[MIPS] qtronix: remove driver.

Another leftover of removing support for the ITE8172.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 605 deletions

diff --git a/drivers/char/qtronix.c b/drivers/char/qtronix.c
deleted file mode 100644
index 5c9477741a3..00000000000
--- a/drivers/char/qtronix.c
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Qtronix 990P infrared keyboard driver.
- *
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *
- *  The bottom portion of this driver was take from 
- *  pc_keyb.c  Please see that file for copyrights.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/* 
- * NOTE:  
- *
- *	This driver has only been tested with the Consumer IR
- *	port of the ITE 8172 system controller.
- *
- *	You do not need this driver if you are using the ps/2 or
- *	USB adapter that the keyboard ships with.  You only need 
- *	this driver if your board has a IR port and the keyboard
- *	data is being sent directly to the IR.  In that case,
- *	you also need some low-level IR support. See it8172_cir.c.
- *	
- */
-
-#ifdef CONFIG_QTRONIX_KEYBOARD
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#include <asm/it8172/it8172_cir.h>
-
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/mm.h>
-#include <linux/signal.h>
-#include <linux/init.h>
-#include <linux/kbd_ll.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/kbd_kern.h>
-#include <linux/smp_lock.h>
-#include <asm/io.h>
-#include <linux/pc_keyb.h>
-
-#include <asm/keyboard.h>
-#include <linux/bitops.h>
-#include <asm/uaccess.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#define leading1 0
-#define leading2 0xF
-
-#define KBD_CIR_PORT 0
-#define AUX_RECONNECT 170 /* scancode when ps2 device is plugged (back) in */
-
-static int data_index;
-struct cir_port *cir;
-static unsigned char kbdbytes[5];
-static unsigned char cir_data[32]; /* we only need 16 chars */
-
-static void kbd_int_handler(int irq, void *dev_id);
-static int handle_data(unsigned char *p_data);
-static inline void handle_mouse_event(unsigned char scancode);
-static inline void handle_keyboard_event(unsigned char scancode, int down);
-static int __init psaux_init(void);
-
-static struct aux_queue *queue;	/* Mouse data buffer. */
-static int aux_count = 0;
-
-/*
- * Keys accessed through the 'Fn' key
- * The Fn key does not produce a key-up sequence. So, the first
- * time the user presses it, it will be key-down event. The key
- * stays down until the user presses it again.
- */
-#define NUM_FN_KEYS 56
-static unsigned char fn_keys[NUM_FN_KEYS] = {
-	0,0,0,0,0,0,0,0,        /* 0 7   */
-	8,9,10,93,0,0,0,0,      /* 8 15  */
-	0,0,0,0,0,0,0,5,        /* 16 23 */
-	6,7,91,0,0,0,0,0,       /* 24 31 */
-	0,0,0,0,0,2,3,4,        /* 32 39 */
-	92,0,0,0,0,0,0,0,       /* 40 47 */
-	0,0,0,0,11,0,94,95        /* 48 55 */
-
-};
-
-void __init init_qtronix_990P_kbd(void)
-{
-	int retval;
-
-	cir = (struct cir_port *)kmalloc(sizeof(struct cir_port), GFP_KERNEL);
-	if (!cir) {
-		printk("Unable to initialize Qtronix keyboard\n");
-		return;
-	}
-
-	/* 
-	 * revisit
-	 * this should be programmable, somehow by the, by the user.
-	 */
-	cir->port = KBD_CIR_PORT;
-	cir->baud_rate = 0x1d;
-	cir->rdwos = 0;
-	cir->rxdcr = 0x3;
-	cir->hcfs = 0;
-	cir->fifo_tl = 0;
-	cir->cfq = 0x1d;
-	cir_port_init(cir);
-
-	retval = request_irq(IT8172_CIR0_IRQ, kbd_int_handler, 
-			(unsigned long )(IRQF_DISABLED|IRQF_SHARED),
-			(const char *)"Qtronix IR Keyboard", (void *)cir);
-
-	if (retval) {
-		printk("unable to allocate cir %d irq %d\n", 
-				cir->port, IT8172_CIR0_IRQ);
-	}
-#ifdef CONFIG_PSMOUSE
-	psaux_init();
-#endif
-}
-
-static inline unsigned char BitReverse(unsigned short key)
-{
-	unsigned char rkey = 0;
-	rkey |= (key & 0x1) << 7;
-	rkey |= (key & 0x2) << 5;
-	rkey |= (key & 0x4) << 3;
-	rkey |= (key & 0x8) << 1;
-	rkey |= (key & 0x10) >> 1;
-	rkey |= (key & 0x20) >> 3;
-	rkey |= (key & 0x40) >> 5;
-	rkey |= (key & 0x80) >> 7;
-	return rkey;
-
-}
-
-
-static inline u_int8_t UpperByte(u_int8_t data)
-{
-	return (data >> 4);
-}
-
-
-static inline u_int8_t LowerByte(u_int8_t data)
-{
-	return (data & 0xF);
-}
-
-
-int CheckSumOk(u_int8_t byte1, u_int8_t byte2, 
-		u_int8_t byte3, u_int8_t byte4, u_int8_t byte5)
-{
-	u_int8_t CheckSum;
-
-	CheckSum = (byte1 & 0x0F) + byte2 + byte3 + byte4 + byte5;
-	if ( LowerByte(UpperByte(CheckSum) + LowerByte(CheckSum)) != UpperByte(byte1) )
-		return 0;
-	else
-		return 1;
-}
-
-
-static void kbd_int_handler(int irq, void *dev_id)
-{
-	struct cir_port *cir;
-	int j;
-	unsigned char int_status;
-
-	cir = (struct cir_port *)dev_id;
-	int_status = get_int_status(cir);
-	if (int_status & 0x4) {
-		clear_fifo(cir);
-		return;
-	}
-
-	while (cir_get_rx_count(cir)) {
-
-		cir_data[data_index] = cir_read_data(cir);
-
-		if (data_index == 0) {/* expecting first byte */
-			if (cir_data[data_index] != leading1) {
-				//printk("!leading byte %x\n", cir_data[data_index]);
-				set_rx_active(cir);
-				clear_fifo(cir);
-				continue;
-			}
-		}
-		if (data_index == 1) {
-			if ((cir_data[data_index] & 0xf) != leading2) {
-				set_rx_active(cir);
-				data_index = 0; /* start over */
-				clear_fifo(cir);
-				continue;
-			}
-		}
-
-		if ( (cir_data[data_index] == 0xff)) { /* last byte */
-			//printk("data_index %d\n", data_index);
-			set_rx_active(cir);
-#if 0
-			for (j=0; j<=data_index; j++) {
-				printk("rx_data %d:  %x\n", j, cir_data[j]);
-			}
-#endif
-			data_index = 0;
-			handle_data(cir_data);
-			return;
-		}
-		else if (data_index>16) {
-			set_rx_active(cir);
-#if 0
-			printk("warning: data_index %d\n", data_index);
-			for (j=0; j<=data_index; j++) {
-				printk("rx_data %d:  %x\n", j, cir_data[j]);
-			}
-#endif
-			data_index = 0;
-			clear_fifo(cir);
-			return;
-		}
-		data_index++;
-	}
-}
-
-
-#define NUM_KBD_BYTES 5
-static int handle_data(unsigned char *p_data)
-{
-	u_int32_t bit_bucket;
-	u_int32_t i, j;
-	u_int32_t got_bits, next_byte;
-	int down = 0;
-
-	/* Reorganize the bit stream */
-	for (i=0; i<16; i++)
-		p_data[i] = BitReverse(~p_data[i]);
-
-	/* 
-	 * We've already previously checked that p_data[0]
-	 * is equal to leading1 and that (p_data[1] & 0xf)
-	 * is equal to leading2. These twelve bits are the
-	 * leader code.  We can now throw them away (the 12
-	 * bits) and continue parsing the stream.
-	 */
-	bit_bucket = p_data[1] << 12;
-	got_bits = 4;
-	next_byte = 2;
-
-	/* 
-	 * Process four bits at a time
-	 */
-	for (i=0; i<NUM_KBD_BYTES; i++) {
-
-		kbdbytes[i]=0;
-
-		for (j=0; j<8; j++) /* 8 bits per byte */
-		{
-			if (got_bits < 4) {
-				bit_bucket |= (p_data[next_byte++] << (8 - got_bits));
-				got_bits += 8;
-			}
-
-			if ((bit_bucket & 0xF000) == 0x8000) { 
-				/* Convert 1000b to 1 */
-				kbdbytes[i] = 0x80 | (kbdbytes[i] >> 1);
-				got_bits -= 4;
-				bit_bucket = bit_bucket << 4;
-			}
-			else if ((bit_bucket & 0xC000) == 0x8000) {
-				/* Convert 10b to 0 */
-				kbdbytes[i] =  kbdbytes[i] >> 1;
-				got_bits -= 2;
-				bit_bucket = bit_bucket << 2;
-			}
-			else {
-				/* bad serial stream */
-				return 1;
-			}
-
-			if (next_byte > 16) {
-				//printk("error: too many bytes\n");
-				return 1;
-			}
-		}
-	}
-
-
-	if (!CheckSumOk(kbdbytes[0], kbdbytes[1], 
-				kbdbytes[2], kbdbytes[3], kbdbytes[4])) {
-		//printk("checksum failed\n");
-		return 1;
-	}
-
-	if (kbdbytes[1] & 0x08) {
-		//printk("m: %x %x %x\n", kbdbytes[1], kbdbytes[2], kbdbytes[3]);
-		handle_mouse_event(kbdbytes[1]);
-		handle_mouse_event(kbdbytes[2]);
-		handle_mouse_event(kbdbytes[3]);
-	}
-	else {
-		if (kbdbytes[2] == 0) down = 1;
-#if 0
-		if (down)
-			printk("down %d\n", kbdbytes[3]);
-		else
-			printk("up %d\n", kbdbytes[3]);
-#endif
-		handle_keyboard_event(kbdbytes[3], down);
-	}
-	return 0;
-}
-
-
-DEFINE_SPINLOCK(kbd_controller_lock);
-static unsigned char handle_kbd_event(void);
-
-
-int kbd_setkeycode(unsigned int scancode, unsigned int keycode)
-{
-	printk("kbd_setkeycode scancode %x keycode %x\n", scancode, keycode);
-	return 0;
-}
-
-int kbd_getkeycode(unsigned int scancode)
-{
-	return scancode;
-}
-
-
-int kbd_translate(unsigned char scancode, unsigned char *keycode,
-		    char raw_mode)
-{
-	static int prev_scancode = 0;
-
-	if (scancode == 0x00 || scancode == 0xff) {
-		prev_scancode = 0;
-		return 0;
-	}
-
-	/* todo */
-	if (!prev_scancode && scancode == 160) { /* Fn key down */
-		//printk("Fn key down\n");
-		prev_scancode = 160;
-		return 0;
-	}
-	else if (prev_scancode && scancode == 160) { /* Fn key up */
-		//printk("Fn key up\n");
-		prev_scancode = 0;
-		return 0;
-	}
-
-	/* todo */
-	if (prev_scancode == 160) {
-		if (scancode <= NUM_FN_KEYS) {
-			*keycode = fn_keys[scancode];
-			//printk("fn keycode %d\n", *keycode);
-		}
-		else
-			return 0;
-	} 
-	else if (scancode <= 127) {
-		*keycode = scancode;
-	}
-	else
-		return 0;
-
-
- 	return 1;
-}
-
-char kbd_unexpected_up(unsigned char keycode)
-{
-	//printk("kbd_unexpected_up\n");
-	return 0;
-}
-
-static unsigned char kbd_exists = 1;
-
-static inline void handle_keyboard_event(unsigned char scancode, int down)
-{
-	kbd_exists = 1;
-	handle_scancode(scancode, down);
-	tasklet_schedule(&keyboard_tasklet);
-}	
-
-
-void kbd_leds(unsigned char leds)
-{
-}
-
-/* dummy */
-void kbd_init_hw(void)
-{
-}
-
-
-
-static inline void handle_mouse_event(unsigned char scancode)
-{
-	if(scancode == AUX_RECONNECT){
-		queue->head = queue->tail = 0;  /* Flush input queue */
-	//	__aux_write_ack(AUX_ENABLE_DEV);  /* ping the mouse :) */
-		return;
-	}
-
-	if (aux_count) {
-		int head = queue->head;
-
-		queue->buf[head] = scancode;
-		head = (head + 1) & (AUX_BUF_SIZE-1);
-		if (head != queue->tail) {
-			queue->head = head;
-			kill_fasync(&queue->fasync, SIGIO, POLL_IN);
-			wake_up_interruptible(&queue->proc_list);
-		}
-	}
-}
-
-static unsigned char get_from_queue(void)
-{
-	unsigned char result;
-	unsigned long flags;
-
-	spin_lock_irqsave(&kbd_controller_lock, flags);
-	result = queue->buf[queue->tail];
-	queue->tail = (queue->tail + 1) & (AUX_BUF_SIZE-1);
-	spin_unlock_irqrestore(&kbd_controller_lock, flags);
-	return result;
-}
-
-
-static inline int queue_empty(void)
-{
-	return queue->head == queue->tail;
-}
-
-static int fasync_aux(int fd, struct file *filp, int on)
-{
-	int retval;
-
-	//printk("fasync_aux\n");
-	retval = fasync_helper(fd, filp, on, &queue->fasync);
-	if (retval < 0)
-		return retval;
-	return 0;
-}
-
-
-/*
- * Random magic cookie for the aux device
- */
-#define AUX_DEV ((void *)queue)
-
-static int release_aux(struct inode * inode, struct file * file)
-{
-	fasync_aux(-1, file, 0);
-	aux_count--;
-	return 0;
-}
-
-static int open_aux(struct inode * inode, struct file * file)
-{
-	if (aux_count++) {
-		return 0;
-	}
-	queue->head = queue->tail = 0;		/* Flush input queue */
-	return 0;
-}
-
-/*
- * Put bytes from input queue to buffer.
- */
-
-static ssize_t read_aux(struct file * file, char * buffer,
-			size_t count, loff_t *ppos)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t i = count;
-	unsigned char c;
-
-	if (queue_empty()) {
-		if (file->f_flags & O_NONBLOCK)
-			return -EAGAIN;
-		add_wait_queue(&queue->proc_list, &wait);
-repeat:
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (queue_empty() && !signal_pending(current)) {
-			schedule();
-			goto repeat;
-		}
-		current->state = TASK_RUNNING;
-		remove_wait_queue(&queue->proc_list, &wait);
-	}
-	while (i > 0 && !queue_empty()) {
-		c = get_from_queue();
-		put_user(c, buffer++);
-		i--;
-	}
-	if (count-i) {
-		struct inode *inode = file->f_dentry->d_inode;
-		inode->i_atime = current_fs_time(inode->i_sb);
-		return count-i;
-	}
-	if (signal_pending(current))
-		return -ERESTARTSYS;
-	return 0;
-}
-
-/*
- * Write to the aux device.
- */
-
-static ssize_t write_aux(struct file * file, const char * buffer,
-			 size_t count, loff_t *ppos)
-{
-	/*
-	 * The ITE boards this was tested on did not have the
-	 * transmit wires connected.
-	 */
-	return count;
-}
-
-static unsigned int aux_poll(struct file *file, poll_table * wait)
-{
-	poll_wait(file, &queue->proc_list, wait);
-	if (!queue_empty())
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-struct file_operations psaux_fops = {
-	.read		= read_aux,
-	.write		= write_aux,
-	.poll		= aux_poll,
-	.open		= open_aux,
-	.release	= release_aux,
-	.fasync		= fasync_aux,
-};
-
-/*
- * Initialize driver.
- */
-static struct miscdevice psaux_mouse = {
-	PSMOUSE_MINOR, "psaux", &psaux_fops
-};
-
-static int __init psaux_init(void)
-{
-	int retval;
-
-	retval = misc_register(&psaux_mouse);
-	if(retval < 0)
-		return retval;
-
-	queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
-	if (!queue) {
-		misc_deregister(&psaux_mouse);
-		return -ENOMEM;
-	}
-		
-	memset(queue, 0, sizeof(*queue));
-	queue->head = queue->tail = 0;
-	init_waitqueue_head(&queue->proc_list);
-
-	return 0;
-}
-module_init(init_qtronix_990P_kbd);
-#endif