Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-next

Alex writes:
This is the radeon drm-next request.  Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes

[airlied: fix up a bunch of conflicts from drm_order removal]

* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
  drm/radeon/dpm: make sure dc performance level limits are valid (CI)
  drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
  drm/radeon: gcc fixes for extended dpm tables
  drm/radeon: gcc fixes for kb/kv dpm
  drm/radeon: gcc fixes for ci dpm
  drm/radeon: gcc fixes for si dpm
  drm/radeon: gcc fixes for ni dpm
  drm/radeon: gcc fixes for trinity dpm
  drm/radeon: gcc fixes for sumo dpm
  drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
  drm/radeon: gcc fixes for rv6xx dpm
  drm/radeon: gcc fixes for radeon_atombios.c
  drm/radeon: enable UVD interrupts on CIK
  drm/radeon: fix init ordering for r600+
  drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
  drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
  drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
  radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
  drm/radeon/audio: set up the sads on DCE3.2 asics
  drm/radeon: fix handling of variable sized arrays for router objects
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem_dmabuf.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/radeon/cik.c
	drivers/gpu/drm/radeon/ni.c
	drivers/gpu/drm/radeon/r600.c

4 files changed, 12 insertions, 10 deletions

diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 1c41722bb7e..20fd337a573 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -289,24 +289,24 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
 
 	/* Disable sending Early R_OK.
 	 * With "cached read" HDD testing and multiple ports busy on a SATA
-	 * host controller, 3726 PMP will very rarely drop a deferred
+	 * host controller, 3x26 PMP will very rarely drop a deferred
 	 * R_OK that was intended for the host. Symptom will be all
 	 * 5 drives under test will timeout, get reset, and recover.
 	 */
-	if (vendor == 0x1095 && devid == 0x3726) {
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
 		u32 reg;
 
 		err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to read Sil3726 Private Register";
+			reason = "failed to read Sil3x26 Private Register";
 			goto fail;
 		}
 		reg &= ~0x1;
 		err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to write Sil3726 Private Register";
+			reason = "failed to write Sil3x26 Private Register";
 			goto fail;
 		}
 	}
@@ -383,8 +383,8 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	u16 devid = sata_pmp_gscr_devid(gscr);
 	struct ata_link *link;
 
-	if (vendor == 0x1095 && devid == 0x3726) {
-		/* sil3726 quirks */
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
+		/* sil3x26 quirks */
 		ata_for_each_link(link, ap, EDGE) {
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c
index 4ec7c04b3f8..26386f0b89a 100644
--- a/drivers/ata/pata_imx.c
+++ b/drivers/ata/pata_imx.c
@@ -237,6 +237,7 @@ static const struct of_device_id imx_pata_dt_ids[] = {
 		/* sentinel */
 	}
 };
+MODULE_DEVICE_TABLE(of, imx_pata_dt_ids);
 
 static struct platform_driver pata_imx_driver = {
 	.probe		= pata_imx_probe,
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 19720a0a4a6..851bd3f43ac 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -293,6 +293,7 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host,
 {
 	struct sata_fsl_host_priv *host_priv = host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
+	unsigned long flags;
 
 	if (count > ICC_MAX_INT_COUNT_THRESHOLD)
 		count = ICC_MAX_INT_COUNT_THRESHOLD;
@@ -305,12 +306,12 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host,
 			(count > ICC_MIN_INT_COUNT_THRESHOLD))
 		ticks = ICC_SAFE_INT_TICKS;
 
-	spin_lock(&host->lock);
+	spin_lock_irqsave(&host->lock, flags);
 	iowrite32((count << 24 | ticks), hcr_base + ICC);
 
 	intr_coalescing_count = count;
 	intr_coalescing_ticks = ticks;
-	spin_unlock(&host->lock);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n",
 			intr_coalescing_count, intr_coalescing_ticks);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index d047d92a456..e9a4f46d962 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -86,11 +86,11 @@ struct ecx_plat_data {
 
 #define SGPIO_SIGNALS			3
 #define ECX_ACTIVITY_BITS		0x300000
-#define ECX_ACTIVITY_SHIFT		2
+#define ECX_ACTIVITY_SHIFT		0
 #define ECX_LOCATE_BITS			0x80000
 #define ECX_LOCATE_SHIFT		1
 #define ECX_FAULT_BITS			0x400000
-#define ECX_FAULT_SHIFT			0
+#define ECX_FAULT_SHIFT			2
 static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port,
 				u32 shift)
 {