Merge Linux 2.6.23

39 files changed, 233 insertions, 76 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 06f212ff2b4..c16820325d7 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -418,10 +418,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
-	{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */
-	{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */
-	{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */
-	{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */
+	{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
+	{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
+	{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
+	{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
+	{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
+	{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
 
 	/* VIA */
 	{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 430fcf4f9ef..94546695472 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.12"
+#define DRV_VERSION "0.2.13"
 
 /*
  *	A generic parallel ATA driver using libata
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 071d274afaa..6996eb5b750 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -94,7 +94,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.11"
+#define DRV_VERSION	"2.12"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -130,6 +130,7 @@ enum {
 	ich6m_sata_ahci		= 8,
 	ich8_sata_ahci		= 9,
 	piix_pata_mwdma		= 10,	/* PIIX3 MWDMA only */
+	tolapai_sata_ahci	= 11,
 
 	/* constants for mapping table */
 	P0			= 0,  /* port 0 */
@@ -253,6 +254,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
 	/* SATA Controller IDE (ICH9M) */
 	{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	/* SATA Controller IDE (Tolapai) */
+	{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
 
 	{ }	/* terminate list */
 };
@@ -441,12 +444,25 @@ static const struct piix_map_db ich8_map_db = {
 	},
 };
 
+static const struct piix_map_db tolapai_map_db = {
+        .mask = 0x3,
+        .port_enable = 0x3,
+        .map = {
+                /* PM   PS   SM   SS       MAP */
+                {  P0,  NA,  P1,  NA }, /* 00b */
+                {  RV,  RV,  RV,  RV }, /* 01b */
+                {  RV,  RV,  RV,  RV }, /* 10b */
+                {  RV,  RV,  RV,  RV },
+        },
+};
+
 static const struct piix_map_db *piix_map_db_table[] = {
 	[ich5_sata]		= &ich5_map_db,
 	[ich6_sata]		= &ich6_map_db,
 	[ich6_sata_ahci]	= &ich6_map_db,
 	[ich6m_sata_ahci]	= &ich6m_map_db,
 	[ich8_sata_ahci]	= &ich8_map_db,
+	[tolapai_sata_ahci]	= &tolapai_map_db,
 };
 
 static struct ata_port_info piix_port_info[] = {
@@ -560,6 +576,17 @@ static struct ata_port_info piix_port_info[] = {
 		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
 		.port_ops	= &piix_pata_ops,
 	},
+
+	/* tolapai_sata_ahci: 11: */
+	{
+		.sht		= &piix_sht,
+		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
+				  PIIX_FLAG_AHCI,
+		.pio_mask	= 0x1f,	/* pio0-4 */
+		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &piix_sata_ops,
+	},
 };
 
 static struct pci_bits piix_enable_bits[] = {
@@ -894,6 +921,13 @@ static int piix_broken_suspend(void)
 {
 	static struct dmi_system_id sysids[] = {
 		{
+			.ident = "TECRA M3",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
+			},
+		},
+		{
 			.ident = "TECRA M5",
 			.matches = {
 				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
@@ -908,6 +942,13 @@ static int piix_broken_suspend(void)
 			},
 		},
 		{
+			.ident = "Satellite U200",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
+			},
+		},
+		{
 			.ident = "Satellite U205",
 			.matches = {
 				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
@@ -921,7 +962,8 @@ static int piix_broken_suspend(void)
 				DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
 			},
 		},
-		{ }
+
+		{ }	/* terminate list */
 	};
 	static const char *oemstrs[] = {
 		"Tecra M3,",
@@ -1139,6 +1181,41 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
 	hpriv->map = map;
 }
 
+static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
+{
+	static struct dmi_system_id sysids[] = {
+		{
+			/* Clevo M570U sets IOCFG bit 18 if the cdrom
+			 * isn't used to boot the system which
+			 * disables the channel.
+			 */
+			.ident = "M570U",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
+				DMI_MATCH(DMI_PRODUCT_NAME, "M570U"),
+			},
+		},
+
+		{ }	/* terminate list */
+	};
+	u32 iocfg;
+
+	if (!dmi_check_system(sysids))
+		return;
+
+	/* The datasheet says that bit 18 is NOOP but certain systems
+	 * seem to use it to disable a channel.  Clear the bit on the
+	 * affected systems.
+	 */
+	pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg);
+	if (iocfg & (1 << 18)) {
+		dev_printk(KERN_INFO, &pdev->dev,
+			   "applying IOCFG bit18 quirk\n");
+		iocfg &= ~(1 << 18);
+		pci_write_config_dword(pdev, PIIX_IOCFG, iocfg);
+	}
+}
+
 /**
  *	piix_init_one - Register PIIX ATA PCI device with kernel services
  *	@pdev: PCI device to register
@@ -1200,6 +1277,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 			      piix_map_db_table[ent->driver_data]);
 	}
 
+	/* apply IOCFG bit18 quirk */
+	piix_iocfg_bit18_quirk(pdev);
+
 	/* On ICH5, some BIOSen disable the interrupt using the
 	 * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
 	 * On ICH6, this bit has the same effect, but only when
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 99d4fbffb0d..772be09b468 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1911,8 +1911,9 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->flags |= ATA_DFLAG_FLUSH_EXT;
 			}
 
-			if (ata_id_hpa_enabled(dev->id))
-				dev->n_sectors = ata_hpa_resize(dev);
+			if (!(dev->horkage & ATA_HORKAGE_BROKEN_HPA) &&
+			    ata_id_hpa_enabled(dev->id))
+ 				dev->n_sectors = ata_hpa_resize(dev);
 
 			/* config NCQ */
 			ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
@@ -3700,11 +3701,16 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
 		goto fail;
 
 	/* verify n_sectors hasn't changed */
-	if (dev->class == ATA_DEV_ATA && dev->n_sectors != n_sectors) {
+	if (dev->class == ATA_DEV_ATA && n_sectors &&
+	    dev->n_sectors != n_sectors) {
 		ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
 			       "%llu != %llu\n",
 			       (unsigned long long)n_sectors,
 			       (unsigned long long)dev->n_sectors);
+
+		/* restore original n_sectors */
+		dev->n_sectors = n_sectors;
+
 		rc = -ENODEV;
 		goto fail;
 	}
@@ -3772,6 +3778,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "Maxtor 6L250S0",     "BANC1G10",     ATA_HORKAGE_NONCQ },
 	{ "Maxtor 6B200M0",	"BANC1BM0",	ATA_HORKAGE_NONCQ },
 	{ "Maxtor 6B200M0",	"BANC1B10",	ATA_HORKAGE_NONCQ },
+	{ "Maxtor 7B250S0",	"BANC1B70",	ATA_HORKAGE_NONCQ, },
+	{ "Maxtor 7B300S0",	"BANC1B70",	ATA_HORKAGE_NONCQ },
+	{ "Maxtor 7V300F0",	"VA111630",	ATA_HORKAGE_NONCQ },
 	{ "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
 	 ATA_HORKAGE_NONCQ },
 	/* NCQ hard hangs device under heavier load, needs hard power cycle */
@@ -3788,9 +3797,14 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "WDC WD740ADFD-00NLR1", NULL,		ATA_HORKAGE_NONCQ, },
 	{ "FUJITSU MHV2080BH",	"00840028",	ATA_HORKAGE_NONCQ, },
 	{ "ST9160821AS",	"3.CLF",	ATA_HORKAGE_NONCQ, },
+	{ "ST3160812AS",	"3.AD",		ATA_HORKAGE_NONCQ, },
 	{ "SAMSUNG HD401LJ",	"ZZ100-15",	ATA_HORKAGE_NONCQ, },
 
-	/* Devices with NCQ limits */
+	/* devices which puke on READ_NATIVE_MAX */
+	{ "HDS724040KLSA80",	"KFAOA20N",	ATA_HORKAGE_BROKEN_HPA, },
+	{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
+	{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
+	{ "MAXTOR 6L080L4",	"A93.0500",	ATA_HORKAGE_BROKEN_HPA },
 
 	/* End Marker */
 	{ }
@@ -3980,6 +3994,11 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 	tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
 
 	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	/* A clean abort indicates an original or just out of spec drive
+	   and we should continue as we issue the setup based on the
+	   drive reported working geometry */
+	if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
+		err_mask = 0;
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
@@ -6020,6 +6039,7 @@ void ata_dev_init(struct ata_device *dev)
 	 */
 	spin_lock_irqsave(ap->lock, flags);
 	dev->flags &= ~ATA_DFLAG_INIT_MASK;
+	dev->horkage = 0;
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 1cce2198baa..8023167bbbe 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -297,7 +297,7 @@ void ata_bmdma_start (struct ata_queued_cmd *qc)
 	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 	iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 
-	/* Strictly, one may wish to issue a readb() here, to
+	/* Strictly, one may wish to issue an ioread8() here, to
 	 * flush the mmio write.  However, control also passes
 	 * to the hardware at this point, and it will interrupt
 	 * us when we are to resume control.  So, in effect,
@@ -307,6 +307,9 @@ void ata_bmdma_start (struct ata_queued_cmd *qc)
 	 * is expected, so I think it is best to not add a readb()
 	 * without first all the MMIO ATA cards/mobos.
 	 * Or maybe I'm just being paranoid.
+	 *
+	 * FIXME: The posting of this write means I/O starts are
+	 * unneccessarily delayed for MMIO
 	 */
 }
 
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index e8a28e94fe4..71bdc3b3189 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.4"
+#define DRV_VERSION "0.7.5"
 
 /*
  *	Cable special cases
@@ -48,6 +48,13 @@ static struct dmi_system_id cable_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
 		},
 	},
+	{
+		.ident = "Toshiba Satelite S1800-814",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b09facad63e..04048fcf630 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.3.9"
 
 /**
  *	timing_setup		-	shared timing computation and load
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 80509be49e7..86f85a2cab7 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
 
 enum {
 	ATIIXP_IDE_PIO_TIMING	= 0x40,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 7dc76e71bd5..e2459088cdc 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_cs5520"
-#define DRV_VERSION	"0.6.5"
+#define DRV_VERSION	"0.6.6"
 
 struct pio_clocks
 {
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 68f150a1e2f..c6066aa43ec 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"pata_cs5530"
-#define DRV_VERSION	"0.7.3"
+#define DRV_VERSION	"0.7.4"
 
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 91a396fa5b2..9e553c54203 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
 
 static struct scsi_host_template isapnp_sht = {
 	.module			= THIS_MODULE,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 430673be1df..5d8b91e70ec 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.7"
+#define DRV_VERSION "0.3.8"
 
 struct it821x_dev
 {
@@ -533,6 +533,10 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 	struct it821x_dev *itdev = ap->private_data;
 
+	/* Only use dma for transfers to/from the media. */
+	if (qc->nbytes < 2048)
+		return -EOPNOTSUPP;
+
 	/* No ATAPI DMA in smart mode */
 	if (itdev->smart)
 		return -EOPNOTSUPP;
@@ -587,7 +591,7 @@ static int it821x_port_start(struct ata_port *ap)
 	itdev->want[1][1] = ATA_ANY;
 	itdev->last_device = -1;
 
-	if (pdev->revision == 0x11) {
+	if (pdev->revision == 0x10) {
 		itdev->timing10 = 1;
 		/* Need to disable ATAPI DMA for this case */
 		if (!itdev->smart)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 4ca7fd6118d..5dea3584c6c 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -189,6 +189,9 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
 	data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
 
+	if (!data->cs0 || !data->cs1)
+		return -ENOMEM;
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq)
 		set_irq_type(irq, IRQT_RISING);
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 87594c04d3a..b45506f1ef7 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -44,10 +44,10 @@ static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline)
 		return -ENOMEM;
 	printk("BAR5:");
 	for(i = 0; i <= 0x0F; i++)
-		printk("%02X:%02X ", i, readb(barp + i));
+		printk("%02X:%02X ", i, ioread8(barp + i));
 	printk("\n");
 
-	devices = readl(barp + 0x0C);
+	devices = ioread32(barp + 0x0C);
 	pci_iounmap(pdev, barp);
 
 	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
@@ -192,6 +192,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 
 static const struct pci_device_id marvell_pci_tbl[] = {
 	{ PCI_DEVICE(0x11AB, 0x6101), },
+	{ PCI_DEVICE(0x11AB, 0x6121), },
+	{ PCI_DEVICE(0x11AB, 0x6123), },
 	{ PCI_DEVICE(0x11AB, 0x6145), },
 	{ }	/* terminate list */
 };
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 182e83c9047..099f4cdc4cd 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -24,7 +24,7 @@
 
 
 #define DRV_NAME	"mpc52xx_ata"
-#define DRV_VERSION	"0.1.0ac2"
+#define DRV_VERSION	"0.1.2"
 
 
 /* Private structures used by the driver */
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 6da23feed03..0f2b027624d 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.1"
+#define DRV_VERSION "0.3.2"
 
 /*
  *	Private data structure to glue stuff together
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 69a5aa4949f..bb64a986e8f 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_pdc2027x"
-#define DRV_VERSION	"0.9"
+#define DRV_VERSION	"1.0"
 #undef PDC_DEBUG
 
 #ifdef PDC_DEBUG
@@ -563,13 +563,13 @@ static long pdc_read_counter(struct ata_host *host)
 	u32 bccrl, bccrh, bccrlv, bccrhv;
 
 retry:
-	bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff;
-	bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff;
+	bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
+	bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
 	rmb();
 
 	/* Read the counter values again for verification */
-	bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff;
-	bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff;
+	bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
+	bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
 	rmb();
 
 	counter = (bccrh << 15) | bccrl;
@@ -692,16 +692,16 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
 	struct timeval start_time, end_time;
 	long pll_clock, usec_elapsed;
 
-	/* Read current counter value */
-	start_count = pdc_read_counter(host);
-	do_gettimeofday(&start_time);
-
 	/* Start the test mode */
 	scr = readl(mmio_base + PDC_SYS_CTL);
 	PDPRINTK("scr[%X]\n", scr);
 	writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
 	readl(mmio_base + PDC_SYS_CTL); /* flush */
 
+	/* Read current counter value */
+	start_count = pdc_read_counter(host);
+	do_gettimeofday(&start_time);
+
 	/* Let the counter run for 100 ms. */
 	mdelay(100);
 
@@ -719,7 +719,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
 	usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
 		(end_time.tv_usec - start_time.tv_usec);
 
-	pll_clock = (start_count - end_count) / 100 *
+	pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 *
 		(100000000 / usec_elapsed);
 
 	PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index a909f793ffc..5086d03f2d7 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -22,7 +22,7 @@
 #include <linux/pata_platform.h>
 
 #define DRV_NAME "pata_platform"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
 
 static int pio_mask = 1;
 
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index b8b2d11e418..5edf67b1f3b 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -40,7 +40,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sc1200"
-#define DRV_VERSION	"0.2.5"
+#define DRV_VERSION	"0.2.6"
 
 #define SC1200_REV_A	0x00
 #define SC1200_REV_B1	0x01
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 36cdbd2b0bd..2d048ef25a5 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME		"pata_scc"
-#define DRV_VERSION		"0.2"
+#define DRV_VERSION		"0.3"
 
 #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA		0x01b4
 
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 89691541fe5..0faf99c8f13 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.2"
 
 #define SVWKS_CSB5_REVISION_NEW	0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION	0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index b0cd52d6e3f..40395804a66 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.6"
+#define DRV_VERSION "0.4.7"
 
 #define SIL680_MMIO_BAR		5
 
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 66bd0e83ac0..cce2834b2b6 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -54,6 +54,7 @@ struct sis_laptop {
 static const struct sis_laptop sis_laptop[] = {
 	/* devid, subvendor, subdev */
 	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
+	{ 0x5513, 0x1734, 0x105F },	/* FSC Amilo A1630 */
 	/* end marker */
 	{ 0, }
 };
@@ -374,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	int drive_pci = sis_old_port_base(adev);
 	u16 timing;
 
+	/* MWDMA 0-2 and UDMA 0-5 */
 	const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
-	const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
+	const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
 
 	pci_read_config_word(pdev, drive_pci, &timing);
 
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 8c2813aa6cd..c0f43bb2595 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.1"
+#define DRV_VERSION "0.3.2"
 
 enum {
 	/*
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index f645fe22cd1..636c4f1a0b2 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -63,7 +63,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.1"
+#define DRV_VERSION "0.3.2"
 
 /*
  *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -97,6 +97,7 @@ static const struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -144,6 +145,9 @@ static int via_cable_override(struct pci_dev *pdev)
 	/* Systems by DMI */
 	if (dmi_check_system(cable_dmi_table))
 		return 1;
+	/* Arima W730-K8/Targa Visionary 811/... */
+	if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032)
+		return 1;
 	return 0;
 }
 
@@ -240,7 +244,6 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
 	int ut;
 	int offset = 3 - (2*ap->port_no) - adev->devno;
 
-
 	/* Calculate the timing values we require */
 	ata_timing_compute(adev, mode, &t, T, UT);
 
@@ -287,9 +290,17 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
 			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
 			break;
 	}
+
 	/* Set UDMA unless device is not UDMA capable */
-	if (udma_type)
-		pci_write_config_byte(pdev, 0x50 + offset, ut);
+	if (udma_type) {
+		u8 cable80_status;
+
+		/* Get 80-wire cable detection bit */
+		pci_read_config_byte(pdev, 0x50 + offset, &cable80_status);
+		cable80_status &= 0x10;
+
+		pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status);
+	}
 }
 
 static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index bec1de594de..5c79271401a 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pdc_adma"
-#define DRV_VERSION	"0.06"
+#define DRV_VERSION	"1.0"
 
 /* macro to calculate base address for ATA regs */
 #define ADMA_ATA_REGS(base,port_no)	((base) + ((port_no) * 0x40))
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index a9c948d7604..fdbed8ecdfc 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -28,7 +28,7 @@
 #include <scsi/scsi_device.h>
 
 #define DRV_NAME	"sata_inic162x"
-#define DRV_VERSION	"0.2"
+#define DRV_VERSION	"0.3"
 
 enum {
 	MMIO_BAR		= 5,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 3acf65e75eb..cb7dec97fee 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -72,7 +72,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.81"
+#define DRV_VERSION	"1.0"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -313,7 +313,10 @@ enum {
 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 
 enum {
-	MV_DMA_BOUNDARY		= 0xffffffffU,
+	/* DMA boundary 0xffff is required by the s/g splitting
+	 * we need on /length/ in mv_fill-sg().
+	 */
+	MV_DMA_BOUNDARY		= 0xffffU,
 
 	/* mask of register bits containing lower 32 bits
 	 * of EDMA request queue DMA address
@@ -448,7 +451,7 @@ static struct scsi_host_template mv5_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= MV_MAX_SG_CT,
+	.sg_tablesize		= MV_MAX_SG_CT / 2,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= 1,
@@ -466,7 +469,7 @@ static struct scsi_host_template mv6_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= MV_MAX_SG_CT,
+	.sg_tablesize		= MV_MAX_SG_CT / 2,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= 1,
@@ -1139,15 +1142,27 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
 		dma_addr_t addr = sg_dma_address(sg);
 		u32 sg_len = sg_dma_len(sg);
 
-		mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
-		mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
-		mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff);
+		while (sg_len) {
+			u32 offset = addr & 0xffff;
+			u32 len = sg_len;
+
+			if ((offset + sg_len > 0x10000))
+				len = 0x10000 - offset;
+
+			mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+			mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+			mv_sg->flags_size = cpu_to_le32(len);
 
-		if (ata_sg_is_last(sg, qc))
-			mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+			sg_len -= len;
+			addr += len;
+
+			if (!sg_len && ata_sg_is_last(sg, qc))
+				mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+
+			mv_sg++;
+			n_sg++;
+		}
 
-		mv_sg++;
-		n_sg++;
 	}
 
 	return n_sg;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0b58c4df6fd..40dc7313985 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -49,7 +49,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME			"sata_nv"
-#define DRV_VERSION			"3.4"
+#define DRV_VERSION			"3.5"
 
 #define NV_ADMA_DMA_BOUNDARY		0xffffffffUL
 
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index d39ebc23c4a..25698cf0dce 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.09"
+#define DRV_VERSION	"2.10"
 
 enum {
 	PDC_MAX_PORTS		= 4,
@@ -328,8 +328,8 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = {
 
 	{ PCI_VDEVICE(PROMISE, 0x3318), board_20319 },
 	{ PCI_VDEVICE(PROMISE, 0x3319), board_20319 },
-	{ PCI_VDEVICE(PROMISE, 0x3515), board_20319 },
-	{ PCI_VDEVICE(PROMISE, 0x3519), board_20319 },
+	{ PCI_VDEVICE(PROMISE, 0x3515), board_40518 },
+	{ PCI_VDEVICE(PROMISE, 0x3519), board_40518 },
 	{ PCI_VDEVICE(PROMISE, 0x3d17), board_40518 },
 	{ PCI_VDEVICE(PROMISE, 0x3d18), board_40518 },
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index c8f9242e7f4..5e1dfdda698 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -39,7 +39,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_qstor"
-#define DRV_VERSION	"0.08"
+#define DRV_VERSION	"0.09"
 
 enum {
 	QS_MMIO_BAR		= 4,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index db676375895..8c72e714b45 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil"
-#define DRV_VERSION	"2.2"
+#define DRV_VERSION	"2.3"
 
 enum {
 	SIL_MMIO_BAR		= 5,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 46fbbe7f121..233e8869339 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -30,7 +30,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.9"
+#define DRV_VERSION	"1.0"
 
 /*
  * Port request block (PRB) 32 bytes
@@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap)
 	u32 slot_stat, qc_active;
 	int rc;
 
+	/* If PCIX_IRQ_WOC, there's an inherent race window between
+	 * clearing IRQ pending status and reading PORT_SLOT_STAT
+	 * which may cause spurious interrupts afterwards.  This is
+	 * unavoidable and much better than losing interrupts which
+	 * happens if IRQ pending is cleared after reading
+	 * PORT_SLOT_STAT.
+	 */
+	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
+		writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
+
 	slot_stat = readl(port + PORT_SLOT_STAT);
 
 	if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
@@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap)
 		return;
 	}
 
-	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
-		writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
-
 	qc_active = slot_stat & ~HOST_SSTAT_ATTN;
 	rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
 	if (rc > 0)
@@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap)
 		return;
 	}
 
-	if (ata_ratelimit())
+	/* spurious interrupts are expected if PCIX_IRQ_WOC */
+	if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
 		ata_port_printk(ap, KERN_INFO, "spurious interrupt "
 			"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
 			slot_stat, ap->active_tag, ap->sactive);
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 31a2f55aae6..41c1d6e8f1f 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -43,7 +43,7 @@
 #include "sis.h"
 
 #define DRV_NAME	"sata_sis"
-#define DRV_VERSION	"0.8"
+#define DRV_VERSION	"1.0"
 
 enum {
 	sis_180			= 0,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 92e87707503..d9678e7bc3a 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -53,7 +53,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME	"sata_svw"
-#define DRV_VERSION	"2.2"
+#define DRV_VERSION	"2.3"
 
 enum {
 	/* ap->flags bits */
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 5193bd8647b..97aefdd87be 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -92,7 +92,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_sx4"
-#define DRV_VERSION	"0.11"
+#define DRV_VERSION	"0.12"
 
 
 enum {
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 78c28512f01..e6b8b45279a 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -36,7 +36,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_uli"
-#define DRV_VERSION	"1.2"
+#define DRV_VERSION	"1.3"
 
 enum {
 	uli_5289		= 0,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 86b7bfc1732..57fd30de8f0 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_via"
-#define DRV_VERSION	"2.2"
+#define DRV_VERSION	"2.3"
 
 enum board_ids_enum {
 	vt6420,
@@ -371,7 +371,7 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 };
-	pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]);
+	pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]);
 }
 
 static const unsigned int svia_bar_sizes[] = {
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 24344d0d057..1920915dfa2 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"2.2"
+#define DRV_VERSION	"2.3"
 
 enum {
 	VSC_MMIO_BAR			= 0,