block: remove struct request buffer member

This was used in the olden days, back when onions were proper
yellow. Basically it mapped to the current buffer to be
transferred. With highmem being added more than a decade ago,
most drivers map pages out of a bio, and rq->buffer isn't
pointing at anything valid.

Convert old style drivers to just use bio_data().

For the discard payload use case, just reference the page
in the bio.

Signed-off-by: Jens Axboe <axboe@fb.com>

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 8f5565bf34c..5f69c910c3a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -2351,7 +2351,7 @@ static void rw_interrupt(void)
 	}
 
 	if (CT(COMMAND) != FD_READ ||
-	    raw_cmd->kernel_data == current_req->buffer) {
+	    raw_cmd->kernel_data == bio_data(current_req->bio)) {
 		/* transfer directly from buffer */
 		cont->done(1);
 	} else if (CT(COMMAND) == FD_READ) {
@@ -2640,7 +2640,7 @@ static int make_raw_rw_request(void)
 		raw_cmd->flags &= ~FD_RAW_WRITE;
 		raw_cmd->flags |= FD_RAW_READ;
 		COMMAND = FM_MODE(_floppy, FD_READ);
-	} else if ((unsigned long)current_req->buffer < MAX_DMA_ADDRESS) {
+	} else if ((unsigned long)bio_data(current_req->bio) < MAX_DMA_ADDRESS) {
 		unsigned long dma_limit;
 		int direct, indirect;
 
@@ -2654,13 +2654,13 @@ static int make_raw_rw_request(void)
 		 */
 		max_size = buffer_chain_size();
 		dma_limit = (MAX_DMA_ADDRESS -
-			     ((unsigned long)current_req->buffer)) >> 9;
+			     ((unsigned long)bio_data(current_req->bio))) >> 9;
 		if ((unsigned long)max_size > dma_limit)
 			max_size = dma_limit;
 		/* 64 kb boundaries */
-		if (CROSS_64KB(current_req->buffer, max_size << 9))
+		if (CROSS_64KB(bio_data(current_req->bio), max_size << 9))
 			max_size = (K_64 -
-				    ((unsigned long)current_req->buffer) %
+				    ((unsigned long)bio_data(current_req->bio)) %
 				    K_64) >> 9;
 		direct = transfer_size(ssize, max_sector, max_size) - fsector_t;
 		/*
@@ -2677,7 +2677,7 @@ static int make_raw_rw_request(void)
 		       (DP->read_track & (1 << DRS->probed_format)))))) {
 			max_size = blk_rq_sectors(current_req);
 		} else {
-			raw_cmd->kernel_data = current_req->buffer;
+			raw_cmd->kernel_data = bio_data(current_req->bio);
 			raw_cmd->length = current_count_sectors << 9;
 			if (raw_cmd->length == 0) {
 				DPRINT("%s: zero dma transfer attempted\n", __func__);
@@ -2731,7 +2731,7 @@ static int make_raw_rw_request(void)
 	raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1;
 	raw_cmd->length <<= 9;
 	if ((raw_cmd->length < current_count_sectors << 9) ||
-	    (raw_cmd->kernel_data != current_req->buffer &&
+	    (raw_cmd->kernel_data != bio_data(current_req->bio) &&
 	     CT(COMMAND) == FD_WRITE &&
 	     (aligned_sector_t + (raw_cmd->length >> 9) > buffer_max ||
 	      aligned_sector_t < buffer_min)) ||
@@ -2739,7 +2739,7 @@ static int make_raw_rw_request(void)
 	    raw_cmd->length <= 0 || current_count_sectors <= 0) {
 		DPRINT("fractionary current count b=%lx s=%lx\n",
 		       raw_cmd->length, current_count_sectors);
-		if (raw_cmd->kernel_data != current_req->buffer)
+		if (raw_cmd->kernel_data != bio_data(current_req->bio))
 			pr_info("addr=%d, length=%ld\n",
 				(int)((raw_cmd->kernel_data -
 				       floppy_track_buffer) >> 9),
@@ -2756,7 +2756,7 @@ static int make_raw_rw_request(void)
 		return 0;
 	}
 
-	if (raw_cmd->kernel_data != current_req->buffer) {
+	if (raw_cmd->kernel_data != bio_data(current_req->bio)) {
 		if (raw_cmd->kernel_data < floppy_track_buffer ||
 		    current_count_sectors < 0 ||
 		    raw_cmd->length < 0 ||