diff options
author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-15 16:51:54 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-15 16:51:54 -0700 |
commit | bc06cffdec85d487c77109dffcd2f285bdc502d3 (patch) | |
tree | adc6e6398243da87e66c56102840597a329183a0 /drivers/block/cciss_scsi.c | |
parent | d3502d7f25b22cfc9762bf1781faa9db1bb3be2e (diff) | |
parent | 9413d7b8aa777dd1fc7db9563ce5e80d769fe7b5 (diff) |
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
[SCSI] ibmvscsi: convert to use the data buffer accessors
[SCSI] dc395x: convert to use the data buffer accessors
[SCSI] ncr53c8xx: convert to use the data buffer accessors
[SCSI] sym53c8xx: convert to use the data buffer accessors
[SCSI] ppa: coding police and printk levels
[SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
[SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
[SCSI] remove the dead CYBERSTORMIII_SCSI option
[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
[SCSI] Clean up scsi_add_lun a bit
[SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
[SCSI] sni_53c710: Cleanup
[SCSI] qla4xxx: Fix underrun/overrun conditions
[SCSI] megaraid_mbox: use mutex instead of semaphore
[SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
[SCSI] qla2xxx: update version to 8.02.00-k1.
[SCSI] qla2xxx: add support for NPIV
[SCSI] stex: use resid for xfer len information
[SCSI] Add Brownie 1200U3P to blacklist
[SCSI] scsi.c: convert to use the data buffer accessors
...
Diffstat (limited to 'drivers/block/cciss_scsi.c')
-rw-r--r-- | drivers/block/cciss_scsi.c | 75 |
1 files changed, 22 insertions, 53 deletions
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 90961a8ea89..4aca7ddfddd 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -555,7 +555,6 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag) { struct scsi_cmnd *cmd; ctlr_info_t *ctlr; - u64bit addr64; ErrorInfo_struct *ei; ei = cp->err_info; @@ -569,20 +568,7 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag) cmd = (struct scsi_cmnd *) cp->scsi_cmd; ctlr = hba[cp->ctlr]; - /* undo the DMA mappings */ - - if (cmd->use_sg) { - pci_unmap_sg(ctlr->pdev, - cmd->request_buffer, cmd->use_sg, - cmd->sc_data_direction); - } - else if (cmd->request_bufflen) { - addr64.val32.lower = cp->SG[0].Addr.lower; - addr64.val32.upper = cp->SG[0].Addr.upper; - pci_unmap_single(ctlr->pdev, (dma_addr_t) addr64.val, - cmd->request_bufflen, - cmd->sc_data_direction); - } + scsi_dma_unmap(cmd); cmd->result = (DID_OK << 16); /* host byte */ cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ @@ -597,7 +583,7 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag) ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? SCSI_SENSE_BUFFERSIZE : ei->SenseLen); - cmd->resid = ei->ResidualCnt; + scsi_set_resid(cmd, ei->ResidualCnt); if(ei->CommandStatus != 0) { /* an error has occurred */ @@ -1204,46 +1190,29 @@ cciss_scatter_gather(struct pci_dev *pdev, CommandList_struct *cp, struct scsi_cmnd *cmd) { - unsigned int use_sg, nsegs=0, len; - struct scatterlist *scatter = (struct scatterlist *) cmd->request_buffer; + unsigned int len; + struct scatterlist *sg; __u64 addr64; - - /* is it just one virtual address? */ - if (!cmd->use_sg) { - if (cmd->request_bufflen) { /* anything to xfer? */ - - addr64 = (__u64) pci_map_single(pdev, - cmd->request_buffer, - cmd->request_bufflen, - cmd->sc_data_direction); - - cp->SG[0].Addr.lower = - (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); - cp->SG[0].Addr.upper = - (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); - cp->SG[0].Len = cmd->request_bufflen; - nsegs=1; - } - } /* else, must be a list of virtual addresses.... */ - else if (cmd->use_sg <= MAXSGENTRIES) { /* not too many addrs? */ - - use_sg = pci_map_sg(pdev, cmd->request_buffer, cmd->use_sg, - cmd->sc_data_direction); - - for (nsegs=0; nsegs < use_sg; nsegs++) { - addr64 = (__u64) sg_dma_address(&scatter[nsegs]); - len = sg_dma_len(&scatter[nsegs]); - cp->SG[nsegs].Addr.lower = - (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); - cp->SG[nsegs].Addr.upper = - (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); - cp->SG[nsegs].Len = len; - cp->SG[nsegs].Ext = 0; // we are not chaining + int use_sg, i; + + BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES); + + use_sg = scsi_dma_map(cmd); + if (use_sg) { /* not too many addrs? */ + scsi_for_each_sg(cmd, sg, use_sg, i) { + addr64 = (__u64) sg_dma_address(sg); + len = sg_dma_len(sg); + cp->SG[i].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Len = len; + cp->SG[i].Ext = 0; // we are not chaining } - } else BUG(); + } - cp->Header.SGList = (__u8) nsegs; /* no. SGs contig in this cmd */ - cp->Header.SGTotal = (__u16) nsegs; /* total sgs in this cmd list */ + cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */ return; } |