Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 839 insertions, 0 deletions

diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h
new file mode 100644
index 00000000000..2f2225f13c6
--- /dev/null
+++ b/drivers/cdrom/sbpcd.h
@@ -0,0 +1,839 @@
+/*
+ * sbpcd.h   Specify interface address and interface type here.
+ */
+
+/*
+ * Attention! This file contains user-serviceable parts!
+ * I recommend to make use of it...
+ * If you feel helpless, look into Documentation/cdrom/sbpcd
+ * (good idea anyway, at least before mailing me).
+ *
+ * The definitions for the first controller can get overridden by
+ * the kernel command line ("lilo boot option").
+ * Examples:
+ *                                 sbpcd=0x300,LaserMate
+ *                             or
+ *                                 sbpcd=0x230,SoundBlaster
+ *                             or
+ *                                 sbpcd=0x338,SoundScape
+ *                             or
+ *                                 sbpcd=0x2C0,Teac16bit
+ *
+ * If sbpcd gets used as a module, you can load it with
+ *     insmod sbpcd.o sbpcd=0x300,0
+ * or
+ *     insmod sbpcd.o sbpcd=0x230,1
+ * or
+ *     insmod sbpcd.o sbpcd=0x338,2
+ * or
+ *     insmod sbpcd.o sbpcd=0x2C0,3
+ * respective to override the configured address and type.
+ */
+
+/*
+ * define your CDROM port base address as CDROM_PORT
+ * and specify the type of your interface card as SBPRO.
+ *
+ * address:
+ * ========
+ * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
+ * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
+ * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
+ * specify the REAL address here, not the configuration port address. Look
+ * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
+ * sbpcd auto-probe, if you are not firm with the address.
+ * There are some soundcards on the market with 0x0630, 0x0650, ...; their
+ * type is not obvious (both types are possible).
+ *
+ * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
+ *          if your soundcard has its CDROM port above 0x300, specify
+ *          that address and try SBPRO 0 first.
+ *          if your SoundScape configuration port is at 0x330, specify
+ *          0x338 and SBPRO 2.
+ *
+ * interface type:
+ * ===============
+ * set SBPRO to 1 for "true" SoundBlaster card
+ * set SBPRO to 0 for "compatible" soundcards and
+ *                for "poor" (no sound) interface cards.
+ * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
+ * set SBPRO to 3 for Teac 16bit interface cards
+ *
+ * Almost all "compatible" sound boards need to set SBPRO to 0.
+ * If SBPRO is set wrong, the drives will get found - but any
+ * data access will give errors (audio access will work).
+ * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
+ * interface cards need SBPRO 1.
+ *
+ * sound base:
+ * ===========
+ * The SOUND_BASE definition tells if we should try to turn the CD sound
+ * channels on. It will only be of use regarding soundcards with a SbPro
+ * compatible mixer.
+ *
+ * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
+ *          #define SOUND_BASE 0     leaves the soundcard untouched
+ */
+#define CDROM_PORT 0x340 /* <-----------<< port address                      */
+#define SBPRO      0     /* <-----------<< interface type                    */
+#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */
+#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0   */
+
+/*
+ * some more or less user dependent definitions - service them!
+ */
+
+/* Set this to 0 once you have configured your interface definitions right. */
+#define DISTRIBUTION 1
+
+/*
+ * Time to wait after giving a message.
+ * This gets important if you enable non-standard DBG_xxx flags.
+ * You will see what happens if you omit the pause or make it
+ * too short. Be warned!
+ */
+#define KLOGD_PAUSE 1
+
+/* tray control: eject tray if no disk is in */
+#if DISTRIBUTION
+#define JUKEBOX 0
+#else
+#define JUKEBOX 1
+#endif /* DISTRIBUTION */
+
+/* tray control: eject tray after last use */
+#if DISTRIBUTION
+#define EJECT 0
+#else
+#define EJECT 1
+#endif /* DISTRIBUTION */
+
+/* max. number of audio frames to read with one     */
+/* request (allocates n* 2352 bytes kernel memory!) */
+/* may be freely adjusted, f.e. 75 (= 1 sec.), at   */
+/* runtime by use of the CDROMAUDIOBUFSIZ ioctl.    */
+#define READ_AUDIO 0
+
+/* Optimizations for the Teac CD-55A drive read performance.
+ * SBP_TEAC_SPEED can be changed here, or one can set the 
+ * variable "teac" when loading as a module.
+ * Valid settings are:
+ *   0 - very slow - the recommended "DISTRIBUTION 1" setup.
+ *   1 - 2x performance with little overhead. No busy waiting.
+ *   2 - 4x performance with 5ms overhead per read. Busy wait.
+ *
+ * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
+ * other than 0 may cause problems. If you run into them, first
+ * change SBP_TEAC_SPEED back to 0 and see if your drive responds
+ * normally. If yes, you are "allowed" to report your case - to help
+ * me with the driver, not to solve your hassle. Donīt mail if you
+ * simply are stuck into your own "tuning" experiments, you know?
+ */
+#define SBP_TEAC_SPEED 1
+
+/*==========================================================================*/
+/*==========================================================================*/
+/*
+ * nothing to change below here if you are not fully aware what you're doing
+ */
+#ifndef _LINUX_SBPCD_H
+
+#define _LINUX_SBPCD_H
+/*==========================================================================*/
+/*==========================================================================*/
+/*
+ * driver's own read_ahead, data mode
+ */
+#define SBP_BUFFER_FRAMES 8 
+
+#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
+#undef  FUTURE
+#undef SAFE_MIXED
+
+#define TEST_UPC 0
+#define SPEA_TEST 0
+#define TEST_STI 0
+#define OLD_BUSY 0
+#undef PATH_CHECK
+#ifndef SOUND_BASE
+#define SOUND_BASE 0
+#endif
+#if DISTRIBUTION
+#undef SBP_TEAC_SPEED
+#define SBP_TEAC_SPEED 0
+#endif
+/*==========================================================================*/
+/*
+ * DDI interface definitions
+ * "invented" by Fred N. van Kempen..
+ */
+#define DDIOCSDBG	0x9000
+
+/*==========================================================================*/
+/*
+ * "private" IOCTL functions
+ */
+#define CDROMAUDIOBUFSIZ	0x5382 /* set the audio buffer size */
+
+/*==========================================================================*/
+/*
+ * Debug output levels
+ */
+#define DBG_INF	1	/* necessary information */
+#define DBG_BSZ	2	/* BLOCK_SIZE trace */
+#define DBG_REA	3	/* READ status trace */
+#define DBG_CHK	4	/* MEDIA CHECK trace */
+#define DBG_TIM	5	/* datarate timer test */
+#define DBG_INI	6	/* initialization trace */
+#define DBG_TOC	7	/* tell TocEntry values */
+#define DBG_IOC	8	/* ioctl trace */
+#define DBG_STA	9	/* ResponseStatus() trace */
+#define DBG_ERR	10	/* cc_ReadError() trace */
+#define DBG_CMD	11	/* cmd_out() trace */
+#define DBG_WRN	12	/* give explanation before auto-probing */
+#define DBG_MUL	13	/* multi session code test */
+#define DBG_IDX	14	/* test code for drive_id !=0 */
+#define DBG_IOX	15	/* some special information */
+#define DBG_DID	16	/* drive ID test */
+#define DBG_RES	17	/* drive reset info */
+#define DBG_SPI	18	/* SpinUp test */
+#define DBG_IOS	19	/* ioctl trace: subchannel functions */
+#define DBG_IO2	20	/* ioctl trace: general */
+#define DBG_UPC	21	/* show UPC information */
+#define DBG_XA1	22	/* XA mode debugging */
+#define DBG_LCK	23	/* door (un)lock info */
+#define DBG_SQ1	24	/* dump SubQ frame */
+#define DBG_AUD	25	/* READ AUDIO debugging */
+#define DBG_SEQ	26	/* Sequoia interface configuration trace */
+#define DBG_LCS	27	/* Longshine LCS-7260 debugging trace */
+#define DBG_CD2	28	/* MKE/Funai CD200 debugging trace */
+#define DBG_TEA	29	/* TEAC CD-55A debugging trace */
+#define DBG_ECS	30	/* ECS-AT (Vertos 100) debugging trace */
+#define DBG_000	31	/* unnecessary information */
+
+/*==========================================================================*/
+/*==========================================================================*/
+
+/*
+ * bits of flags_cmd_out:
+ */
+#define f_respo3		0x100
+#define f_putcmd		0x80
+#define f_respo2		0x40
+#define f_lopsta		0x20
+#define f_getsta		0x10
+#define f_ResponseStatus	0x08
+#define f_obey_p_check		0x04
+#define f_bit1			0x02
+#define f_wait_if_busy		0x01
+
+/*
+ * diskstate_flags:
+ */
+#define x80_bit			0x80
+#define upc_bit			0x40
+#define volume_bit		0x20
+#define toc_bit			0x10
+#define multisession_bit	0x08
+#define cd_size_bit		0x04
+#define subq_bit		0x02
+#define frame_size_bit		0x01
+
+/*
+ * disk states (bits of diskstate_flags):
+ */
+#define upc_valid		(current_drive->diskstate_flags&upc_bit)
+#define volume_valid		(current_drive->diskstate_flags&volume_bit)
+#define toc_valid		(current_drive->diskstate_flags&toc_bit)
+#define cd_size_valid		(current_drive->diskstate_flags&cd_size_bit)
+#define subq_valid		(current_drive->diskstate_flags&subq_bit)
+#define frame_size_valid	(current_drive->diskstate_flags&frame_size_bit)
+
+/*
+ * the status_bits variable
+ */
+#define p_success	0x100
+#define p_door_closed	0x80
+#define p_caddy_in	0x40
+#define p_spinning	0x20
+#define p_check		0x10
+#define p_busy_new	0x08
+#define p_door_locked	0x04
+#define p_disk_ok	0x01
+
+/*
+ * LCS-7260 special status result bits:
+ */
+#define p_lcs_door_locked	0x02
+#define p_lcs_door_closed	0x01 /* probably disk_in */
+
+/*
+ * CR-52x special status result bits:
+ */
+#define p_caddin_old	0x40
+#define p_success_old	0x08
+#define p_busy_old	0x04
+#define p_bit_1		0x02	/* hopefully unused now */
+
+/*
+ * "generation specific" defs of the status result bits:
+ */
+#define p0_door_closed	0x80
+#define p0_caddy_in	0x40
+#define p0_spinning	0x20
+#define p0_check	0x10
+#define p0_success	0x08 /* unused */
+#define p0_busy		0x04
+#define p0_bit_1	0x02 /* unused */
+#define p0_disk_ok	0x01
+
+#define pL_disk_in	0x40
+#define pL_spinning	0x20
+#define pL_check	0x10
+#define pL_success	0x08 /* unused ?? */
+#define pL_busy		0x04
+#define pL_door_locked	0x02
+#define pL_door_closed	0x01
+
+#define pV_door_closed	0x40
+#define pV_spinning	0x20
+#define pV_check	0x10
+#define pV_success	0x08
+#define pV_busy		0x04
+#define pV_door_locked	0x02
+#define pV_disk_ok	0x01
+
+#define p1_door_closed	0x80
+#define p1_disk_in	0x40
+#define p1_spinning	0x20
+#define p1_check	0x10
+#define p1_busy		0x08
+#define p1_door_locked	0x04
+#define p1_bit_1	0x02 /* unused */
+#define p1_disk_ok	0x01
+
+#define p2_disk_ok	0x80
+#define p2_door_locked	0x40
+#define p2_spinning	0x20
+#define p2_busy2	0x10
+#define p2_busy1	0x08
+#define p2_door_closed	0x04
+#define p2_disk_in	0x02
+#define p2_check	0x01
+
+/*
+ * used drive states:
+ */
+#define st_door_closed	(current_drive->status_bits&p_door_closed)
+#define st_caddy_in	(current_drive->status_bits&p_caddy_in)
+#define st_spinning	(current_drive->status_bits&p_spinning)
+#define st_check	(current_drive->status_bits&p_check)
+#define st_busy		(current_drive->status_bits&p_busy_new)
+#define st_door_locked	(current_drive->status_bits&p_door_locked)
+#define st_diskok	(current_drive->status_bits&p_disk_ok)
+
+/*
+ * bits of the CDi_status register:
+ */
+#define s_not_result_ready	0x04 /* 0: "result ready" */
+#define s_not_data_ready	0x02 /* 0: "data ready"   */
+#define s_attention		0x01 /* 1: "attention required" */
+/*
+ * usable as:
+ */
+#define DRV_ATTN	((inb(CDi_status)&s_attention)!=0)
+#define DATA_READY	((inb(CDi_status)&s_not_data_ready)==0)
+#define RESULT_READY	((inb(CDi_status)&s_not_result_ready)==0)
+
+/*
+ * drive families and types (firmware versions):
+ */
+#define drv_fam0	0x0100		/* CR-52x family */
+#define drv_199		(drv_fam0+0x01)	/* <200 */
+#define drv_200		(drv_fam0+0x02)	/* <201 */
+#define drv_201		(drv_fam0+0x03)	/* <210 */
+#define drv_210		(drv_fam0+0x04)	/* <211 */
+#define drv_211		(drv_fam0+0x05)	/* <300 */
+#define drv_300		(drv_fam0+0x06)	/* >=300 */
+
+#define drv_fam1	0x0200		/* CR-56x family */
+#define drv_099		(drv_fam1+0x01)	/* <100 */
+#define drv_100		(drv_fam1+0x02)	/* >=100, only 1.02 and 5.00 known */
+
+#define drv_fam2	0x0400		/* CD200 family */
+
+#define drv_famT	0x0800		/* TEAC CD-55A */
+
+#define drv_famL	0x1000		/* Longshine family */
+#define drv_260		(drv_famL+0x01)	/* LCS-7260 */
+#define drv_e1		(drv_famL+0x01)	/* LCS-7260, firmware "A E1" */
+#define drv_f4		(drv_famL+0x02)	/* LCS-7260, firmware "A4F4" */
+
+#define drv_famV	0x2000		/* ECS-AT (vertos-100) family */
+#define drv_at		(drv_famV+0x01)	/* ECS-AT, firmware "1.00" */
+
+#define fam0_drive	(current_drive->drv_type&drv_fam0)
+#define famL_drive	(current_drive->drv_type&drv_famL)
+#define famV_drive	(current_drive->drv_type&drv_famV)
+#define fam1_drive	(current_drive->drv_type&drv_fam1)
+#define fam2_drive	(current_drive->drv_type&drv_fam2)
+#define famT_drive	(current_drive->drv_type&drv_famT)
+#define fam0L_drive	(current_drive->drv_type&(drv_fam0|drv_famL))
+#define fam0V_drive	(current_drive->drv_type&(drv_fam0|drv_famV))
+#define famLV_drive	(current_drive->drv_type&(drv_famL|drv_famV))
+#define fam0LV_drive	(current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
+#define fam1L_drive	(current_drive->drv_type&(drv_fam1|drv_famL))
+#define fam1V_drive	(current_drive->drv_type&(drv_fam1|drv_famV))
+#define fam1LV_drive	(current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
+#define fam01_drive	(current_drive->drv_type&(drv_fam0|drv_fam1))
+#define fam12_drive	(current_drive->drv_type&(drv_fam1|drv_fam2))
+#define fam2T_drive	(current_drive->drv_type&(drv_fam2|drv_famT))
+
+/*
+ * audio states:
+ */
+#define audio_completed	3 /* Forgot this one! --AJK */
+#define audio_playing	2
+#define audio_pausing	1
+
+/*
+ * drv_pattern, drv_options:
+ */
+#define speed_auto	0x80
+#define speed_300	0x40
+#define speed_150	0x20
+#define audio_mono	0x04
+
+/*
+ * values of cmd_type (0 else):
+ */
+#define READ_M1	0x01	/* "data mode 1": 2048 bytes per frame */
+#define READ_M2	0x02	/* "data mode 2": 12+2048+280 bytes per frame */
+#define READ_SC	0x04	/* "subchannel info": 96 bytes per frame */
+#define READ_AU	0x08	/* "audio frame": 2352 bytes per frame */
+
+/*
+ * sense_byte:
+ *
+ *          values: 00
+ *                  01
+ *                  81
+ *                  82 "raw audio" mode
+ *                  xx from infobuf[0] after 85 00 00 00 00 00 00
+ */
+
+/* audio status (bin) */
+#define aud_00 0x00 /* Audio status byte not supported or not valid */
+#define audx11 0x0b /* Audio play operation in progress             */
+#define audx12 0x0c /* Audio play operation paused                  */
+#define audx13 0x0d /* Audio play operation successfully completed  */
+#define audx14 0x0e /* Audio play operation stopped due to error    */
+#define audx15 0x0f /* No current audio status to return            */
+/* audio status (bcd) */
+#define aud_11 0x11 /* Audio play operation in progress             */
+#define aud_12 0x12 /* Audio play operation paused                  */
+#define aud_13 0x13 /* Audio play operation successfully completed  */
+#define aud_14 0x14 /* Audio play operation stopped due to error    */
+#define aud_15 0x15 /* No current audio status to return            */
+
+/*
+ * highest allowed drive number (MINOR+1)
+ */
+#define NR_SBPCD	4
+
+/*
+ * we try to never disable interrupts - seems to work
+ */
+#define SBPCD_DIS_IRQ	0
+
+/*
+ * "write byte to port"
+ */
+#define OUT(x,y)	outb(y,x)
+
+/*==========================================================================*/
+
+#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
+#define MIXER_data SOUND_BASE+5 /* sound card's data register */
+#define MIXER_CD_Volume	0x28	/* internal SB Pro register address */
+
+/*==========================================================================*/
+
+#define MAX_TRACKS	99
+
+#define ERR_DISKCHANGE 615
+
+/*==========================================================================*/
+/*
+ * To make conversions easier (machine dependent!)
+ */
+typedef union _msf
+{
+	u_int n;
+	u_char c[4];
+} MSF;
+
+typedef union _blk
+{
+	u_int n;
+	u_char c[4];
+} BLK;
+
+/*==========================================================================*/
+
+/*============================================================================
+==============================================================================
+
+COMMAND SET of "old" drives like CR-521, CR-522
+               (the CR-562 family is different):
+
+No.	Command			       Code
+--------------------------------------------
+
+Drive Commands:
+ 1	Seek				01	
+ 2	Read Data			02
+ 3	Read XA-Data			03
+ 4	Read Header			04
+ 5	Spin Up				05
+ 6	Spin Down			06
+ 7	Diagnostic			07
+ 8	Read UPC			08
+ 9	Read ISRC			09
+10	Play Audio			0A
+11	Play Audio MSF			0B
+12	Play Audio Track/Index		0C
+
+Status Commands:
+13	Read Status			81	
+14	Read Error			82
+15	Read Drive Version		83
+16	Mode Select			84
+17	Mode Sense			85
+18	Set XA Parameter		86
+19	Read XA Parameter		87
+20	Read Capacity			88
+21	Read SUB_Q			89
+22	Read Disc Code			8A
+23	Read Disc Information		8B
+24	Read TOC			8C
+25	Pause/Resume			8D
+26	Read Packet			8E
+27	Read Path Check			00
+ 
+ 
+all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
+
+mnemo     7-byte command        #bytes response (r0...rn)
+________ ____________________  ____ 
+
+Read Status:
+status:  81.                    (1)  one-byte command, gives the main
+                                                          status byte
+Read Error:
+check1:  82 00 00 00 00 00 00.  (6)  r1: audio status
+
+Read Packet:
+check2:  8e xx 00 00 00 00 00. (xx)  gets xx bytes response, relating
+                                        to commands 01 04 05 07 08 09
+
+Play Audio:
+play:    0a ll-bb-aa nn-nn-nn.  (0)  play audio, ll-bb-aa: starting block (lba),
+                                                 nn-nn-nn: #blocks
+Play Audio MSF:
+         0b mm-ss-ff mm-ss-ff   (0)  play audio from/to
+
+Play Audio Track/Index:
+         0c ...
+
+Pause/Resume:
+pause:   8d pr 00 00 00 00 00.  (0)  pause (pr=00) 
+                                     resume (pr=80) audio playing
+
+Mode Select:
+         84 00 nn-nn ??.?? 00   (0)  nn-nn: 2048 or 2340
+                                     possibly defines transfer size
+
+set_vol: 84 83 00 00 sw le 00.  (0)  sw(itch): lrxxxxxx (off=1)
+                                     le(vel): min=0, max=FF, else half
+				     (firmware 2.11)
+
+Mode Sense:
+get_vol: 85 03 00 00 00 00 00.  (2)  tell current audio volume setting
+
+Read Disc Information:
+tocdesc: 8b 00 00 00 00 00 00.  (6)  read the toc descriptor ("msf-bin"-format)
+
+Read TOC:
+tocent:  8c fl nn 00 00 00 00.  (8)  read toc entry #nn
+                                       (fl=0:"lba"-, =2:"msf-bin"-format)
+
+Read Capacity:
+capacit: 88 00 00 00 00 00 00.  (5)  "read CD-ROM capacity"
+
+
+Read Path Check:
+ping:    00 00 00 00 00 00 00.  (2)  r0=AA, r1=55
+                                     ("ping" if the drive is connected)
+
+Read Drive Version:
+ident:   83 00 00 00 00 00 00. (12)  gives "MATSHITAn.nn" 
+                                     (n.nn = 2.01, 2.11., 3.00, ...)
+
+Seek:
+seek:    01 00 ll-bb-aa 00 00.  (0)  
+seek:    01 02 mm-ss-ff 00 00.  (0)  
+
+Read Data:
+read:    02 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2048 bytes,
+                                     starting at block xx-xx-xx  
+                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
+
+Read XA-Data:
+read:    03 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2340 bytes, 
+                                     starting at block xx-xx-xx
+                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
+
+Read SUB_Q:
+         89 fl 00 00 00 00 00. (13)  r0: audio status, r4-r7: lba/msf, 
+                                       fl=0: "lba", fl=2: "msf"
+
+Read Disc Code:
+         8a 00 00 00 00 00 00. (14)  possibly extended "check condition"-info
+
+Read Header:
+         04 00 ll-bb-aa 00 00.  (0)   4 bytes response with "check2"
+         04 02 mm-ss-ff 00 00.  (0)   4 bytes response with "check2"
+
+Spin Up:
+         05 00 ll-bb-aa 00 00.  (0)  possibly implies a "seek"
+
+Spin Down:
+         06 ...
+
+Diagnostic:
+         07 00 ll-bb-aa 00 00.  (2)   2 bytes response with "check2"
+         07 02 mm-ss-ff 00 00.  (2)   2 bytes response with "check2"
+
+Read UPC:
+         08 00 ll-bb-aa 00 00. (16)  
+         08 02 mm-ss-ff 00 00. (16)  
+
+Read ISRC:
+         09 00 ll-bb-aa 00 00. (15)  15 bytes response with "check2"
+         09 02 mm-ss-ff 00 00. (15)  15 bytes response with "check2"
+
+Set XA Parameter:
+         86 ...
+
+Read XA Parameter:
+         87 ...
+
+==============================================================================
+============================================================================*/
+
+/*
+ * commands
+ *
+ * CR-52x:      CMD0_
+ * CR-56x:      CMD1_
+ * CD200:       CMD2_
+ * LCS-7260:    CMDL_
+ * TEAC CD-55A: CMDT_
+ * ECS-AT:      CMDV_
+ */
+#define CMD1_RESET	0x0a
+#define CMD2_RESET	0x01
+#define CMDT_RESET	0xc0
+
+#define CMD1_LOCK_CTL	0x0c
+#define CMD2_LOCK_CTL	0x1e
+#define CMDT_LOCK_CTL	CMD2_LOCK_CTL
+#define CMDL_LOCK_CTL	0x0e
+#define CMDV_LOCK_CTL	CMDL_LOCK_CTL
+
+#define CMD1_TRAY_CTL	0x07
+#define CMD2_TRAY_CTL	0x1b
+#define CMDT_TRAY_CTL	CMD2_TRAY_CTL
+#define CMDL_TRAY_CTL	0x0d
+#define CMDV_TRAY_CTL	CMDL_TRAY_CTL
+
+#define CMD1_MULTISESS	0x8d
+#define CMDL_MULTISESS	0x8c
+#define CMDV_MULTISESS	CMDL_MULTISESS
+
+#define CMD1_SUBCHANINF	0x11
+#define CMD2_SUBCHANINF	0x??
+
+#define CMD1_ABORT	0x08
+#define CMD2_ABORT	0x08
+#define CMDT_ABORT	0x08
+
+#define CMD2_x02	0x02
+
+#define CMD2_SETSPEED	0xda
+
+#define CMD0_PATH_CHECK	0x00
+#define CMD1_PATH_CHECK	0x???
+#define CMD2_PATH_CHECK	0x???
+#define CMDT_PATH_CHECK	0x???
+#define CMDL_PATH_CHECK	CMD0_PATH_CHECK
+#define CMDV_PATH_CHECK	CMD0_PATH_CHECK
+
+#define CMD0_SEEK	0x01
+#define CMD1_SEEK	CMD0_SEEK
+#define CMD2_SEEK	0x2b
+#define CMDT_SEEK	CMD2_SEEK
+#define CMDL_SEEK	CMD0_SEEK
+#define CMDV_SEEK	CMD0_SEEK
+
+#define CMD0_READ	0x02
+#define CMD1_READ	0x10
+#define CMD2_READ	0x28
+#define CMDT_READ	CMD2_READ
+#define CMDL_READ	CMD0_READ
+#define CMDV_READ	CMD0_READ
+
+#define CMD0_READ_XA	0x03
+#define CMD2_READ_XA	0xd4
+#define CMD2_READ_XA2	0xd5
+#define CMDL_READ_XA	CMD0_READ_XA /* really ?? */
+#define CMDV_READ_XA	CMD0_READ_XA
+
+#define CMD0_READ_HEAD	0x04
+
+#define CMD0_SPINUP	0x05
+#define CMD1_SPINUP	0x02
+#define CMD2_SPINUP	CMD2_TRAY_CTL
+#define CMDL_SPINUP	CMD0_SPINUP
+#define CMDV_SPINUP	CMD0_SPINUP
+
+#define CMD0_SPINDOWN	0x06 /* really??? */
+#define CMD1_SPINDOWN	0x06
+#define CMD2_SPINDOWN	CMD2_TRAY_CTL
+#define CMDL_SPINDOWN	0x0d
+#define CMDV_SPINDOWN	CMD0_SPINDOWN
+
+#define CMD0_DIAG	0x07
+
+#define CMD0_READ_UPC	0x08
+#define CMD1_READ_UPC	0x88
+#define CMD2_READ_UPC	0x???
+#define CMDL_READ_UPC	CMD0_READ_UPC
+#define CMDV_READ_UPC	0x8f
+
+#define CMD0_READ_ISRC	0x09
+
+#define CMD0_PLAY	0x0a
+#define CMD1_PLAY	0x???
+#define CMD2_PLAY	0x???
+#define CMDL_PLAY	CMD0_PLAY
+#define CMDV_PLAY	CMD0_PLAY
+
+#define CMD0_PLAY_MSF	0x0b
+#define CMD1_PLAY_MSF	0x0e
+#define CMD2_PLAY_MSF	0x47
+#define CMDT_PLAY_MSF	CMD2_PLAY_MSF
+#define CMDL_PLAY_MSF	0x???
+
+#define CMD0_PLAY_TI	0x0c
+#define CMD1_PLAY_TI	0x0f
+
+#define CMD0_STATUS	0x81
+#define CMD1_STATUS	0x05
+#define CMD2_STATUS	0x00
+#define CMDT_STATUS	CMD2_STATUS
+#define CMDL_STATUS	CMD0_STATUS
+#define CMDV_STATUS	CMD0_STATUS
+#define CMD2_SEEK_LEADIN 0x00
+
+#define CMD0_READ_ERR	0x82
+#define CMD1_READ_ERR	CMD0_READ_ERR
+#define CMD2_READ_ERR	0x03
+#define CMDT_READ_ERR	CMD2_READ_ERR /* get audio status */
+#define CMDL_READ_ERR	CMD0_READ_ERR
+#define CMDV_READ_ERR	CMD0_READ_ERR
+
+#define CMD0_READ_VER	0x83
+#define CMD1_READ_VER	CMD0_READ_VER
+#define CMD2_READ_VER	0x12
+#define CMDT_READ_VER	CMD2_READ_VER /* really ?? */
+#define CMDL_READ_VER	CMD0_READ_VER
+#define CMDV_READ_VER	CMD0_READ_VER
+
+#define CMD0_SETMODE	0x84
+#define CMD1_SETMODE	0x09
+#define CMD2_SETMODE	0x55
+#define CMDT_SETMODE	CMD2_SETMODE
+#define CMDL_SETMODE	CMD0_SETMODE
+
+#define CMD0_GETMODE	0x85
+#define CMD1_GETMODE	0x84
+#define CMD2_GETMODE	0x5a
+#define CMDT_GETMODE	CMD2_GETMODE
+#define CMDL_GETMODE	CMD0_GETMODE
+
+#define CMD0_SET_XA	0x86
+
+#define CMD0_GET_XA	0x87
+
+#define CMD0_CAPACITY	0x88
+#define CMD1_CAPACITY	0x85
+#define CMD2_CAPACITY	0x25
+#define CMDL_CAPACITY	CMD0_CAPACITY /* missing in some firmware versions */
+
+#define CMD0_READSUBQ	0x89
+#define CMD1_READSUBQ	0x87
+#define CMD2_READSUBQ	0x42
+#define CMDT_READSUBQ	CMD2_READSUBQ
+#define CMDL_READSUBQ	CMD0_READSUBQ
+#define CMDV_READSUBQ	CMD0_READSUBQ
+
+#define CMD0_DISKCODE	0x8a
+
+#define CMD0_DISKINFO	0x8b
+#define CMD1_DISKINFO	CMD0_DISKINFO
+#define CMD2_DISKINFO	0x43
+#define CMDT_DISKINFO	CMD2_DISKINFO
+#define CMDL_DISKINFO	CMD0_DISKINFO
+#define CMDV_DISKINFO	CMD0_DISKINFO
+
+#define CMD0_READTOC	0x8c
+#define CMD1_READTOC	CMD0_READTOC
+#define CMD2_READTOC	0x???
+#define CMDL_READTOC	CMD0_READTOC
+#define CMDV_READTOC	CMD0_READTOC
+
+#define CMD0_PAU_RES	0x8d
+#define CMD1_PAU_RES	0x0d
+#define CMD2_PAU_RES	0x4b
+#define CMDT_PAUSE	CMD2_PAU_RES
+#define CMDL_PAU_RES	CMD0_PAU_RES
+#define CMDV_PAUSE	CMD0_PAU_RES
+
+#define CMD0_PACKET	0x8e
+#define CMD1_PACKET	CMD0_PACKET
+#define CMD2_PACKET	0x???
+#define CMDL_PACKET	CMD0_PACKET
+#define CMDV_PACKET	0x???
+
+/*==========================================================================*/
+/*==========================================================================*/
+#endif /* _LINUX_SBPCD_H */
+/*==========================================================================*/
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file. 
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 8
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -8
+ * c-argdecl-indent: 8
+ * c-label-offset: -8
+ * c-continued-statement-offset: 8
+ * c-continued-brace-offset: 0
+ * End:
+ */