL_FLAG_NO_SATA_IRQ,
 		.pio_mask	= 0x1f,			/* pio0-4 */
@@ -240,7 +236,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3512 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -249,7 +244,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3114 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -598,10 +592,10 @@ static void sil_dev_config(struct ata_device *dev)
 	}
 }
 
-static void sil_init_controller(struct pci_dev *pdev,
-				int n_ports, unsigned long port_flags,
-				void __iomem *mmio_base)
+static void sil_init_controller(struct ata_host *host)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
 	u8 cls;
 	u32 tmp;
 	int i;
@@ -611,7 +605,7 @@ static void sil_init_controller(struct pci_dev *pdev,
 	if (cls) {
 		cls >>= 3;
 		cls++;  /* cls = (line_size/8)+1 */
-		for (i = 0; i < n_ports; i++)
+		for (i = 0; i < host->n_ports; i++)
 			writew(cls << 8 | cls,
 			       mmio_base + sil_port[i].fifo_cfg);
 	} else
@@ -619,10 +613,10 @@ static void sil_init_controller(struct pci_dev *pdev,
 			   "cache line size not set.  Driver may not function\n");
 
 	/* Apply R_ERR on DMA activate FIS errata workaround */
-	if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+	if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
 		int cnt;
 
-		for (i = 0, cnt = 0; i < n_ports; i++) {
+		for (i = 0, cnt = 0; i < host->n_ports; i++) {
 			tmp = readl(mmio_base + sil_port[i].sfis_cfg);
 			if ((tmp & 0x3) != 0x01)
 				continue;
@@ -635,7 +629,7 @@ static void sil_init_controller(struct pci_dev *pdev,
 		}
 	}
 
-	if (n_ports == 4) {
+	if (host->n_ports == 4) {
 		/* flip the magic "make 4 ports work" bit */
 		tmp = readl(mmio_base + sil_port[2].bmdma);
 		if ((tmp & SIL_INTR_STEERING) == 0)
@@ -647,15 +641,26 @@ static void sil_init_controller(struct pci_dev *pdev,
 static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
+	int board_id = ent->driver_data;
+	const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int n_ports, rc;
 	unsigned int i;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = 2;
+	if (board_id == sil_3114)
+		n_ports = 4;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -665,6 +670,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -673,45 +679,25 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
+	mmio_base = host->iomap[SIL_MMIO_BAR];
 
-	INIT_LIST_HEAD(&probe_ent->node);
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
-	probe_ent->sht = sil_port_info[ent->driver_data].sht;
-	probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
-	probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
-	probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
-	probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->port_flags = sil_port_info[ent->driver_data].flags;
-
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	mmio_base = probe_ent->iomap[SIL_MMIO_BAR];
-
-	for (i = 0; i < probe_ent->n_ports; i++) {
-		probe_ent->port[i].cmd_addr = mmio_base + sil_port[i].tf;
-		probe_ent->port[i].altstatus_addr =
-		probe_ent->port[i].ctl_addr = mmio_base + sil_port[i].ctl;
-		probe_ent->port[i].bmdma_addr = mmio_base + sil_port[i].bmdma;
-		probe_ent->port[i].scr_addr = mmio_base + sil_port[i].scr;
-		ata_std_ports(&probe_ent->port[i]);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+		ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
+		ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
+		ioaddr->scr_addr = mmio_base + sil_port[i].scr;
+		ata_std_ports(ioaddr);
 	}
 
-	sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
-			    mmio_base);
+	/* initialize and activate */
+	sil_init_controller(host);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
+				 &sil_sht);
 }
 
 #ifdef CONFIG_PM
@@ -724,8 +710,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev)
 	if (rc)
 		return rc;
 
-	sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
-			    host->iomap[SIL_MMIO_BAR]);
+	sil_init_controller(host);
 	ata_host_resume(host);
 
 	return 0;