Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...

1 files changed, 27 insertions, 33 deletions

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index be181005760..bfc10f89d95 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2191,6 +2191,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
+static int mgslpc_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 /* Service an IOCTL request
  *
  * Arguments:
@@ -2206,11 +2232,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 			unsigned int cmd, unsigned long arg)
 {
 	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
 	void __user *argp = (void __user *)arg;
-	unsigned long flags;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2220,7 +2242,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -2250,34 +2272,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 		return wait_events(info, argp);
 	case TIOCMIWAIT:
 		return modem_input_wait(info,(int)arg);
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		PUT_USER(error,cnow.cts, &p_cuser->cts);
-		if (error) return error;
-		PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-		if (error) return error;
-		PUT_USER(error,cnow.rng, &p_cuser->rng);
-		if (error) return error;
-		PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-		if (error) return error;
-		PUT_USER(error,cnow.rx, &p_cuser->rx);
-		if (error) return error;
-		PUT_USER(error,cnow.tx, &p_cuser->tx);
-		if (error) return error;
-		PUT_USER(error,cnow.frame, &p_cuser->frame);
-		if (error) return error;
-		PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-		if (error) return error;
-		PUT_USER(error,cnow.parity, &p_cuser->parity);
-		if (error) return error;
-		PUT_USER(error,cnow.brk, &p_cuser->brk);
-		if (error) return error;
-		PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (error) return error;
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}