mv watchdog tree under drivers

move watchdog tree from drivers/char/watchdog to drivers/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

1 files changed, 0 insertions, 542 deletions

diff --git a/drivers/char/watchdog/w83977f_wdt.c b/drivers/char/watchdog/w83977f_wdt.c
deleted file mode 100644
index 15796844289..00000000000
--- a/drivers/char/watchdog/w83977f_wdt.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
- *	W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip
- *
- *	(c) Copyright 2005  Jose Goncalves <jose.goncalves@inov.pt>
- *
- *      Based on w83877f_wdt.c by Scott Jennings,
- *           and wdt977.c by Woody Suwalski
- *
- *			-----------------------
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-#define WATCHDOG_VERSION  "1.00"
-#define WATCHDOG_NAME     "W83977F WDT"
-#define PFX WATCHDOG_NAME ": "
-#define DRIVER_VERSION    WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
-
-#define IO_INDEX_PORT     0x3F0
-#define IO_DATA_PORT      (IO_INDEX_PORT+1)
-
-#define UNLOCK_DATA       0x87
-#define LOCK_DATA         0xAA
-#define DEVICE_REGISTER   0x07
-
-#define	DEFAULT_TIMEOUT   45		/* default timeout in seconds */
-
-static	int timeout = DEFAULT_TIMEOUT;
-static	int timeoutW;			/* timeout in watchdog counter units */
-static	unsigned long timer_alive;
-static	int testmode;
-static	char expect_close;
-static	spinlock_t spinlock;
-
-module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
-module_param(testmode, int, 0);
-MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/*
- * Start the watchdog
- */
-
-static int wdt_start(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&spinlock, flags);
-
-	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-
-	/*
-	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
-	 * F2 has the timeout in watchdog counter units.
-	 * F3 is set to enable watchdog LED blink at timeout.
-	 * F4 is used to just clear the TIMEOUT'ed state (bit 0).
-	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(timeoutW,IO_DATA_PORT);
-	outb_p(0xF3,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-
-	/* Set device Aux2 active */
-	outb_p(0x30,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
-
-	/* 
-	 * Select device Aux1 (dev=7) to set GP16 as the watchdog output
-	 * (in reg E6) and GP13 as the watchdog LED output (in reg E3).
-	 * Map GP16 at pin 119.
-	 * In test mode watch the bit 0 on F4 to indicate "triggered" or
-	 * check watchdog LED on SBC.
-	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x07,IO_DATA_PORT);
-	if (!testmode)
-	{
-		unsigned pin_map;
-
-		outb_p(0xE6,IO_INDEX_PORT);
-		outb_p(0x0A,IO_DATA_PORT);
-		outb_p(0x2C,IO_INDEX_PORT);
-		pin_map = inb_p(IO_DATA_PORT);
-		pin_map |= 0x10;
-		pin_map &= ~(0x20);
-		outb_p(0x2C,IO_INDEX_PORT);
-		outb_p(pin_map,IO_DATA_PORT);
-	}
-	outb_p(0xE3,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-
-	/* Set device Aux1 active */
-	outb_p(0x30,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
-
-	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
-
-	spin_unlock_irqrestore(&spinlock, flags);
-
-	printk(KERN_INFO PFX "activated.\n");
-
-	return 0;
-}
-
-/*
- * Stop the watchdog
- */
-
-static int wdt_stop(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&spinlock, flags);
-
-	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-
-	/* 
-	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
-	 * F2 is reset to its default value (watchdog timer disabled).
-	 * F3 is reset to its default state.
-	 * F4 clears the TIMEOUT'ed state (bit 0) - back to default.
-	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(0xFF,IO_DATA_PORT);
-	outb_p(0xF3,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(0x00,IO_DATA_PORT);
-
-	/*
-	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and 
-	 * Gp13 (in reg E3) as inputs.
-	 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x07,IO_DATA_PORT);
-	if (!testmode)
-	{
-		outb_p(0xE6,IO_INDEX_PORT);
-		outb_p(0x01,IO_DATA_PORT);
-	}
-	outb_p(0xE3,IO_INDEX_PORT);
-	outb_p(0x01,IO_DATA_PORT);
-
-	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
-
-	spin_unlock_irqrestore(&spinlock, flags);
-
-	printk(KERN_INFO PFX "shutdown.\n");
-
-	return 0;
-}
-
-/*
- * Send a keepalive ping to the watchdog
- * This is done by simply re-writing the timeout to reg. 0xF2
- */
-
-static int wdt_keepalive(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&spinlock, flags);
-
-	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-
-	/* Select device Aux2 (device=8) to kick watchdog reg F2 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF2,IO_INDEX_PORT);
-	outb_p(timeoutW,IO_DATA_PORT);
-
-	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
-
-	spin_unlock_irqrestore(&spinlock, flags);
-
-	return 0;
-}
-
-/*
- * Set the watchdog timeout value
- */
-
-static int wdt_set_timeout(int t)
-{
-	int tmrval;
-
-	/*
-	 * Convert seconds to watchdog counter time units, rounding up.
-	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup 
-	 * value. This information is supplied in the PCM-5335 manual and was
-	 * checked by me on a real board. This is a bit strange because W83977f
-	 * datasheet says counter unit is in minutes!
-	 */
-	if (t < 15)
-		return -EINVAL;
-
-	tmrval = ((t + 15) + 29) / 30;
-
-	if (tmrval > 255)
-		return -EINVAL;
-
-	/*
-	 * timeout is the timeout in seconds, 
-	 * timeoutW is the timeout in watchdog counter units.
-	 */
-	timeoutW = tmrval;
-	timeout = (timeoutW * 30) - 15;
-	return 0;
-}
-
-/*
- * Get the watchdog status
- */
-
-static int wdt_get_status(int *status)
-{
-	int new_status;
-	unsigned long flags;
-
-	spin_lock_irqsave(&spinlock, flags);
-
-	/* Unlock the SuperIO chip */
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-	outb_p(UNLOCK_DATA,IO_INDEX_PORT);
-
-	/* Select device Aux2 (device=8) to read watchdog reg F4 */
-	outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
-	outb_p(0x08,IO_DATA_PORT);
-	outb_p(0xF4,IO_INDEX_PORT);
-	new_status = inb_p(IO_DATA_PORT);
-
-	/* Lock the SuperIO chip */
-	outb_p(LOCK_DATA,IO_INDEX_PORT);
-
-	spin_unlock_irqrestore(&spinlock, flags);
-
-	*status = 0;
-	if (new_status & 1)
-		*status |= WDIOF_CARDRESET;
-
-	return 0;
-}
-
-
-/*
- *	/dev/watchdog handling
- */
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
-	/* If the watchdog is alive we don't need to start it again */
-	if( test_and_set_bit(0, &timer_alive) )
-		return -EBUSY;
-
-	if (nowayout)
-		__module_get(THIS_MODULE);
-
-	wdt_start();
-	return nonseekable_open(inode, file);
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
-	/*
-	 * Shut off the timer.
-	 * Lock it in if it's a module and we set nowayout
-	 */
-	if (expect_close == 42)
-	{
-		wdt_stop();
-		clear_bit(0, &timer_alive);
-	} else {
-		wdt_keepalive();
-		printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
-	}
-	expect_close = 0;
-	return 0;
-}
-
-/*
- *      wdt_write:
- *      @file: file handle to the watchdog
- *      @buf: buffer to write (unused as data does not matter here
- *      @count: count of bytes
- *      @ppos: pointer to the position to write. No seeks allowed
- *
- *      A write to a watchdog device is defined as a keepalive signal. Any
- *      write of data will do, as we we don't define content meaning.
- */
-
-static ssize_t wdt_write(struct file *file, const char __user *buf,
-			    size_t count, loff_t *ppos)
-{
-	/* See if we got the magic character 'V' and reload the timer */
-	if(count)
-	{
-		if (!nowayout)
-		{
-			size_t ofs;
-
-			/* note: just in case someone wrote the magic character long ago */
-			expect_close = 0;
-
-			/* scan to see whether or not we got the magic character */
-			for(ofs = 0; ofs != count; ofs++)
-			{
-				char c;
-				if (get_user(c, buf + ofs))
-					return -EFAULT;
-				if (c == 'V') {
-					expect_close = 42;
-				}
-			}
-		}
-
-		/* someone wrote to us, we should restart timer */
-		wdt_keepalive();
-	}
-	return count;
-}
-
-/*
- *      wdt_ioctl:
- *      @inode: inode of the device
- *      @file: file handle to the device
- *      @cmd: watchdog command
- *      @arg: argument pointer
- *
- *      The watchdog API defines a common set of functions for all watchdogs
- *      according to their available features.
- */
-
-static struct watchdog_info ident = {
-	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
-	.firmware_version =	1,
-	.identity = WATCHDOG_NAME,
-};
-
-static int wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
-{
-	int status;
-	int new_options, retval = -EINVAL;
-	int new_timeout;
-	union {
-		struct watchdog_info __user *ident;
-		int __user *i;
-	} uarg;
-
-	uarg.i = (int __user *)arg;
-
-	switch(cmd)
-	{
-	default:
-		return -ENOTTY;
-
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
-
-	case WDIOC_GETSTATUS:
-		wdt_get_status(&status);
-		return put_user(status, uarg.i);
-
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, uarg.i);
-
-	case WDIOC_KEEPALIVE:
-		wdt_keepalive();
-		return 0;
-
-	case WDIOC_SETOPTIONS:
-		if (get_user (new_options, uarg.i))
-			return -EFAULT;
-
-		if (new_options & WDIOS_DISABLECARD) {
-			wdt_stop();
-			retval = 0;
-		}
-
-		if (new_options & WDIOS_ENABLECARD) {
-			wdt_start();
-			retval = 0;
-		}
-
-		return retval;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, uarg.i))
-			return -EFAULT;
-
-		if (wdt_set_timeout(new_timeout))
-		    return -EINVAL;
-
-		wdt_keepalive();
-		/* Fall */
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(timeout, uarg.i);
-
-	}
-}
-
-static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
-	void *unused)
-{
-	if (code==SYS_DOWN || code==SYS_HALT)
-		wdt_stop();
-	return NOTIFY_DONE;
-}
-
-static const struct file_operations wdt_fops=
-{
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= wdt_write,
-	.ioctl		= wdt_ioctl,
-	.open		= wdt_open,
-	.release	= wdt_release,
-};
-
-static struct miscdevice wdt_miscdev=
-{
-	.minor		= WATCHDOG_MINOR,
-	.name		= "watchdog",
-	.fops		= &wdt_fops,
-};
-
-static struct notifier_block wdt_notifier = {
-	.notifier_call = wdt_notify_sys,
-};
-
-static int __init w83977f_wdt_init(void)
-{
-	int rc;
-
-        printk(KERN_INFO PFX DRIVER_VERSION);
-
-	spin_lock_init(&spinlock);
-
-	/*
-	 * Check that the timeout value is within it's range ; 
-	 * if not reset to the default
-	 */
-	if (wdt_set_timeout(timeout)) {
-		wdt_set_timeout(DEFAULT_TIMEOUT);
-		printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
-			DEFAULT_TIMEOUT);
-	}
-
-	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
-	{
-		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
-			IO_INDEX_PORT);
-		rc = -EIO;
-		goto err_out;
-	}
-
-	rc = misc_register(&wdt_miscdev);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
-			wdt_miscdev.minor, rc);
-		goto err_out_region;
-	}
-
-	rc = register_reboot_notifier(&wdt_notifier);
-	if (rc)
-	{
-		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
-			rc);
-		goto err_out_miscdev;
-	}
-
-	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
-		timeout, nowayout, testmode);
-
-	return 0;
-
-err_out_miscdev:
-	misc_deregister(&wdt_miscdev);
-err_out_region:
-	release_region(IO_INDEX_PORT,2);
-err_out:
-	return rc;
-}
-
-static void __exit w83977f_wdt_exit(void)
-{
-	wdt_stop();
-	misc_deregister(&wdt_miscdev);
-	unregister_reboot_notifier(&wdt_notifier);
-	release_region(IO_INDEX_PORT,2);
-}
-
-module_init(w83977f_wdt_init);
-module_exit(w83977f_wdt_exit);
-
-MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>");
-MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);