Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1114 insertions, 0 deletions

diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
new file mode 100644
index 00000000000..e481cc411b5
--- /dev/null
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -0,0 +1,1114 @@
+/*
+ *
+ *  Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)
+ *
+ *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *  The initial developer of the original code is David A. Hinds
+ *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/wait.h>
+
+#include <linux/skbuff.h>
+#include <asm/io.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+
+
+/* ======================== Module parameters ======================== */
+
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)");
+MODULE_LICENSE("GPL");
+
+
+
+/* ======================== Local structures ======================== */
+
+
+typedef struct bluecard_info_t {
+	dev_link_t link;
+	dev_node_t node;
+
+	struct hci_dev *hdev;
+
+	spinlock_t lock;		/* For serializing operations */
+	struct timer_list timer;	/* For LED control */
+
+	struct sk_buff_head txq;
+	unsigned long tx_state;
+
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+
+	unsigned char ctrl_reg;
+	unsigned long hw_state;		/* Status of the hardware and LED control */
+} bluecard_info_t;
+
+
+static void bluecard_config(dev_link_t *link);
+static void bluecard_release(dev_link_t *link);
+static int bluecard_event(event_t event, int priority, event_callback_args_t *args);
+
+static dev_info_t dev_info = "bluecard_cs";
+
+static dev_link_t *bluecard_attach(void);
+static void bluecard_detach(dev_link_t *);
+
+static dev_link_t *dev_list = NULL;
+
+
+/* Default baud rate: 57600, 115200, 230400 or 460800 */
+#define DEFAULT_BAUD_RATE  230400
+
+
+/* Hardware states */
+#define CARD_READY             1
+#define CARD_HAS_PCCARD_ID     4
+#define CARD_HAS_POWER_LED     5
+#define CARD_HAS_ACTIVITY_LED  6
+
+/* Transmit states  */
+#define XMIT_SENDING         1
+#define XMIT_WAKEUP          2
+#define XMIT_BUFFER_NUMBER   5	/* unset = buffer one, set = buffer two */
+#define XMIT_BUF_ONE_READY   6
+#define XMIT_BUF_TWO_READY   7
+#define XMIT_SENDING_READY   8
+
+/* Receiver states */
+#define RECV_WAIT_PACKET_TYPE   0
+#define RECV_WAIT_EVENT_HEADER  1
+#define RECV_WAIT_ACL_HEADER    2
+#define RECV_WAIT_SCO_HEADER    3
+#define RECV_WAIT_DATA          4
+
+/* Special packet types */
+#define PKT_BAUD_RATE_57600   0x80
+#define PKT_BAUD_RATE_115200  0x81
+#define PKT_BAUD_RATE_230400  0x82
+#define PKT_BAUD_RATE_460800  0x83
+
+
+/* These are the register offsets */
+#define REG_COMMAND     0x20
+#define REG_INTERRUPT   0x21
+#define REG_CONTROL     0x22
+#define REG_RX_CONTROL  0x24
+#define REG_CARD_RESET  0x30
+#define REG_LED_CTRL    0x30
+
+/* REG_COMMAND */
+#define REG_COMMAND_TX_BUF_ONE  0x01
+#define REG_COMMAND_TX_BUF_TWO  0x02
+#define REG_COMMAND_RX_BUF_ONE  0x04
+#define REG_COMMAND_RX_BUF_TWO  0x08
+#define REG_COMMAND_RX_WIN_ONE  0x00
+#define REG_COMMAND_RX_WIN_TWO  0x10
+
+/* REG_CONTROL */
+#define REG_CONTROL_BAUD_RATE_57600   0x00
+#define REG_CONTROL_BAUD_RATE_115200  0x01
+#define REG_CONTROL_BAUD_RATE_230400  0x02
+#define REG_CONTROL_BAUD_RATE_460800  0x03
+#define REG_CONTROL_RTS               0x04
+#define REG_CONTROL_BT_ON             0x08
+#define REG_CONTROL_BT_RESET          0x10
+#define REG_CONTROL_BT_RES_PU         0x20
+#define REG_CONTROL_INTERRUPT         0x40
+#define REG_CONTROL_CARD_RESET        0x80
+
+/* REG_RX_CONTROL */
+#define RTS_LEVEL_SHIFT_BITS  0x02
+
+
+
+/* ======================== LED handling routines ======================== */
+
+
+static void bluecard_activity_led_timeout(u_long arg)
+{
+	bluecard_info_t *info = (bluecard_info_t *)arg;
+	unsigned int iobase = info->link.io.BasePort1;
+
+	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
+		return;
+
+	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
+		/* Disable activity LED */
+		outb(0x08 | 0x20, iobase + 0x30);
+	} else {
+		/* Disable power LED */
+		outb(0x00, iobase + 0x30);
+	}
+}
+
+
+static void bluecard_enable_activity_led(bluecard_info_t *info)
+{
+	unsigned int iobase = info->link.io.BasePort1;
+
+	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
+		return;
+
+	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
+		/* Enable activity LED */
+		outb(0x10 | 0x40, iobase + 0x30);
+
+		/* Stop the LED after HZ/4 */
+		mod_timer(&(info->timer), jiffies + HZ / 4);
+	} else {
+		/* Enable power LED */
+		outb(0x08 | 0x20, iobase + 0x30);
+
+		/* Stop the LED after HZ/2 */
+		mod_timer(&(info->timer), jiffies + HZ / 2);
+	}
+}
+
+
+
+/* ======================== Interrupt handling ======================== */
+
+
+static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len)
+{
+	int i, actual;
+
+	actual = (len > 15) ? 15 : len;
+
+	outb_p(actual, iobase + offset);
+
+	for (i = 0; i < actual; i++)
+		outb_p(buf[i], iobase + offset + i + 1);
+
+	return actual;
+}
+
+
+static void bluecard_write_wakeup(bluecard_info_t *info)
+{
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	if (!test_bit(XMIT_SENDING_READY, &(info->tx_state)))
+		return;
+
+	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
+		set_bit(XMIT_WAKEUP, &(info->tx_state));
+		return;
+	}
+
+	do {
+		register unsigned int iobase = info->link.io.BasePort1;
+		register unsigned int offset;
+		register unsigned char command;
+		register unsigned long ready_bit;
+		register struct sk_buff *skb;
+		register int len;
+
+		clear_bit(XMIT_WAKEUP, &(info->tx_state));
+
+		if (!(info->link.state & DEV_PRESENT))
+			return;
+
+		if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) {
+			if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state)))
+				break;
+			offset = 0x10;
+			command = REG_COMMAND_TX_BUF_TWO;
+			ready_bit = XMIT_BUF_TWO_READY;
+		} else {
+			if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state)))
+				break;
+			offset = 0x00;
+			command = REG_COMMAND_TX_BUF_ONE;
+			ready_bit = XMIT_BUF_ONE_READY;
+		}
+
+		if (!(skb = skb_dequeue(&(info->txq))))
+			break;
+
+		if (skb->pkt_type & 0x80) {
+			/* Disable RTS */
+			info->ctrl_reg |= REG_CONTROL_RTS;
+			outb(info->ctrl_reg, iobase + REG_CONTROL);
+		}
+
+		/* Activate LED */
+		bluecard_enable_activity_led(info);
+
+		/* Send frame */
+		len = bluecard_write(iobase, offset, skb->data, skb->len);
+
+		/* Tell the FPGA to send the data */
+		outb_p(command, iobase + REG_COMMAND);
+
+		/* Mark the buffer as dirty */
+		clear_bit(ready_bit, &(info->tx_state));
+
+		if (skb->pkt_type & 0x80) {
+			DECLARE_WAIT_QUEUE_HEAD(wq);
+			DEFINE_WAIT(wait);
+
+			unsigned char baud_reg;
+
+			switch (skb->pkt_type) {
+			case PKT_BAUD_RATE_460800:
+				baud_reg = REG_CONTROL_BAUD_RATE_460800;
+				break;
+			case PKT_BAUD_RATE_230400:
+				baud_reg = REG_CONTROL_BAUD_RATE_230400;
+				break;
+			case PKT_BAUD_RATE_115200:
+				baud_reg = REG_CONTROL_BAUD_RATE_115200;
+				break;
+			case PKT_BAUD_RATE_57600:
+				/* Fall through... */
+			default:
+				baud_reg = REG_CONTROL_BAUD_RATE_57600;
+				break;
+			}
+
+			/* Wait until the command reaches the baseband */
+			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
+			schedule_timeout(HZ/10);
+			finish_wait(&wq, &wait);
+
+			/* Set baud on baseband */
+			info->ctrl_reg &= ~0x03;
+			info->ctrl_reg |= baud_reg;
+			outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+			/* Enable RTS */
+			info->ctrl_reg &= ~REG_CONTROL_RTS;
+			outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+			/* Wait before the next HCI packet can be send */
+			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
+			schedule_timeout(HZ);
+			finish_wait(&wq, &wait);
+		}
+
+		if (len == skb->len) {
+			kfree_skb(skb);
+		} else {
+			skb_pull(skb, len);
+			skb_queue_head(&(info->txq), skb);
+		}
+
+		info->hdev->stat.byte_tx += len;
+
+		/* Change buffer */
+		change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state));
+
+	} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
+
+	clear_bit(XMIT_SENDING, &(info->tx_state));
+}
+
+
+static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size)
+{
+	int i, n, len;
+
+	outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND);
+
+	len = inb(iobase + offset);
+	n = 0;
+	i = 1;
+
+	while (n < len) {
+
+		if (i == 16) {
+			outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND);
+			i = 0;
+		}
+
+		buf[n] = inb(iobase + offset + i);
+
+		n++;
+		i++;
+
+	}
+
+	return len;
+}
+
+
+static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
+{
+	unsigned int iobase;
+	unsigned char buf[31];
+	int i, len;
+
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	iobase = info->link.io.BasePort1;
+
+	if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
+		bluecard_enable_activity_led(info);
+
+	len = bluecard_read(iobase, offset, buf, sizeof(buf));
+
+	for (i = 0; i < len; i++) {
+
+		/* Allocate packet */
+		if (info->rx_skb == NULL) {
+			info->rx_state = RECV_WAIT_PACKET_TYPE;
+			info->rx_count = 0;
+			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+				BT_ERR("Can't allocate mem for new packet");
+				return;
+			}
+		}
+
+		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
+
+			info->rx_skb->dev = (void *) info->hdev;
+			info->rx_skb->pkt_type = buf[i];
+
+			switch (info->rx_skb->pkt_type) {
+
+			case 0x00:
+				/* init packet */
+				if (offset != 0x00) {
+					set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
+					set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
+					set_bit(XMIT_SENDING_READY, &(info->tx_state));
+					bluecard_write_wakeup(info);
+				}
+
+				kfree_skb(info->rx_skb);
+				info->rx_skb = NULL;
+				break;
+
+			case HCI_EVENT_PKT:
+				info->rx_state = RECV_WAIT_EVENT_HEADER;
+				info->rx_count = HCI_EVENT_HDR_SIZE;
+				break;
+
+			case HCI_ACLDATA_PKT:
+				info->rx_state = RECV_WAIT_ACL_HEADER;
+				info->rx_count = HCI_ACL_HDR_SIZE;
+				break;
+
+			case HCI_SCODATA_PKT:
+				info->rx_state = RECV_WAIT_SCO_HEADER;
+				info->rx_count = HCI_SCO_HDR_SIZE;
+				break;
+
+			default:
+				/* unknown packet */
+				BT_ERR("Unknown HCI packet with type 0x%02x received", info->rx_skb->pkt_type);
+				info->hdev->stat.err_rx++;
+
+				kfree_skb(info->rx_skb);
+				info->rx_skb = NULL;
+				break;
+
+			}
+
+		} else {
+
+			*skb_put(info->rx_skb, 1) = buf[i];
+			info->rx_count--;
+
+			if (info->rx_count == 0) {
+
+				int dlen;
+				struct hci_event_hdr *eh;
+				struct hci_acl_hdr *ah;
+				struct hci_sco_hdr *sh;
+
+				switch (info->rx_state) {
+
+				case RECV_WAIT_EVENT_HEADER:
+					eh = (struct hci_event_hdr *)(info->rx_skb->data);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = eh->plen;
+					break;
+
+				case RECV_WAIT_ACL_HEADER:
+					ah = (struct hci_acl_hdr *)(info->rx_skb->data);
+					dlen = __le16_to_cpu(ah->dlen);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = dlen;
+					break;
+
+				case RECV_WAIT_SCO_HEADER:
+					sh = (struct hci_sco_hdr *)(info->rx_skb->data);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = sh->dlen;
+					break;
+
+				case RECV_WAIT_DATA:
+					hci_recv_frame(info->rx_skb);
+					info->rx_skb = NULL;
+					break;
+
+				}
+
+			}
+
+		}
+
+
+	}
+
+	info->hdev->stat.byte_rx += len;
+}
+
+
+static irqreturn_t bluecard_interrupt(int irq, void *dev_inst, struct pt_regs *regs)
+{
+	bluecard_info_t *info = dev_inst;
+	unsigned int iobase;
+	unsigned char reg;
+
+	if (!info || !info->hdev) {
+		BT_ERR("Call of irq %d for unknown device", irq);
+		return IRQ_NONE;
+	}
+
+	if (!test_bit(CARD_READY, &(info->hw_state)))
+		return IRQ_HANDLED;
+
+	iobase = info->link.io.BasePort1;
+
+	spin_lock(&(info->lock));
+
+	/* Disable interrupt */
+	info->ctrl_reg &= ~REG_CONTROL_INTERRUPT;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	reg = inb(iobase + REG_INTERRUPT);
+
+	if ((reg != 0x00) && (reg != 0xff)) {
+
+		if (reg & 0x04) {
+			bluecard_receive(info, 0x00);
+			outb(0x04, iobase + REG_INTERRUPT);
+			outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
+		}
+
+		if (reg & 0x08) {
+			bluecard_receive(info, 0x10);
+			outb(0x08, iobase + REG_INTERRUPT);
+			outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
+		}
+
+		if (reg & 0x01) {
+			set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
+			outb(0x01, iobase + REG_INTERRUPT);
+			bluecard_write_wakeup(info);
+		}
+
+		if (reg & 0x02) {
+			set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
+			outb(0x02, iobase + REG_INTERRUPT);
+			bluecard_write_wakeup(info);
+		}
+
+	}
+
+	/* Enable interrupt */
+	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	spin_unlock(&(info->lock));
+
+	return IRQ_HANDLED;
+}
+
+
+
+/* ======================== Device specific HCI commands ======================== */
+
+
+static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
+{
+	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
+	struct sk_buff *skb;
+
+	/* Ericsson baud rate command */
+	unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
+
+	if (!(skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
+		BT_ERR("Can't allocate mem for new packet");
+		return -1;
+	}
+
+	switch (baud) {
+	case 460800:
+		cmd[4] = 0x00;
+		skb->pkt_type = PKT_BAUD_RATE_460800;
+		break;
+	case 230400:
+		cmd[4] = 0x01;
+		skb->pkt_type = PKT_BAUD_RATE_230400;
+		break;
+	case 115200:
+		cmd[4] = 0x02;
+		skb->pkt_type = PKT_BAUD_RATE_115200;
+		break;
+	case 57600:
+		/* Fall through... */
+	default:
+		cmd[4] = 0x03;
+		skb->pkt_type = PKT_BAUD_RATE_57600;
+		break;
+	}
+
+	memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+
+	skb_queue_tail(&(info->txq), skb);
+
+	bluecard_write_wakeup(info);
+
+	return 0;
+}
+
+
+
+/* ======================== HCI interface ======================== */
+
+
+static int bluecard_hci_flush(struct hci_dev *hdev)
+{
+	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
+
+	/* Drop TX queue */
+	skb_queue_purge(&(info->txq));
+
+	return 0;
+}
+
+
+static int bluecard_hci_open(struct hci_dev *hdev)
+{
+	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
+	unsigned int iobase = info->link.io.BasePort1;
+
+	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
+		bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
+
+	if (test_and_set_bit(HCI_RUNNING, &(hdev->flags)))
+		return 0;
+
+	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
+		/* Enable LED */
+		outb(0x08 | 0x20, iobase + 0x30);
+	}
+
+	return 0;
+}
+
+
+static int bluecard_hci_close(struct hci_dev *hdev)
+{
+	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
+	unsigned int iobase = info->link.io.BasePort1;
+
+	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
+		return 0;
+
+	bluecard_hci_flush(hdev);
+
+	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
+		/* Disable LED */
+		outb(0x00, iobase + 0x30);
+	}
+
+	return 0;
+}
+
+
+static int bluecard_hci_send_frame(struct sk_buff *skb)
+{
+	bluecard_info_t *info;
+	struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
+
+	if (!hdev) {
+		BT_ERR("Frame for unknown HCI device (hdev=NULL)");
+		return -ENODEV;
+	}
+
+	info = (bluecard_info_t *)(hdev->driver_data);
+
+	switch (skb->pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	};
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &(skb->pkt_type), 1);
+	skb_queue_tail(&(info->txq), skb);
+
+	bluecard_write_wakeup(info);
+
+	return 0;
+}
+
+
+static void bluecard_hci_destruct(struct hci_dev *hdev)
+{
+}
+
+
+static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+
+
+/* ======================== Card services HCI interaction ======================== */
+
+
+static int bluecard_open(bluecard_info_t *info)
+{
+	unsigned int iobase = info->link.io.BasePort1;
+	struct hci_dev *hdev;
+	unsigned char id;
+
+	spin_lock_init(&(info->lock));
+
+	init_timer(&(info->timer));
+	info->timer.function = &bluecard_activity_led_timeout;
+	info->timer.data = (u_long)info;
+
+	skb_queue_head_init(&(info->txq));
+
+	info->rx_state = RECV_WAIT_PACKET_TYPE;
+	info->rx_count = 0;
+	info->rx_skb = NULL;
+
+	/* Initialize HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		return -ENOMEM;
+	}
+
+	info->hdev = hdev;
+
+	hdev->type = HCI_PCCARD;
+	hdev->driver_data = info;
+
+	hdev->open     = bluecard_hci_open;
+	hdev->close    = bluecard_hci_close;
+	hdev->flush    = bluecard_hci_flush;
+	hdev->send     = bluecard_hci_send_frame;
+	hdev->destruct = bluecard_hci_destruct;
+	hdev->ioctl    = bluecard_hci_ioctl;
+
+	hdev->owner = THIS_MODULE;
+
+	id = inb(iobase + 0x30);
+
+	if ((id & 0x0f) == 0x02)
+		set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state));
+
+	if (id & 0x10)
+		set_bit(CARD_HAS_POWER_LED, &(info->hw_state));
+
+	if (id & 0x20)
+		set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state));
+
+	/* Reset card */
+	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	/* Turn FPGA off */
+	outb(0x80, iobase + 0x30);
+
+	/* Wait some time */
+	msleep(10);
+
+	/* Turn FPGA on */
+	outb(0x00, iobase + 0x30);
+
+	/* Activate card */
+	info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	/* Enable interrupt */
+	outb(0xff, iobase + REG_INTERRUPT);
+	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	if ((id & 0x0f) == 0x03) {
+		/* Disable RTS */
+		info->ctrl_reg |= REG_CONTROL_RTS;
+		outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+		/* Set baud rate */
+		info->ctrl_reg |= 0x03;
+		outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+		/* Enable RTS */
+		info->ctrl_reg &= ~REG_CONTROL_RTS;
+		outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+		set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
+		set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
+		set_bit(XMIT_SENDING_READY, &(info->tx_state));
+	}
+
+	/* Start the RX buffers */
+	outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
+	outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
+
+	/* Signal that the hardware is ready */
+	set_bit(CARD_READY, &(info->hw_state));
+
+	/* Drop TX queue */
+	skb_queue_purge(&(info->txq));
+
+	/* Control the point at which RTS is enabled */
+	outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL);
+
+	/* Timeout before it is safe to send the first HCI packet */
+	msleep(1250);
+
+	/* Register HCI device */
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		info->hdev = NULL;
+		hci_free_dev(hdev);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static int bluecard_close(bluecard_info_t *info)
+{
+	unsigned int iobase = info->link.io.BasePort1;
+	struct hci_dev *hdev = info->hdev;
+
+	if (!hdev)
+		return -ENODEV;
+
+	bluecard_hci_close(hdev);
+
+	clear_bit(CARD_READY, &(info->hw_state));
+
+	/* Reset card */
+	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	/* Turn FPGA off */
+	outb(0x80, iobase + 0x30);
+
+	if (hci_unregister_dev(hdev) < 0)
+		BT_ERR("Can't unregister HCI device %s", hdev->name);
+
+	hci_free_dev(hdev);
+
+	return 0;
+}
+
+static dev_link_t *bluecard_attach(void)
+{
+	bluecard_info_t *info;
+	client_reg_t client_reg;
+	dev_link_t *link;
+	int ret;
+
+	/* Create new info device */
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return NULL;
+	memset(info, 0, sizeof(*info));
+
+	link = &info->link;
+	link->priv = info;
+
+	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+	link->io.NumPorts1 = 8;
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+
+	link->irq.Handler = bluecard_interrupt;
+	link->irq.Instance = info;
+
+	link->conf.Attributes = CONF_ENABLE_IRQ;
+	link->conf.Vcc = 50;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	/* Register with Card Services */
+	link->next = dev_list;
+	dev_list = link;
+	client_reg.dev_info = &dev_info;
+	client_reg.EventMask =
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.event_handler = &bluecard_event;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != CS_SUCCESS) {
+		cs_error(link->handle, RegisterClient, ret);
+		bluecard_detach(link);
+		return NULL;
+	}
+
+	return link;
+}
+
+
+static void bluecard_detach(dev_link_t *link)
+{
+	bluecard_info_t *info = link->priv;
+	dev_link_t **linkp;
+	int ret;
+
+	/* Locate device structure */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+		if (*linkp == link)
+			break;
+
+	if (*linkp == NULL)
+		return;
+
+	if (link->state & DEV_CONFIG)
+		bluecard_release(link);
+
+	if (link->handle) {
+		ret = pcmcia_deregister_client(link->handle);
+		if (ret != CS_SUCCESS)
+			cs_error(link->handle, DeregisterClient, ret);
+	}
+
+	/* Unlink device structure, free bits */
+	*linkp = link->next;
+
+	kfree(info);
+}
+
+
+static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
+{
+	int i;
+
+	i = pcmcia_get_first_tuple(handle, tuple);
+	if (i != CS_SUCCESS)
+		return CS_NO_MORE_ITEMS;
+
+	i = pcmcia_get_tuple_data(handle, tuple);
+	if (i != CS_SUCCESS)
+		return i;
+
+	return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+static void bluecard_config(dev_link_t *link)
+{
+	client_handle_t handle = link->handle;
+	bluecard_info_t *info = link->priv;
+	tuple_t tuple;
+	u_short buf[256];
+	cisparse_t parse;
+	config_info_t config;
+	int i, n, last_ret, last_fn;
+
+	tuple.TupleData = (cisdata_t *)buf;
+	tuple.TupleOffset = 0;
+	tuple.TupleDataMax = 255;
+	tuple.Attributes = 0;
+
+	/* Get configuration register information */
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	last_ret = first_tuple(handle, &tuple, &parse);
+	if (last_ret != CS_SUCCESS) {
+		last_fn = ParseTuple;
+		goto cs_failed;
+	}
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+	i = pcmcia_get_configuration_info(handle, &config);
+	link->conf.Vcc = config.Vcc;
+
+	link->conf.ConfigIndex = 0x20;
+	link->io.NumPorts1 = 64;
+	link->io.IOAddrLines = 6;
+
+	for (n = 0; n < 0x400; n += 0x40) {
+		link->io.BasePort1 = n ^ 0x300;
+		i = pcmcia_request_io(link->handle, &link->io);
+		if (i == CS_SUCCESS)
+			break;
+	}
+
+	if (i != CS_SUCCESS) {
+		cs_error(link->handle, RequestIO, i);
+		goto failed;
+	}
+
+	i = pcmcia_request_irq(link->handle, &link->irq);
+	if (i != CS_SUCCESS) {
+		cs_error(link->handle, RequestIRQ, i);
+		link->irq.AssignedIRQ = 0;
+	}
+
+	i = pcmcia_request_configuration(link->handle, &link->conf);
+	if (i != CS_SUCCESS) {
+		cs_error(link->handle, RequestConfiguration, i);
+		goto failed;
+	}
+
+	if (bluecard_open(info) != 0)
+		goto failed;
+
+	strcpy(info->node.dev_name, info->hdev->name);
+	link->dev = &info->node;
+	link->state &= ~DEV_CONFIG_PENDING;
+
+	return;
+
+cs_failed:
+	cs_error(link->handle, last_fn, last_ret);
+
+failed:
+	bluecard_release(link);
+}
+
+
+static void bluecard_release(dev_link_t *link)
+{
+	bluecard_info_t *info = link->priv;
+
+	if (link->state & DEV_PRESENT)
+		bluecard_close(info);
+
+	del_timer(&(info->timer));
+
+	link->dev = NULL;
+
+	pcmcia_release_configuration(link->handle);
+	pcmcia_release_io(link->handle, &link->io);
+	pcmcia_release_irq(link->handle, &link->irq);
+
+	link->state &= ~DEV_CONFIG;
+}
+
+
+static int bluecard_event(event_t event, int priority, event_callback_args_t *args)
+{
+	dev_link_t *link = args->client_data;
+	bluecard_info_t *info = link->priv;
+
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG) {
+			bluecard_close(info);
+			bluecard_release(link);
+		}
+		break;
+	case CS_EVENT_CARD_INSERTION:
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		bluecard_config(link);
+		break;
+	case CS_EVENT_PM_SUSPEND:
+		link->state |= DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		if (link->state & DEV_CONFIG)
+			pcmcia_release_configuration(link->handle);
+		break;
+	case CS_EVENT_PM_RESUME:
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		if (DEV_OK(link))
+			pcmcia_request_configuration(link->handle, &link->conf);
+		break;
+	}
+
+	return 0;
+}
+
+static struct pcmcia_driver bluecard_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "bluecard_cs",
+	},
+	.attach		= bluecard_attach,
+	.detach		= bluecard_detach,
+};
+
+static int __init init_bluecard_cs(void)
+{
+	return pcmcia_register_driver(&bluecard_driver);
+}
+
+
+static void __exit exit_bluecard_cs(void)
+{
+	pcmcia_unregister_driver(&bluecard_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+module_init(init_bluecard_cs);
+module_exit(exit_bluecard_cs);