tty: move obsolete and broken tty drivers to drivers/staging/tty/

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/tty/ directory where they will be removed after 2.6.41
if no one steps up to claim them.
	epca
	epca
	ip2
	istallion
	riscom8
	serial167
	specialix
	stallion

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 210 deletions

diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c
deleted file mode 100644
index e7af647800b..00000000000
--- a/drivers/char/ip2/i2cmd.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Definition table for In-line and Bypass commands. Applicable
-*                only when the standard loadware is active. (This is included
-*                source code, not a separate compilation module.)
-*
-*******************************************************************************/
-
-//------------------------------------------------------------------------------
-//
-// Revision History:
-//
-// 10 October 1991   MAG First Draft
-//  7 November 1991  MAG Reflects additional commands.
-// 24 February 1992  MAG Additional commands for 1.4.x loadware
-// 11 March 1992     MAG Additional commands
-// 30 March 1992     MAG Additional command: CMD_DSS_NOW
-// 18 May 1992       MAG Discovered commands 39 & 40 must be at the end of a
-//                       packet: affects implementation.
-//------------------------------------------------------------------------------
-
-//************
-//* Includes *
-//************
-
-#include "i2cmd.h"   /* To get some bit-defines */
-
-//------------------------------------------------------------------------------
-// Here is the table of global arrays which represent each type of command
-// supported in the IntelliPort standard loadware. See also i2cmd.h
-// for a more complete explanation of what is going on.
-//------------------------------------------------------------------------------
-
-// Here are the various globals: note that the names are not used except through
-// the macros defined in i2cmd.h. Also note that although they are character
-// arrays here (for extendability) they are cast to structure pointers in the
-// i2cmd.h macros. See i2cmd.h for flags definitions.
-
-//                     Length Flags Command
-static UCHAR ct02[] = { 1, BTH,     0x02                     }; // DTR UP
-static UCHAR ct03[] = { 1, BTH,     0x03                     }; // DTR DN
-static UCHAR ct04[] = { 1, BTH,     0x04                     }; // RTS UP
-static UCHAR ct05[] = { 1, BTH,     0x05                     }; // RTS DN
-static UCHAR ct06[] = { 1, BYP,     0x06                     }; // START FL
-static UCHAR ct07[] = { 2, BTH,     0x07,0                   }; // BAUD
-static UCHAR ct08[] = { 2, BTH,     0x08,0                   }; // BITS
-static UCHAR ct09[] = { 2, BTH,     0x09,0                   }; // STOP
-static UCHAR ct10[] = { 2, BTH,     0x0A,0                   }; // PARITY
-static UCHAR ct11[] = { 2, BTH,     0x0B,0                   }; // XON
-static UCHAR ct12[] = { 2, BTH,     0x0C,0                   }; // XOFF
-static UCHAR ct13[] = { 1, BTH,     0x0D                     }; // STOP FL
-static UCHAR ct14[] = { 1, BYP|VIP, 0x0E                     }; // ACK HOTK
-//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0                   }; // IRQ SET
-static UCHAR ct16[] = { 2, INL,     0x10,0                   }; // IXONOPTS
-static UCHAR ct17[] = { 2, INL,     0x11,0                   }; // OXONOPTS
-static UCHAR ct18[] = { 1, INL,     0x12                     }; // CTSENAB
-static UCHAR ct19[] = { 1, BTH,     0x13                     }; // CTSDSAB
-static UCHAR ct20[] = { 1, INL,     0x14                     }; // DCDENAB
-static UCHAR ct21[] = { 1, BTH,     0x15                     }; // DCDDSAB
-static UCHAR ct22[] = { 1, BTH,     0x16                     }; // DSRENAB
-static UCHAR ct23[] = { 1, BTH,     0x17                     }; // DSRDSAB
-static UCHAR ct24[] = { 1, BTH,     0x18                     }; // RIENAB
-static UCHAR ct25[] = { 1, BTH,     0x19                     }; // RIDSAB
-static UCHAR ct26[] = { 2, BTH,     0x1A,0                   }; // BRKENAB
-static UCHAR ct27[] = { 1, BTH,     0x1B                     }; // BRKDSAB
-//static UCHAR ct28[]={ 2, BTH,     0x1C,0                   }; // MAXBLOKSIZE
-//static UCHAR ct29[]={ 2, 0,       0x1D,0                   }; // reserved
-static UCHAR ct30[] = { 1, INL,     0x1E                     }; // CTSFLOWENAB
-static UCHAR ct31[] = { 1, INL,     0x1F                     }; // CTSFLOWDSAB
-static UCHAR ct32[] = { 1, INL,     0x20                     }; // RTSFLOWENAB
-static UCHAR ct33[] = { 1, INL,     0x21                     }; // RTSFLOWDSAB
-static UCHAR ct34[] = { 2, BTH,     0x22,0                   }; // ISTRIPMODE
-static UCHAR ct35[] = { 2, BTH|END, 0x23,0                   }; // SENDBREAK
-static UCHAR ct36[] = { 2, BTH,     0x24,0                   }; // SETERRMODE
-//static UCHAR ct36a[]={ 3, INL,    0x24,0,0                 }; // SET_REPLACE
-
-// The following is listed for completeness, but should never be sent directly
-// by user-level code. It is sent only by library routines in response to data
-// movement.
-//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0             }; // FLOW PACKET
-
-// Back to normal
-//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ
-//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0                 }; // OPOSTON
-//static UCHAR ct40[]={ 1, BTH|END, 0x28                     }; // OPOSTOFF
-static UCHAR ct41[] = { 1, BYP,     0x29                     }; // RESUME
-//static UCHAR ct42[]={ 2, BTH,     0x2A,0                   }; // TXBAUD
-//static UCHAR ct43[]={ 2, BTH,     0x2B,0                   }; // RXBAUD
-//static UCHAR ct44[]={ 2, BTH,     0x2C,0                   }; // MS PING
-//static UCHAR ct45[]={ 1, BTH,     0x2D                     }; // HOTENAB
-//static UCHAR ct46[]={ 1, BTH,     0x2E                     }; // HOTDSAB
-//static UCHAR ct47[]={ 7, BTH,     0x2F,0,0,0,0,0,0         }; // UNIX FLAGS
-//static UCHAR ct48[]={ 1, BTH,     0x30                     }; // DSRFLOWENAB
-//static UCHAR ct49[]={ 1, BTH,     0x31                     }; // DSRFLOWDSAB
-//static UCHAR ct50[]={ 1, BTH,     0x32                     }; // DTRFLOWENAB
-//static UCHAR ct51[]={ 1, BTH,     0x33                     }; // DTRFLOWDSAB
-//static UCHAR ct52[]={ 1, BTH,     0x34                     }; // BAUDTABRESET
-//static UCHAR ct53[] = { 3, BTH,     0x35,0,0                 }; // BAUDREMAP
-static UCHAR ct54[] = { 3, BTH,     0x36,0,0                 }; // CUSTOMBAUD1
-static UCHAR ct55[] = { 3, BTH,     0x37,0,0                 }; // CUSTOMBAUD2
-static UCHAR ct56[] = { 2, BTH|END, 0x38,0                   }; // PAUSE
-static UCHAR ct57[] = { 1, BYP,     0x39                     }; // SUSPEND
-static UCHAR ct58[] = { 1, BYP,     0x3A                     }; // UNSUSPEND
-static UCHAR ct59[] = { 2, BTH,     0x3B,0                   }; // PARITYCHK
-static UCHAR ct60[] = { 1, INL|VIP, 0x3C                     }; // BOOKMARKREQ
-//static UCHAR ct61[]={ 2, BTH,     0x3D,0                   }; // INTERNALLOOP
-//static UCHAR ct62[]={ 2, BTH,     0x3E,0                   }; // HOTKTIMEOUT
-static UCHAR ct63[] = { 2, INL,     0x3F,0                   }; // SETTXON
-static UCHAR ct64[] = { 2, INL,     0x40,0                   }; // SETTXOFF
-//static UCHAR ct65[]={ 2, BTH,     0x41,0                   }; // SETAUTORTS
-//static UCHAR ct66[]={ 2, BTH,     0x42,0                   }; // SETHIGHWAT
-//static UCHAR ct67[]={ 2, BYP,     0x43,0                   }; // STARTSELFL
-//static UCHAR ct68[]={ 2, INL,     0x44,0                   }; // ENDSELFL
-//static UCHAR ct69[]={ 1, BYP,     0x45                     }; // HWFLOW_OFF
-//static UCHAR ct70[]={ 1, BTH,     0x46                     }; // ODSRFL_ENAB
-//static UCHAR ct71[]={ 1, BTH,     0x47                     }; // ODSRFL_DSAB
-//static UCHAR ct72[]={ 1, BTH,     0x48                     }; // ODCDFL_ENAB
-//static UCHAR ct73[]={ 1, BTH,     0x49                     }; // ODCDFL_DSAB
-//static UCHAR ct74[]={ 2, BTH,     0x4A,0                   }; // LOADLEVEL
-//static UCHAR ct75[]={ 2, BTH,     0x4B,0                   }; // STATDATA
-//static UCHAR ct76[]={ 1, BYP,     0x4C                     }; // BREAK_ON
-//static UCHAR ct77[]={ 1, BYP,     0x4D                     }; // BREAK_OFF
-//static UCHAR ct78[]={ 1, BYP,     0x4E                     }; // GETFC
-static UCHAR ct79[] = { 2, BYP,     0x4F,0                   }; // XMIT_NOW
-//static UCHAR ct80[]={ 4, BTH,     0x50,0,0,0               }; // DIVISOR_LATCH
-//static UCHAR ct81[]={ 1, BYP,     0x51                     }; // GET_STATUS
-//static UCHAR ct82[]={ 1, BYP,     0x52                     }; // GET_TXCNT
-//static UCHAR ct83[]={ 1, BYP,     0x53                     }; // GET_RXCNT
-//static UCHAR ct84[]={ 1, BYP,     0x54                     }; // GET_BOXIDS
-//static UCHAR ct85[]={10, BYP,     0x55,0,0,0,0,0,0,0,0,0   }; // ENAB_MULT
-//static UCHAR ct86[]={ 2, BTH,     0x56,0                   }; // RCV_ENABLE
-static UCHAR ct87[] = { 1, BYP,     0x57                     }; // HW_TEST
-//static UCHAR ct88[]={ 3, BTH,     0x58,0,0                 }; // RCV_THRESHOLD
-//static UCHAR ct90[]={ 3, BYP,     0x5A,0,0                 }; // Set SILO
-//static UCHAR ct91[]={ 2, BYP,     0x5B,0                   }; // timed break
-
-// Some composite commands as well
-//static UCHAR cc01[]={ 2, BTH,     0x02,0x04                }; // DTR & RTS UP
-//static UCHAR cc02[]={ 2, BTH,     0x03,0x05                }; // DTR & RTS DN
-
-//********
-//* Code *
-//********
-
-//******************************************************************************
-// Function:   i2cmdUnixFlags(iflag, cflag, lflag)
-// Parameters: Unix tty flags
-//
-// Returns:    Pointer to command structure
-//
-// Description:
-//
-// This routine sets the parameters of command 47 and returns a pointer to the
-// appropriate structure.
-//******************************************************************************
-#if 0
-cmdSyntaxPtr
-i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag)
-{
-	cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47;
-
-	pCM->cmd[1] = (unsigned char)  iflag;
-	pCM->cmd[2] = (unsigned char) (iflag >> 8);
-	pCM->cmd[3] = (unsigned char)  cflag;
-	pCM->cmd[4] = (unsigned char) (cflag >> 8);
-	pCM->cmd[5] = (unsigned char)  lflag;
-	pCM->cmd[6] = (unsigned char) (lflag >> 8);
-	return pCM;
-}
-#endif  /*  0  */
-
-//******************************************************************************
-// Function:   i2cmdBaudDef(which, rate)
-// Parameters: ?
-//
-// Returns:    Pointer to command structure
-//
-// Description:
-//
-// This routine sets the parameters of commands 54 or 55 (according to the
-// argument which), and returns a pointer to the appropriate structure.
-//******************************************************************************
-static cmdSyntaxPtr
-i2cmdBaudDef(int which, unsigned short rate)
-{
-	cmdSyntaxPtr pCM;
-
-	switch(which)
-	{
-	case 1:
-		pCM = (cmdSyntaxPtr) ct54;
-		break;
-	default:
-	case 2:
-		pCM = (cmdSyntaxPtr) ct55;
-		break;
-	}
-	pCM->cmd[1] = (unsigned char) rate;
-	pCM->cmd[2] = (unsigned char) (rate >> 8);
-	return pCM;
-}
-