[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device

Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 11 insertions, 14 deletions

diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 86617ee80e5..389a68256fe 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -68,7 +68,7 @@ MODULE_LICENSE("GPL");
 
 
 typedef struct dtl1_info_t {
-	dev_link_t link;
+	struct pcmcia_device *p_dev;
 	dev_node_t node;
 
 	struct hci_dev *hdev;
@@ -153,13 +153,13 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
 	}
 
 	do {
-		register unsigned int iobase = info->link.io.BasePort1;
+		register unsigned int iobase = info->p_dev->io.BasePort1;
 		register struct sk_buff *skb;
 		register int len;
 
 		clear_bit(XMIT_WAKEUP, &(info->tx_state));
 
-		if (!(info->link.state & DEV_PRESENT))
+		if (!(info->p_dev->state & DEV_PRESENT))
 			return;
 
 		if (!(skb = skb_dequeue(&(info->txq))))
@@ -218,7 +218,7 @@ static void dtl1_receive(dtl1_info_t *info)
 		return;
 	}
 
-	iobase = info->link.io.BasePort1;
+	iobase = info->p_dev->io.BasePort1;
 
 	do {
 		info->hdev->stat.byte_rx++;
@@ -305,7 +305,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst, struct pt_regs *regs)
 		return IRQ_NONE;
 	}
 
-	iobase = info->link.io.BasePort1;
+	iobase = info->p_dev->io.BasePort1;
 
 	spin_lock(&(info->lock));
 
@@ -458,7 +458,7 @@ static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd,  unsigned long
 static int dtl1_open(dtl1_info_t *info)
 {
 	unsigned long flags;
-	unsigned int iobase = info->link.io.BasePort1;
+	unsigned int iobase = info->p_dev->io.BasePort1;
 	struct hci_dev *hdev;
 
 	spin_lock_init(&(info->lock));
@@ -504,7 +504,7 @@ static int dtl1_open(dtl1_info_t *info)
 	outb(UART_LCR_WLEN8, iobase + UART_LCR);	/* Reset DLAB */
 	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 
-	info->ri_latch = inb(info->link.io.BasePort1 + UART_MSR) & UART_MSR_RI;
+	info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI;
 
 	/* Turn on interrupts */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
@@ -529,7 +529,7 @@ static int dtl1_open(dtl1_info_t *info)
 static int dtl1_close(dtl1_info_t *info)
 {
 	unsigned long flags;
-	unsigned int iobase = info->link.io.BasePort1;
+	unsigned int iobase = info->p_dev->io.BasePort1;
 	struct hci_dev *hdev = info->hdev;
 
 	if (!hdev)
@@ -558,14 +558,14 @@ static int dtl1_close(dtl1_info_t *info)
 static int dtl1_attach(struct pcmcia_device *p_dev)
 {
 	dtl1_info_t *info;
-	dev_link_t *link;
+	dev_link_t *link = dev_to_instance(p_dev);
 
 	/* Create new info device */
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
-	link = &info->link;
+	info->p_dev = p_dev;
 	link->priv = info;
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
@@ -579,9 +579,6 @@ static int dtl1_attach(struct pcmcia_device *p_dev)
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
-	link->handle = p_dev;
-	p_dev->instance = link;
-
 	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 	dtl1_config(link);
 
@@ -696,7 +693,7 @@ static void dtl1_config(dev_link_t *link)
 		goto failed;
 
 	strcpy(info->node.dev_name, info->hdev->name);
-	link->dev = &info->node;
+	link->dev_node = &info->node;
 	link->state &= ~DEV_CONFIG_PENDING;
 
 	return;