Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 161 insertions, 0 deletions

diff --git a/drivers/char/rio/riospace.h b/drivers/char/rio/riospace.h
new file mode 100644
index 00000000000..32b09b0f23a
--- /dev/null
+++ b/drivers/char/rio/riospace.h
@@ -0,0 +1,161 @@
+/*
+** -----------------------------------------------------------------------------
+**
+**  Perle Specialix driver for Linux
+**  Ported from existing RIO Driver for SCO sources.
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**	Module		: riospace.h
+**	SID		: 1.2
+**	Last Modified	: 11/6/98 11:34:13
+**	Retrieved	: 11/6/98 11:34:22
+**
+**  ident @(#)riospace.h	1.2
+**
+** -----------------------------------------------------------------------------
+*/
+
+#ifndef __rio_riospace_h__
+#define __rio_riospace_h__
+
+#ifdef SCCS_LABELS
+static char *_riospace_h_sccs_ = "@(#)riospace.h	1.2";
+#endif
+
+#define	RIO_LOCATOR_LEN	16
+#define	MAX_RIO_BOARDS	4
+
+/*
+** DONT change this file. At all. Unless you can rebuild the entire
+** device driver, which you probably can't, then the rest of the
+** driver won't see any changes you make here. So don't make any.
+** In particular, it won't be able to see changes to RIO_SLOTS
+*/
+
+struct Conf
+{
+	char         Locator[24];
+	unsigned int StartupTime;
+	unsigned int SlowCook;
+	unsigned int IntrPollTime;
+	unsigned int BreakInterval;
+	unsigned int Timer;
+	unsigned int RtaLoadBase;
+	unsigned int HostLoadBase;
+	unsigned int XpHz;
+	unsigned int XpCps;
+	char         *XpOn;
+	char         *XpOff;
+	unsigned int MaxXpCps;
+	unsigned int MinXpCps;
+	unsigned int SpinCmds;
+	unsigned int FirstAddr;
+	unsigned int LastAddr;
+	unsigned int BufferSize;
+	unsigned int LowWater;
+	unsigned int LineLength;
+	unsigned int CmdTime;
+};
+
+/*
+**	Board types - these MUST correspond to product codes!
+*/ 
+#define	RIO_EMPTY	0x0
+#define	RIO_EISA	0x3
+#define	RIO_RTA_16	0x9
+#define	RIO_AT		0xA
+#define	RIO_MCA		0xB
+#define	RIO_PCI		0xD
+#define	RIO_RTA		0xE
+
+/*
+**	Board data structure. This is used for configuration info
+*/
+struct	Brd
+{
+    unsigned char Type;	/* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */
+    unsigned char Ivec;	/* POLLED or ivec number */
+    unsigned char Mode;	/* Control stuff, see below */
+};
+
+struct	Board
+{
+    char       Locator[RIO_LOCATOR_LEN];
+    int        NumSlots;
+    struct Brd Boards[MAX_RIO_BOARDS];
+};
+
+#define	BOOT_FROM_LINK		0x00
+#define	BOOT_FROM_RAM		0x01
+#define	EXTERNAL_BUS_OFF	0x00
+#define	EXTERNAL_BUS_ON		0x02
+#define	INTERRUPT_DISABLE	0x00
+#define	INTERRUPT_ENABLE	0x04
+#define	BYTE_OPERATION		0x00
+#define	WORD_OPERATION		0x08
+#define	POLLED			INTERRUPT_DISABLE
+#define	IRQ_15			(0x00 | INTERRUPT_ENABLE)
+#define	IRQ_12			(0x10 | INTERRUPT_ENABLE)
+#define	IRQ_11			(0x20 | INTERRUPT_ENABLE)
+#define	IRQ_9			(0x30 | INTERRUPT_ENABLE)
+#define	SLOW_LINKS		0x00
+#define	FAST_LINKS		0x40
+#define	SLOW_AT_BUS		0x00
+#define	FAST_AT_BUS		0x80
+#define	SLOW_PCI_TP		0x00
+#define	FAST_PCI_TP		0x80
+/*
+**	Debug levels
+*/
+#define	DBG_NONE	0x00000000
+
+#define	DBG_INIT	0x00000001
+#define	DBG_OPEN	0x00000002
+#define	DBG_CLOSE	0x00000004
+#define	DBG_IOCTL	0x00000008
+
+#define	DBG_READ	0x00000010
+#define	DBG_WRITE	0x00000020
+#define	DBG_INTR	0x00000040
+#define	DBG_PROC	0x00000080
+
+#define	DBG_PARAM	0x00000100
+#define	DBG_CMD		0x00000200
+#define	DBG_XPRINT	0x00000400
+#define	DBG_POLL	0x00000800
+
+#define	DBG_DAEMON	0x00001000
+#define	DBG_FAIL	0x00002000
+#define DBG_MODEM	0x00004000
+#define	DBG_LIST	0x00008000
+
+#define	DBG_ROUTE	0x00010000
+#define DBG_UTIL        0x00020000
+#define DBG_BOOT	0x00040000
+#define DBG_BUFFER	0x00080000
+
+#define	DBG_MON		0x00100000
+#define DBG_SPECIAL     0x00200000
+#define	DBG_VPIX	0x00400000
+#define	DBG_FLUSH	0x00800000
+
+#define	DBG_QENABLE	0x01000000
+
+#define	DBG_ALWAYS	0x80000000
+
+#endif /* __rio_riospace_h__ */