Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...

7 files changed, 1195 insertions, 0 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
new file mode 100644
index 00000000000..bbec35d21fe
--- /dev/null
+++ b/drivers/bus/Kconfig
@@ -0,0 +1,21 @@
+#
+# Bus Devices
+#
+
+menu "Bus devices"
+
+config OMAP_OCP2SCP
+	tristate "OMAP OCP2SCP DRIVER"
+	help
+	  Driver to enable ocp2scp module which transforms ocp interface
+	  protocol to scp protocol. In OMAP4, USB PHY is connected via
+	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+	  OCP2SCP.
+
+config OMAP_INTERCONNECT
+	tristate "OMAP INTERCONNECT DRIVER"
+	depends on ARCH_OMAP2PLUS
+
+	help
+	  Driver to enable OMAP interconnect error handling driver.
+endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
new file mode 100644
index 00000000000..45d997c8545
--- /dev/null
+++ b/drivers/bus/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the bus drivers.
+#
+
+obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
+
+# Interconnect bus driver for OMAP SoCs.
+obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
new file mode 100644
index 00000000000..ff63560b846
--- /dev/null
+++ b/drivers/bus/omap-ocp2scp.c
@@ -0,0 +1,88 @@
+/*
+ * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+static int ocp2scp_remove_devices(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
+{
+	int			ret;
+	struct device_node	*np = pdev->dev.of_node;
+
+	if (np) {
+		ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+			goto err0;
+		}
+	}
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err0:
+	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+	return ret;
+}
+
+static int __devexit omap_ocp2scp_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ocp2scp_id_table[] = {
+	{ .compatible = "ti,omap-ocp2scp" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
+#endif
+
+static struct platform_driver omap_ocp2scp_driver = {
+	.probe		= omap_ocp2scp_probe,
+	.remove		= __devexit_p(omap_ocp2scp_remove),
+	.driver		= {
+		.name	= "omap-ocp2scp",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_ocp2scp_id_table),
+	},
+};
+
+module_platform_driver(omap_ocp2scp_driver);
+
+MODULE_ALIAS("platform: omap-ocp2scp");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP OCP2SCP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
new file mode 100644
index 00000000000..44b2b3e5788
--- /dev/null
+++ b/drivers/bus/omap_l3_noc.c
@@ -0,0 +1,267 @@
+/*
+ * OMAP4XXX L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include "soc.h"
+#include "omap_l3_noc.h"
+
+/*
+ * Interrupt Handler for L3 error detection.
+ *	1) Identify the L3 clockdomain partition to which the error belongs to.
+ *	2) Identify the slave where the error information is logged
+ *	3) Print the logged information.
+ *	4) Add dump stack to provide kernel trace.
+ *
+ * Two Types of errors :
+ *	1) Custom errors in L3 :
+ *		Target like DMM/FW/EMIF generates SRESP=ERR error
+ *	2) Standard L3 error:
+ *		- Unsupported CMD.
+ *			L3 tries to access target while it is idle
+ *		- OCP disconnect.
+ *		- Address hole error:
+ *			If DSS/ISS/FDIF/USBHOSTFS access a target where they
+ *			do not have connectivity, the error is logged in
+ *			their default target which is DMM2.
+ *
+ *	On High Secure devices, firewall errors are possible and those
+ *	can be trapped as well. But the trapping is implemented as part
+ *	secure software and hence need not be implemented here.
+ */
+static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
+{
+
+	struct omap4_l3 *l3 = _l3;
+	int inttype, i, k;
+	int err_src = 0;
+	u32 std_err_main, err_reg, clear, masterid;
+	void __iomem *base, *l3_targ_base;
+	char *target_name, *master_name = "UN IDENTIFIED";
+
+	/* Get the Type of interrupt */
+	inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
+
+	for (i = 0; i < L3_MODULES; i++) {
+		/*
+		 * Read the regerr register of the clock domain
+		 * to determine the source
+		 */
+		base = l3->l3_base[i];
+		err_reg = __raw_readl(base + l3_flagmux[i] +
+					+ L3_FLAGMUX_REGERR0 + (inttype << 3));
+
+		/* Get the corresponding error and analyse */
+		if (err_reg) {
+			/* Identify the source from control status register */
+			err_src = __ffs(err_reg);
+
+			/* Read the stderrlog_main_source from clk domain */
+			l3_targ_base = base + *(l3_targ[i] + err_src);
+			std_err_main =  __raw_readl(l3_targ_base +
+					L3_TARG_STDERRLOG_MAIN);
+			masterid = __raw_readl(l3_targ_base +
+					L3_TARG_STDERRLOG_MSTADDR);
+
+			switch (std_err_main & CUSTOM_ERROR) {
+			case STANDARD_ERROR:
+				target_name =
+					l3_targ_inst_name[i][err_src];
+				WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+					target_name,
+					__raw_readl(l3_targ_base +
+						L3_TARG_STDERRLOG_SLVOFSLSB));
+				/* clear the std error log*/
+				clear = std_err_main | CLEAR_STDERR_LOG;
+				writel(clear, l3_targ_base +
+					L3_TARG_STDERRLOG_MAIN);
+				break;
+
+			case CUSTOM_ERROR:
+				target_name =
+					l3_targ_inst_name[i][err_src];
+				for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+					if (masterid == l3_masters[k].id)
+						master_name =
+							l3_masters[k].name;
+				}
+				WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+					master_name, target_name);
+				/* clear the std error log*/
+				clear = std_err_main | CLEAR_STDERR_LOG;
+				writel(clear, l3_targ_base +
+					L3_TARG_STDERRLOG_MAIN);
+				break;
+
+			default:
+				/* Nothing to be handled here as of now */
+				break;
+			}
+		/* Error found so break the for loop */
+		break;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
+{
+	static struct omap4_l3 *l3;
+	struct resource	*res;
+	int ret;
+
+	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
+	if (!l3)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, l3);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "couldn't find resource 0\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	l3->l3_base[0] = ioremap(res->start, resource_size(res));
+	if (!l3->l3_base[0]) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "couldn't find resource 1\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	l3->l3_base[1] = ioremap(res->start, resource_size(res));
+	if (!l3->l3_base[1]) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!res) {
+		dev_err(&pdev->dev, "couldn't find resource 2\n");
+		ret = -ENODEV;
+		goto err2;
+	}
+
+	l3->l3_base[2] = ioremap(res->start, resource_size(res));
+	if (!l3->l3_base[2]) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	/*
+	 * Setup interrupt Handlers
+	 */
+	l3->debug_irq = platform_get_irq(pdev, 0);
+	ret = request_irq(l3->debug_irq,
+			l3_interrupt_handler,
+			IRQF_DISABLED, "l3-dbg-irq", l3);
+	if (ret) {
+		pr_crit("L3: request_irq failed to register for 0x%x\n",
+						l3->debug_irq);
+		goto err3;
+	}
+
+	l3->app_irq = platform_get_irq(pdev, 1);
+	ret = request_irq(l3->app_irq,
+			l3_interrupt_handler,
+			IRQF_DISABLED, "l3-app-irq", l3);
+	if (ret) {
+		pr_crit("L3: request_irq failed to register for 0x%x\n",
+						l3->app_irq);
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	free_irq(l3->debug_irq, l3);
+err3:
+	iounmap(l3->l3_base[2]);
+err2:
+	iounmap(l3->l3_base[1]);
+err1:
+	iounmap(l3->l3_base[0]);
+err0:
+	kfree(l3);
+	return ret;
+}
+
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
+{
+	struct omap4_l3 *l3 = platform_get_drvdata(pdev);
+
+	free_irq(l3->app_irq, l3);
+	free_irq(l3->debug_irq, l3);
+	iounmap(l3->l3_base[0]);
+	iounmap(l3->l3_base[1]);
+	iounmap(l3->l3_base[2]);
+	kfree(l3);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+	{.compatible = "ti,omap4-l3-noc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
+static struct platform_driver omap4_l3_driver = {
+	.probe		= omap4_l3_probe,
+	.remove		= __devexit_p(omap4_l3_remove),
+	.driver		= {
+		.name		= "omap_l3_noc",
+		.owner		= THIS_MODULE,
+		.of_match_table = l3_noc_match,
+	},
+};
+
+static int __init omap4_l3_init(void)
+{
+	return platform_driver_register(&omap4_l3_driver);
+}
+postcore_initcall_sync(omap4_l3_init);
+
+static void __exit omap4_l3_exit(void)
+{
+	platform_driver_unregister(&omap4_l3_driver);
+}
+module_exit(omap4_l3_exit);
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
new file mode 100644
index 00000000000..a6ce34dc481
--- /dev/null
+++ b/drivers/bus/omap_l3_noc.h
@@ -0,0 +1,176 @@
+/*
+ * OMAP4XXX L3 Interconnect  error handling driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
+
+#define L3_MODULES			3
+#define CLEAR_STDERR_LOG		(1 << 31)
+#define CUSTOM_ERROR			0x2
+#define STANDARD_ERROR			0x0
+#define INBAND_ERROR			0x0
+#define L3_APPLICATION_ERROR		0x0
+#define L3_DEBUG_ERROR			0x1
+
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN		0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB	0x5c
+#define L3_TARG_STDERRLOG_MSTADDR	0x68
+#define L3_FLAGMUX_REGERR0		0xc
+
+#define NUM_OF_L3_MASTERS	(sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+	0x500,
+	0x1000,
+	0X0200
+};
+
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+	0x100, /* DMM1 */
+	0x200, /* DMM2 */
+	0x300, /* ABE */
+	0x400, /* L4CFG */
+	0x600,  /* CLK2 PWR DISC */
+	0x0,	/* Host CLK1 */
+	0x900	/* L4 Wakeup */
+};
+
+static u32 l3_targ_inst_clk2[] = {
+	0x500, /* CORTEX M3 */
+	0x300, /* DSS */
+	0x100, /* GPMC */
+	0x400, /* ISS */
+	0x700, /* IVAHD */
+	0xD00, /* missing in TRM  corresponds to AES1*/
+	0x900, /* L4 PER0*/
+	0x200, /* OCMRAM */
+	0x100, /* missing in TRM corresponds to GPMC sERROR*/
+	0x600, /* SGX */
+	0x800, /* SL2 */
+	0x1600, /* C2C */
+	0x1100,	/* missing in TRM corresponds PWR DISC CLK1*/
+	0xF00, /* missing in TRM corrsponds to SHA1*/
+	0xE00, /* missing in TRM corresponds to AES2*/
+	0xC00, /* L4 PER3 */
+	0xA00, /* L4 PER1*/
+	0xB00, /* L4 PER2*/
+	0x0, /* HOST CLK2 */
+	0x1800, /* CAL */
+	0x1700 /* LLI */
+};
+
+static u32 l3_targ_inst_clk3[] = {
+	0x0100	/* EMUSS */,
+	0x0300, /* DEBUGSS_CT_TBR */
+	0x0 /* HOST CLK3 */
+};
+
+static struct l3_masters_data {
+	u32 id;
+	char name[10];
+} l3_masters[] = {
+	{ 0x0 , "MPU"},
+	{ 0x10, "CS_ADP"},
+	{ 0x14, "xxx"},
+	{ 0x20, "DSP"},
+	{ 0x30, "IVAHD"},
+	{ 0x40, "ISS"},
+	{ 0x44, "DucatiM3"},
+	{ 0x48, "FaceDetect"},
+	{ 0x50, "SDMA_Rd"},
+	{ 0x54, "SDMA_Wr"},
+	{ 0x58, "xxx"},
+	{ 0x5C, "xxx"},
+	{ 0x60, "SGX"},
+	{ 0x70, "DSS"},
+	{ 0x80, "C2C"},
+	{ 0x88, "xxx"},
+	{ 0x8C, "xxx"},
+	{ 0x90, "HSI"},
+	{ 0xA0, "MMC1"},
+	{ 0xA4, "MMC2"},
+	{ 0xA8, "MMC6"},
+	{ 0xB0, "UNIPRO1"},
+	{ 0xC0, "USBHOSTHS"},
+	{ 0xC4, "USBOTGHS"},
+	{ 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][21] = {
+	{
+		"DMM1",
+		"DMM2",
+		"ABE",
+		"L4CFG",
+		"CLK2 PWR DISC",
+		"HOST CLK1",
+		"L4 WAKEUP"
+	},
+	{
+		"CORTEX M3" ,
+		"DSS ",
+		"GPMC ",
+		"ISS ",
+		"IVAHD ",
+		"AES1",
+		"L4 PER0",
+		"OCMRAM ",
+		"GPMC sERROR",
+		"SGX ",
+		"SL2 ",
+		"C2C ",
+		"PWR DISC CLK1",
+		"SHA1",
+		"AES2",
+		"L4 PER3",
+		"L4 PER1",
+		"L4 PER2",
+		"HOST CLK2",
+		"CAL",
+		"LLI"
+	},
+	{
+		"EMUSS",
+		"DEBUG SOURCE",
+		"HOST CLK3"
+	},
+};
+
+static u32 *l3_targ[L3_MODULES] = {
+	l3_targ_inst_clk1,
+	l3_targ_inst_clk2,
+	l3_targ_inst_clk3,
+};
+
+struct omap4_l3 {
+	struct device *dev;
+	struct clk *ick;
+
+	/* memory base */
+	void __iomem *l3_base[L3_MODULES];
+
+	int debug_irq;
+	int app_irq;
+};
+#endif
diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
new file mode 100644
index 00000000000..acc216491b8
--- /dev/null
+++ b/drivers/bus/omap_l3_smx.c
@@ -0,0 +1,297 @@
+/*
+ * OMAP3XXX L3 Interconnect Driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ *	Felipe Balbi <balbi@ti.com>
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include "omap_l3_smx.h"
+
+static inline u64 omap3_l3_readll(void __iomem *base, u16 reg)
+{
+	return __raw_readll(base + reg);
+}
+
+static inline void omap3_l3_writell(void __iomem *base, u16 reg, u64 value)
+{
+	__raw_writell(value, base + reg);
+}
+
+static inline enum omap3_l3_code omap3_l3_decode_error_code(u64 error)
+{
+	return (error & 0x0f000000) >> L3_ERROR_LOG_CODE;
+}
+
+static inline u32 omap3_l3_decode_addr(u64 error_addr)
+{
+	return error_addr & 0xffffffff;
+}
+
+static inline unsigned omap3_l3_decode_cmd(u64 error)
+{
+	return (error & 0x07) >> L3_ERROR_LOG_CMD;
+}
+
+static inline enum omap3_l3_initiator_id omap3_l3_decode_initid(u64 error)
+{
+	return (error & 0xff00) >> L3_ERROR_LOG_INITID;
+}
+
+static inline unsigned omap3_l3_decode_req_info(u64 error)
+{
+	return (error >> 32) & 0xffff;
+}
+
+static char *omap3_l3_code_string(u8 code)
+{
+	switch (code) {
+	case OMAP_L3_CODE_NOERROR:
+		return "No Error";
+	case OMAP_L3_CODE_UNSUP_CMD:
+		return "Unsupported Command";
+	case OMAP_L3_CODE_ADDR_HOLE:
+		return "Address Hole";
+	case OMAP_L3_CODE_PROTECT_VIOLATION:
+		return "Protection Violation";
+	case OMAP_L3_CODE_IN_BAND_ERR:
+		return "In-band Error";
+	case OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT:
+		return "Request Timeout Not Accepted";
+	case OMAP_L3_CODE_REQ_TOUT_NO_RESP:
+		return "Request Timeout, no response";
+	default:
+		return "UNKNOWN error";
+	}
+}
+
+static char *omap3_l3_initiator_string(u8 initid)
+{
+	switch (initid) {
+	case OMAP_L3_LCD:
+		return "LCD";
+	case OMAP_L3_SAD2D:
+		return "SAD2D";
+	case OMAP_L3_IA_MPU_SS_1:
+	case OMAP_L3_IA_MPU_SS_2:
+	case OMAP_L3_IA_MPU_SS_3:
+	case OMAP_L3_IA_MPU_SS_4:
+	case OMAP_L3_IA_MPU_SS_5:
+		return "MPU";
+	case OMAP_L3_IA_IVA_SS_1:
+	case OMAP_L3_IA_IVA_SS_2:
+	case OMAP_L3_IA_IVA_SS_3:
+		return "IVA_SS";
+	case OMAP_L3_IA_IVA_SS_DMA_1:
+	case OMAP_L3_IA_IVA_SS_DMA_2:
+	case OMAP_L3_IA_IVA_SS_DMA_3:
+	case OMAP_L3_IA_IVA_SS_DMA_4:
+	case OMAP_L3_IA_IVA_SS_DMA_5:
+	case OMAP_L3_IA_IVA_SS_DMA_6:
+		return "IVA_SS_DMA";
+	case OMAP_L3_IA_SGX:
+		return "SGX";
+	case OMAP_L3_IA_CAM_1:
+	case OMAP_L3_IA_CAM_2:
+	case OMAP_L3_IA_CAM_3:
+		return "CAM";
+	case OMAP_L3_IA_DAP:
+		return "DAP";
+	case OMAP_L3_SDMA_WR_1:
+	case OMAP_L3_SDMA_WR_2:
+		return "SDMA_WR";
+	case OMAP_L3_SDMA_RD_1:
+	case OMAP_L3_SDMA_RD_2:
+	case OMAP_L3_SDMA_RD_3:
+	case OMAP_L3_SDMA_RD_4:
+		return "SDMA_RD";
+	case OMAP_L3_USBOTG:
+		return "USB_OTG";
+	case OMAP_L3_USBHOST:
+		return "USB_HOST";
+	default:
+		return "UNKNOWN Initiator";
+	}
+}
+
+/*
+ * omap3_l3_block_irq - handles a register block's irq
+ * @l3: struct omap3_l3 *
+ * @base: register block base address
+ * @error: L3_ERROR_LOG register of our block
+ *
+ * Called in hard-irq context. Caller should take care of locking
+ *
+ * OMAP36xx TRM gives, on page 2001, Figure 9-10, the Typical Error
+ * Analysis Sequence, we are following that sequence here, please
+ * refer to that Figure for more information on the subject.
+ */
+static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
+					u64 error, int error_addr)
+{
+	u8 code = omap3_l3_decode_error_code(error);
+	u8 initid = omap3_l3_decode_initid(error);
+	u8 multi = error & L3_ERROR_LOG_MULTI;
+	u32 address = omap3_l3_decode_addr(error_addr);
+
+	pr_err("%s seen by %s %s at address %x\n",
+			omap3_l3_code_string(code),
+			omap3_l3_initiator_string(initid),
+			multi ? "Multiple Errors" : "", address);
+	WARN_ON(1);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
+{
+	struct omap3_l3 *l3 = _l3;
+	u64 status, clear;
+	u64 error;
+	u64 error_addr;
+	u64 err_source = 0;
+	void __iomem *base;
+	int int_type;
+	irqreturn_t ret = IRQ_NONE;
+
+	int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
+	if (!int_type) {
+		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
+		/*
+		 * if we have a timeout error, there's nothing we can
+		 * do besides rebooting the board. So let's BUG on any
+		 * of such errors and handle the others. timeout error
+		 * is severe and not expected to occur.
+		 */
+		BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
+	} else {
+		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
+		/* No timeout error for debug sources */
+	}
+
+	/* identify the error source */
+	err_source = __ffs(status);
+
+	base = l3->rt + omap3_l3_bases[int_type][err_source];
+	error = omap3_l3_readll(base, L3_ERROR_LOG);
+	if (error) {
+		error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
+		ret |= omap3_l3_block_irq(l3, error, error_addr);
+	}
+
+	/* Clear the status register */
+	clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
+		L3_AGENT_STATUS_CLEAR_TA;
+	omap3_l3_writell(base, L3_AGENT_STATUS, clear);
+
+	/* clear the error log register */
+	omap3_l3_writell(base, L3_ERROR_LOG, error);
+
+	return ret;
+}
+
+static int __init omap3_l3_probe(struct platform_device *pdev)
+{
+	struct omap3_l3 *l3;
+	struct resource *res;
+	int ret;
+
+	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
+	if (!l3)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, l3);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "couldn't find resource\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+	l3->rt = ioremap(res->start, resource_size(res));
+	if (!l3->rt) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	l3->debug_irq = platform_get_irq(pdev, 0);
+	ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
+		IRQF_DISABLED | IRQF_TRIGGER_RISING,
+		"l3-debug-irq", l3);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't request debug irq\n");
+		goto err1;
+	}
+
+	l3->app_irq = platform_get_irq(pdev, 1);
+	ret = request_irq(l3->app_irq, omap3_l3_app_irq,
+		IRQF_DISABLED | IRQF_TRIGGER_RISING,
+		"l3-app-irq", l3);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't request app irq\n");
+		goto err2;
+	}
+
+	return 0;
+
+err2:
+	free_irq(l3->debug_irq, l3);
+err1:
+	iounmap(l3->rt);
+err0:
+	kfree(l3);
+	return ret;
+}
+
+static int __exit omap3_l3_remove(struct platform_device *pdev)
+{
+	struct omap3_l3         *l3 = platform_get_drvdata(pdev);
+
+	free_irq(l3->app_irq, l3);
+	free_irq(l3->debug_irq, l3);
+	iounmap(l3->rt);
+	kfree(l3);
+
+	return 0;
+}
+
+static struct platform_driver omap3_l3_driver = {
+	.remove         = __exit_p(omap3_l3_remove),
+	.driver         = {
+	.name   = "omap_l3_smx",
+	},
+};
+
+static int __init omap3_l3_init(void)
+{
+	return platform_driver_probe(&omap3_l3_driver, omap3_l3_probe);
+}
+postcore_initcall_sync(omap3_l3_init);
+
+static void __exit omap3_l3_exit(void)
+{
+	platform_driver_unregister(&omap3_l3_driver);
+}
+module_exit(omap3_l3_exit);
diff --git a/drivers/bus/omap_l3_smx.h b/drivers/bus/omap_l3_smx.h
new file mode 100644
index 00000000000..4f3cebca417
--- /dev/null
+++ b/drivers/bus/omap_l3_smx.h
@@ -0,0 +1,338 @@
+/*
+ * OMAP3XXX L3 Interconnect Driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ *	Felipe Balbi <balbi@ti.com>
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
+
+/* Register definitions. All 64-bit wide */
+#define L3_COMPONENT			0x000
+#define L3_CORE				0x018
+#define L3_AGENT_CONTROL		0x020
+#define L3_AGENT_STATUS			0x028
+#define L3_ERROR_LOG			0x058
+
+#define L3_ERROR_LOG_MULTI		(1 << 31)
+#define L3_ERROR_LOG_SECONDARY		(1 << 30)
+
+#define L3_ERROR_LOG_ADDR		0x060
+
+/* Register definitions for Sideband Interconnect */
+#define L3_SI_CONTROL			0x020
+#define L3_SI_FLAG_STATUS_0		0x510
+
+static const u64 shift = 1;
+
+#define L3_STATUS_0_MPUIA_BRST		(shift << 0)
+#define L3_STATUS_0_MPUIA_RSP		(shift << 1)
+#define L3_STATUS_0_MPUIA_INBAND	(shift << 2)
+#define L3_STATUS_0_IVAIA_BRST		(shift << 6)
+#define L3_STATUS_0_IVAIA_RSP		(shift << 7)
+#define L3_STATUS_0_IVAIA_INBAND	(shift << 8)
+#define L3_STATUS_0_SGXIA_BRST		(shift << 9)
+#define L3_STATUS_0_SGXIA_RSP		(shift << 10)
+#define L3_STATUS_0_SGXIA_MERROR	(shift << 11)
+#define L3_STATUS_0_CAMIA_BRST		(shift << 12)
+#define L3_STATUS_0_CAMIA_RSP		(shift << 13)
+#define L3_STATUS_0_CAMIA_INBAND	(shift << 14)
+#define L3_STATUS_0_DISPIA_BRST		(shift << 15)
+#define L3_STATUS_0_DISPIA_RSP		(shift << 16)
+#define L3_STATUS_0_DMARDIA_BRST	(shift << 18)
+#define L3_STATUS_0_DMARDIA_RSP		(shift << 19)
+#define L3_STATUS_0_DMAWRIA_BRST	(shift << 21)
+#define L3_STATUS_0_DMAWRIA_RSP		(shift << 22)
+#define L3_STATUS_0_USBOTGIA_BRST	(shift << 24)
+#define L3_STATUS_0_USBOTGIA_RSP	(shift << 25)
+#define L3_STATUS_0_USBOTGIA_INBAND	(shift << 26)
+#define L3_STATUS_0_USBHOSTIA_BRST	(shift << 27)
+#define L3_STATUS_0_USBHOSTIA_INBAND	(shift << 28)
+#define L3_STATUS_0_SMSTA_REQ		(shift << 48)
+#define L3_STATUS_0_GPMCTA_REQ		(shift << 49)
+#define L3_STATUS_0_OCMRAMTA_REQ	(shift << 50)
+#define L3_STATUS_0_OCMROMTA_REQ	(shift << 51)
+#define L3_STATUS_0_IVATA_REQ		(shift << 54)
+#define L3_STATUS_0_SGXTA_REQ		(shift << 55)
+#define L3_STATUS_0_SGXTA_SERROR	(shift << 56)
+#define L3_STATUS_0_GPMCTA_SERROR	(shift << 57)
+#define L3_STATUS_0_L4CORETA_REQ	(shift << 58)
+#define L3_STATUS_0_L4PERTA_REQ		(shift << 59)
+#define L3_STATUS_0_L4EMUTA_REQ		(shift << 60)
+#define L3_STATUS_0_MAD2DTA_REQ		(shift << 61)
+
+#define L3_STATUS_0_TIMEOUT_MASK	(L3_STATUS_0_MPUIA_BRST		\
+					| L3_STATUS_0_MPUIA_RSP		\
+					| L3_STATUS_0_IVAIA_BRST	\
+					| L3_STATUS_0_IVAIA_RSP		\
+					| L3_STATUS_0_SGXIA_BRST	\
+					| L3_STATUS_0_SGXIA_RSP		\
+					| L3_STATUS_0_CAMIA_BRST	\
+					| L3_STATUS_0_CAMIA_RSP		\
+					| L3_STATUS_0_DISPIA_BRST	\
+					| L3_STATUS_0_DISPIA_RSP	\
+					| L3_STATUS_0_DMARDIA_BRST	\
+					| L3_STATUS_0_DMARDIA_RSP	\
+					| L3_STATUS_0_DMAWRIA_BRST	\
+					| L3_STATUS_0_DMAWRIA_RSP	\
+					| L3_STATUS_0_USBOTGIA_BRST	\
+					| L3_STATUS_0_USBOTGIA_RSP	\
+					| L3_STATUS_0_USBHOSTIA_BRST	\
+					| L3_STATUS_0_SMSTA_REQ		\
+					| L3_STATUS_0_GPMCTA_REQ	\
+					| L3_STATUS_0_OCMRAMTA_REQ	\
+					| L3_STATUS_0_OCMROMTA_REQ	\
+					| L3_STATUS_0_IVATA_REQ		\
+					| L3_STATUS_0_SGXTA_REQ		\
+					| L3_STATUS_0_L4CORETA_REQ	\
+					| L3_STATUS_0_L4PERTA_REQ	\
+					| L3_STATUS_0_L4EMUTA_REQ	\
+					| L3_STATUS_0_MAD2DTA_REQ)
+
+#define L3_SI_FLAG_STATUS_1		0x530
+
+#define L3_STATUS_1_MPU_DATAIA		(1 << 0)
+#define L3_STATUS_1_DAPIA0		(1 << 3)
+#define L3_STATUS_1_DAPIA1		(1 << 4)
+#define L3_STATUS_1_IVAIA		(1 << 6)
+
+#define L3_PM_ERROR_LOG			0x020
+#define L3_PM_CONTROL			0x028
+#define L3_PM_ERROR_CLEAR_SINGLE	0x030
+#define L3_PM_ERROR_CLEAR_MULTI		0x038
+#define L3_PM_REQ_INFO_PERMISSION(n)	(0x048 + (0x020 * n))
+#define L3_PM_READ_PERMISSION(n)	(0x050 + (0x020 * n))
+#define L3_PM_WRITE_PERMISSION(n)	(0x058 + (0x020 * n))
+#define L3_PM_ADDR_MATCH(n)		(0x060 + (0x020 * n))
+
+/* L3 error log bit fields. Common for IA and TA */
+#define L3_ERROR_LOG_CODE		24
+#define L3_ERROR_LOG_INITID		8
+#define L3_ERROR_LOG_CMD		0
+
+/* L3 agent status bit fields. */
+#define L3_AGENT_STATUS_CLEAR_IA	0x10000000
+#define L3_AGENT_STATUS_CLEAR_TA	0x01000000
+
+#define OMAP34xx_IRQ_L3_APP		10
+#define L3_APPLICATION_ERROR		0x0
+#define L3_DEBUG_ERROR			0x1
+
+enum omap3_l3_initiator_id {
+	/* LCD has 1 ID */
+	OMAP_L3_LCD = 29,
+	/* SAD2D has 1 ID */
+	OMAP_L3_SAD2D = 28,
+	/* MPU has 5 IDs */
+	OMAP_L3_IA_MPU_SS_1 = 27,
+	OMAP_L3_IA_MPU_SS_2 = 26,
+	OMAP_L3_IA_MPU_SS_3 = 25,
+	OMAP_L3_IA_MPU_SS_4 = 24,
+	OMAP_L3_IA_MPU_SS_5 = 23,
+	/* IVA2.2 SS has 3 IDs*/
+	OMAP_L3_IA_IVA_SS_1 = 22,
+	OMAP_L3_IA_IVA_SS_2 = 21,
+	OMAP_L3_IA_IVA_SS_3 = 20,
+	/* IVA 2.2 SS DMA has 6 IDS */
+	OMAP_L3_IA_IVA_SS_DMA_1 = 19,
+	OMAP_L3_IA_IVA_SS_DMA_2 = 18,
+	OMAP_L3_IA_IVA_SS_DMA_3 = 17,
+	OMAP_L3_IA_IVA_SS_DMA_4 = 16,
+	OMAP_L3_IA_IVA_SS_DMA_5 = 15,
+	OMAP_L3_IA_IVA_SS_DMA_6 = 14,
+	/* SGX has 1 ID */
+	OMAP_L3_IA_SGX = 13,
+	/* CAM has 3 ID */
+	OMAP_L3_IA_CAM_1 = 12,
+	OMAP_L3_IA_CAM_2 = 11,
+	OMAP_L3_IA_CAM_3 = 10,
+	/* DAP has 1 ID */
+	OMAP_L3_IA_DAP = 9,
+	/* SDMA WR has 2 IDs */
+	OMAP_L3_SDMA_WR_1 = 8,
+	OMAP_L3_SDMA_WR_2 = 7,
+	/* SDMA RD has 4 IDs */
+	OMAP_L3_SDMA_RD_1 = 6,
+	OMAP_L3_SDMA_RD_2 = 5,
+	OMAP_L3_SDMA_RD_3 = 4,
+	OMAP_L3_SDMA_RD_4 = 3,
+	/* HSUSB OTG has 1 ID */
+	OMAP_L3_USBOTG = 2,
+	/* HSUSB HOST has 1 ID */
+	OMAP_L3_USBHOST = 1,
+};
+
+enum omap3_l3_code {
+	OMAP_L3_CODE_NOERROR = 0,
+	OMAP_L3_CODE_UNSUP_CMD = 1,
+	OMAP_L3_CODE_ADDR_HOLE = 2,
+	OMAP_L3_CODE_PROTECT_VIOLATION = 3,
+	OMAP_L3_CODE_IN_BAND_ERR = 4,
+	/* codes 5 and 6 are reserved */
+	OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT = 7,
+	OMAP_L3_CODE_REQ_TOUT_NO_RESP = 8,
+	/* codes 9 - 15 are also reserved */
+};
+
+struct omap3_l3 {
+	struct device *dev;
+	struct clk *ick;
+
+	/* memory base*/
+	void __iomem *rt;
+
+	int debug_irq;
+	int app_irq;
+
+	/* true when and inband functional error occurs */
+	unsigned inband:1;
+};
+
+/* offsets for l3 agents in order with the Flag status register */
+static unsigned int omap3_l3_app_bases[] = {
+	/* MPU IA */
+	0x1400,
+	0x1400,
+	0x1400,
+	/* RESERVED */
+	0,
+	0,
+	0,
+	/* IVA 2.2 IA */
+	0x1800,
+	0x1800,
+	0x1800,
+	/* SGX IA */
+	0x1c00,
+	0x1c00,
+	/* RESERVED */
+	0,
+	/* CAMERA IA */
+	0x5800,
+	0x5800,
+	0x5800,
+	/* DISPLAY IA */
+	0x5400,
+	0x5400,
+	/* RESERVED */
+	0,
+	/*SDMA RD IA */
+	0x4c00,
+	0x4c00,
+	/* RESERVED */
+	0,
+	/* SDMA WR IA */
+	0x5000,
+	0x5000,
+	/* RESERVED */
+	0,
+	/* USB OTG IA */
+	0x4400,
+	0x4400,
+	0x4400,
+	/* USB HOST IA */
+	0x4000,
+	0x4000,
+	/* RESERVED */
+	0,
+	0,
+	0,
+	0,
+	/* SAD2D IA */
+	0x3000,
+	0x3000,
+	0x3000,
+	/* RESERVED */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	/* SMA TA */
+	0x2000,
+	/* GPMC TA */
+	0x2400,
+	/* OCM RAM TA */
+	0x2800,
+	/* OCM ROM TA */
+	0x2C00,
+	/* L4 CORE TA */
+	0x6800,
+	/* L4 PER TA */
+	0x6c00,
+	/* IVA 2.2 TA */
+	0x6000,
+	/* SGX TA */
+	0x6400,
+	/* L4 EMU TA */
+	0x7000,
+	/* GPMC TA */
+	0x2400,
+	/* L4 CORE TA */
+	0x6800,
+	/* L4 PER TA */
+	0x6c00,
+	/* L4 EMU TA */
+	0x7000,
+	/* MAD2D TA */
+	0x3400,
+	/* RESERVED */
+	0,
+	0,
+};
+
+static unsigned int omap3_l3_debug_bases[] = {
+	/* MPU DATA IA */
+	0x1400,
+	/* RESERVED */
+	0,
+	0,
+	/* DAP IA */
+	0x5c00,
+	0x5c00,
+	/* RESERVED */
+	0,
+	/* IVA 2.2 IA */
+	0x1800,
+	/* REST RESERVED */
+};
+
+static u32 *omap3_l3_bases[] = {
+	omap3_l3_app_bases,
+	omap3_l3_debug_bases,
+};
+
+/*
+ * REVISIT define __raw_readll/__raw_writell here, but move them to
+ * <asm/io.h> at some point
+ */
+#define __raw_writell(v, a)	(__chk_io_ptr(a), \
+				*(volatile u64 __force *)(a) = (v))
+#define __raw_readll(a)		(__chk_io_ptr(a), \
+				*(volatile u64 __force *)(a))
+
+#endif