Merge branch 'linux-2.6' into next

4 files changed, 41 insertions, 18 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 61ad8d639ba..0344a8a8321 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -21,7 +21,8 @@ config BLK_DEV_FD
 	---help---
 	  If you want to use the floppy disk drive(s) of your PC under Linux,
 	  say Y. Information about this driver, especially important for IBM
-	  Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+	  Thinkpad users, is contained in
+	  <file:Documentation/blockdev/floppy.txt>.
 	  That file also contains the location of the Floppy driver FAQ as
 	  well as location of the fdutils package used to configure additional
 	  parameters of the driver at run time.
@@ -76,7 +77,7 @@ config PARIDE
 	  your computer's parallel port. Most of them are actually IDE devices
 	  using a parallel port IDE adapter. This option enables the PARIDE
 	  subsystem which contains drivers for many of these external drives.
-	  Read <file:Documentation/paride.txt> for more information.
+	  Read <file:Documentation/blockdev/paride.txt> for more information.
 
 	  If you have said Y to the "Parallel-port support" configuration
 	  option, you may share a single port between your printer and other
@@ -114,9 +115,9 @@ config BLK_CPQ_DA
 	help
 	  This is the driver for Compaq Smart Array controllers.  Everyone
 	  using these boards should say Y here.  See the file
-	  <file:Documentation/cpqarray.txt> for the current list of boards
-	  supported by this driver, and for further information on the use of
-	  this driver.
+	  <file:Documentation/blockdev/cpqarray.txt> for the current list of
+	  boards supported by this driver, and for further information on the
+	  use of this driver.
 
 config BLK_CPQ_CISS_DA
 	tristate "Compaq Smart Array 5xxx support"
@@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA
 	help
 	  This is the driver for Compaq Smart Array 5xxx controllers.
 	  Everyone using these boards should say Y here.
-	  See <file:Documentation/cciss.txt> for the current list of
+	  See <file:Documentation/blockdev/cciss.txt> for the current list of
 	  boards supported by this driver, and for further information
 	  on the use of this driver.
 
@@ -135,7 +136,7 @@ config CISS_SCSI_TAPE
 	help
 	  When enabled (Y), this option allows SCSI tape drives and SCSI medium
 	  changers (tape robots) to be accessed via a Compaq 5xxx array 
-	  controller.  (See <file:Documentation/cciss.txt> for more details.)
+	  controller.  (See <file:Documentation/blockdev/cciss.txt> for more details.)
 
 	  "SCSI support" and "SCSI tape support" must also be enabled for this 
 	  option to work.
@@ -149,8 +150,8 @@ config BLK_DEV_DAC960
 	help
 	  This driver adds support for the Mylex DAC960, AcceleRAID, and
 	  eXtremeRAID PCI RAID controllers.  See the file
-	  <file:Documentation/README.DAC960> for further information about
-	  this driver.
+	  <file:Documentation/blockdev/README.DAC960> for further information
+	  about this driver.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called DAC960.
@@ -278,9 +279,9 @@ config BLK_DEV_NBD
 	  userland (making server and client physically the same computer,
 	  communicating using the loopback network device).
 
-	  Read <file:Documentation/nbd.txt> for more information, especially
-	  about where to find the server code, which runs in user space and
-	  does not need special kernel support.
+	  Read <file:Documentation/blockdev/nbd.txt> for more information,
+	  especially about where to find the server code, which runs in user
+	  space and does not need special kernel support.
 
 	  Note that this has nothing to do with the network file systems NFS
 	  or Coda; you can say N here even if you intend to use NFS or Coda.
@@ -321,8 +322,8 @@ config BLK_DEV_RAM
 	  store a copy of a minimal root file system off of a floppy into RAM
 	  during the initial install of Linux.
 
-	  Note that the kernel command line option "ramdisk=XX" is now
-	  obsolete. For details, read <file:Documentation/ramdisk.txt>.
+	  Note that the kernel command line option "ramdisk=XX" is now obsolete.
+	  For details, read <file:Documentation/blockdev/ramdisk.txt>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rd.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 14db747a636..cf29cc4e6ab 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str)
 		printk("\n");
 	} else
 		DPRINT("botched floppy option\n");
-	DPRINT("Read Documentation/floppy.txt\n");
+	DPRINT("Read Documentation/blockdev/floppy.txt\n");
 	return 0;
 }
 
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index fccac18d311..048d71d244d 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 
 /*
  * Reset management
- * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
- * XXX Make usb_sync_reset asynchronous.
  */
 
 static void ub_reset_enter(struct ub_dev *sc, int try)
@@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work)
 }
 
 /*
+ * XXX Reset brackets are too much hassle to implement, so just stub them
+ * in order to prevent forced unbinding (which deadlocks solid when our
+ * ->disconnect method waits for the reset to complete and this kills keventd).
+ *
+ * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
+ * or else the post_reset is invoked, and restats I/O on a locked device.
+ */
+static int ub_pre_reset(struct usb_interface *iface) {
+	return 0;
+}
+
+static int ub_post_reset(struct usb_interface *iface) {
+	return 0;
+}
+
+/*
  * This is called from a process context.
  */
 static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
@@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = {
 	.probe =	ub_probe,
 	.disconnect =	ub_disconnect,
 	.id_table =	ub_usb_ids,
+	.pre_reset =	ub_pre_reset,
+	.post_reset =	ub_post_reset,
 };
 
 static int __init ub_init(void)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b220c686089..2d19f0cc47f 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -338,12 +338,18 @@ wait:
 static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
 {
 	struct request_queue *rq;
+	elevator_t *old_e;
 
 	rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
 	if (rq == NULL)
 		return -1;
 
-	elevator_init(rq, "noop");
+	old_e = rq->elevator;
+	if (IS_ERR_VALUE(elevator_init(rq, "noop")))
+		printk(KERN_WARNING
+			"blkfront: Switch elevator failed, use default\n");
+	else
+		elevator_exit(old_e);
 
 	/* Hard sector size and max sectors impersonate the equiv. hardware. */
 	blk_queue_hardsect_size(rq, sector_size);