Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 79 insertions, 0 deletions

diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h
new file mode 100644
index 00000000000..5e7e06c07d6
--- /dev/null
+++ b/drivers/block/cciss_scsi.h
@@ -0,0 +1,79 @@
+/*
+ *    Disk Array driver for Compaq SA53xx Controllers, SCSI Tape module
+ *    Copyright 2001 Compaq Computer Corporation
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifdef CONFIG_CISS_SCSI_TAPE
+#ifndef _CCISS_SCSI_H_
+#define _CCISS_SCSI_H_
+
+#include <scsi/scsicam.h> /* possibly irrelevant, since we don't show disks */
+
+		// the scsi id of the adapter...
+#define SELF_SCSI_ID 15
+		// 15 is somewhat arbitrary, since the scsi-2 bus
+		// that's presented by the driver to the OS is
+		// fabricated.  The "real" scsi-3 bus the 
+		// hardware presents is fabricated too.
+		// The actual, honest-to-goodness physical
+		// bus that the devices are attached to is not 
+		// addressible natively, and may in fact turn
+		// out to be not scsi at all.
+
+#define SCSI_CCISS_CAN_QUEUE 2
+
+/* 
+
+Note, cmd_per_lun could give us some trouble, so I'm setting it very low.
+Likewise, SCSI_CCISS_CAN_QUEUE is set very conservatively.
+
+If the upper scsi layer tries to track how many commands we have 
+outstanding, it will be operating under the misapprehension that it is
+the only one sending us requests.  We also have the block interface,
+which is where most requests must surely come from, so the upper layer's
+notion of how many requests we have outstanding will be wrong most or
+all of the time. 
+
+Note, the normal SCSI mid-layer error handling doesn't work well
+for this driver because 1) it takes the io_request_lock before
+calling error handlers and uses a local variable to store flags,
+so the io_request_lock cannot be released and interrupts enabled
+inside the error handlers, and, the error handlers cannot poll
+for command completion because they might get commands from the
+block half of the driver completing, and not know what to do
+with them.  That's what we get for making a hybrid scsi/block
+driver, I suppose.
+
+*/
+
+struct cciss_scsi_dev_t {
+	int devtype;
+	int bus, target, lun;		/* as presented to the OS */
+	unsigned char scsi3addr[8];	/* as presented to the HW */
+};
+
+struct cciss_scsi_hba_t {
+	char *name;
+	int ndevices;
+#define CCISS_MAX_SCSI_DEVS_PER_HBA 16
+	struct cciss_scsi_dev_t dev[CCISS_MAX_SCSI_DEVS_PER_HBA];
+};
+
+#endif /* _CCISS_SCSI_H_ */
+#endif /* CONFIG_CISS_SCSI_TAPE */