Merge ../scsi-rc-fixes-2.6

10 files changed, 1181 insertions, 21 deletions

diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index 89e46d6dfc4..0187b118532 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -13,7 +13,7 @@ config WATCHDOG
 	  subsequently opening the file and then failing to write to it for
 	  longer than 1 minute will result in rebooting the machine. This
 	  could be useful for a networked machine that needs to come back
-	  online as fast as possible after a lock-up. There's both a watchdog
+	  on-line as fast as possible after a lock-up. There's both a watchdog
 	  implementation entirely in software (which can sometimes fail to
 	  reboot the machine) and a driver for hardware watchdog boards, which
 	  are more robust and can also keep track of the temperature inside
@@ -60,7 +60,7 @@ config SOFT_WATCHDOG
 
 # ARM Architecture
 
-config AT91_WATCHDOG
+config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
 	depends on WATCHDOG && ARCH_AT91RM9200
 	help
@@ -71,7 +71,7 @@ config 21285_WATCHDOG
 	tristate "DC21285 watchdog"
 	depends on WATCHDOG && FOOTBRIDGE
 	help
-	  The Intel Footbridge chip contains a builtin watchdog circuit. Say Y
+	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
 	  here if you wish to use this. Alternatively say M to compile the
 	  driver as a module, which will be called wdt285.
 
@@ -269,11 +269,11 @@ config IB700_WDT
 	  Most people will say N.
 
 config IBMASR
-        tristate "IBM Automatic Server Restart"
-        depends on WATCHDOG && X86
-        help
+	tristate "IBM Automatic Server Restart"
+	depends on WATCHDOG && X86
+	help
 	  This is the driver for the IBM Automatic Server Restart watchdog
-	  timer builtin into some eServer xSeries machines.
+	  timer built-in into some eServer xSeries machines.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ibmasr.
@@ -316,13 +316,16 @@ config I8XX_TCO
 	  To compile this driver as a module, choose M here: the
 	  module will be called i8xx_tco.
 
+	  Note: This driver will be removed in the near future. Please
+	  use the Intel TCO Timer/Watchdog driver.
+
 config ITCO_WDT
-	tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)"
-	depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL
+	tristate "Intel TCO Timer/Watchdog"
+	depends on WATCHDOG && (X86 || IA64) && PCI
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller
-	  Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB
+	  Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
 	  controller hub.
 
 	  The TCO (Total Cost of Ownership) timer is a watchdog timer
@@ -395,6 +398,26 @@ config CPU5_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called cpu5wdt.
 
+config SMSC37B787_WDT
+	tristate "Winbond SMsC37B787 Watchdog Timer"
+	depends on WATCHDOG && X86
+	---help---
+	  This is the driver for the hardware watchdog component on the
+	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
+	  from Vision Systems and maybe others.
+
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  Usually a userspace daemon will notify the kernel WDT driver that
+	  userspace is still alive, at regular intervals.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called smsc37b787_wdt.
+
+	  Most people will say N.
+
 config W83627HF_WDT
 	tristate "W83627HF Watchdog Timer"
 	depends on WATCHDOG && X86
@@ -410,6 +433,21 @@ config W83627HF_WDT
 
 	  Most people will say N.
 
+config W83697HF_WDT
+	tristate "W83697HF/W83697HG Watchdog Timer"
+	depends on WATCHDOG && X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83697HF/HG
+	  chipset as used in Dedibox/VIA motherboards (and likely others).
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83697hf_wdt.
+
+	  Most people will say N.
+
 config W83877F_WDT
 	tristate "W83877F (EMACS) Watchdog Timer"
 	depends on WATCHDOG && X86
@@ -443,7 +481,7 @@ config MACHZ_WDT
 	depends on WATCHDOG && X86
 	---help---
 	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
-	  N.  This is the driver for the watchdog timer builtin on that
+	  N.  This is the driver for the watchdog timer built-in on that
 	  processor using ZF-Logic interface.  This watchdog simply watches
 	  your kernel to make sure it doesn't freeze, and if it does, it
 	  reboots your computer after a certain amount of time.
@@ -472,7 +510,6 @@ config SBC_EPX_C3_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called sbc_epx_c3.
 
-
 # PowerPC Architecture
 
 config 8xx_WDT
@@ -502,7 +539,7 @@ config WATCHDOG_RTAS
 	help
 	  This driver adds watchdog support for the RTAS watchdog.
 
-          To compile this driver as a module, choose M here. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called wdrtas.
 
 # MIPS Architecture
@@ -556,7 +593,7 @@ config SH_WDT_MMAP
 	help
 	  If you say Y here, user applications will be able to mmap the
 	  WDT/CPG registers.
-#
+
 # SPARC64 Architecture
 
 config WATCHDOG_CP1XXX
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index 7f70abad465..36440497047 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o
 obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
 
 # ARM Architecture
-obj-$(CONFIG_AT91_WATCHDOG) += at91_wdt.o
+obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
 obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
 obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
 obj-$(CONFIG_977_WATCHDOG) += wdt977.o
@@ -53,7 +53,9 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
 obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
 obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
 obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
+obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
 obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
+obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
 obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
 obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
 obj-$(CONFIG_MACHZ_WDT) += machzwd.o
diff --git a/drivers/char/watchdog/alim7101_wdt.c b/drivers/char/watchdog/alim7101_wdt.c
index 5948863b592..bf25d0a55a9 100644
--- a/drivers/char/watchdog/alim7101_wdt.c
+++ b/drivers/char/watchdog/alim7101_wdt.c
@@ -77,7 +77,8 @@ static struct pci_dev *alim7101_pmu;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __stringify(CONFIG_WATCHDOG_NOWAYOUT) ")");
 
 /*
  *	Whack the dog
@@ -415,6 +416,16 @@ err_out:
 module_init(alim7101_wdt_init);
 module_exit(alim7101_wdt_unload);
 
+static struct pci_device_id alim7101_pci_tbl[] __devinitdata = {
+	{ PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, alim7101_pci_tbl);
+
 MODULE_AUTHOR("Steve Hill");
 MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/watchdog/at91_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c
index 4e7a1145e78..4e7a1145e78 100644
--- a/drivers/char/watchdog/at91_wdt.c
+++ b/drivers/char/watchdog/at91rm9200_wdt.c
diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c
index aaac94db0d8..b6f29cb8bd3 100644
--- a/drivers/char/watchdog/iTCO_wdt.c
+++ b/drivers/char/watchdog/iTCO_wdt.c
@@ -35,6 +35,10 @@
  *	82801GDH (ICH7DH)    : document number 307013-002, 307014-009,
  *	82801GBM (ICH7-M)    : document number 307013-002, 307014-009,
  *	82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
+ *	82801HB  (ICH8)      : document number 313056-002, 313057-004,
+ *	82801HR  (ICH8R)     : document number 313056-002, 313057-004,
+ *	82801HH  (ICH8DH)    : document number 313056-002, 313057-004,
+ *	82801HO  (ICH8DO)    : document number 313056-002, 313057-004,
  *	6300ESB  (6300ESB)   : document number 300641-003
  */
 
@@ -45,7 +49,7 @@
 /* Module and version information */
 #define DRV_NAME        "iTCO_wdt"
 #define DRV_VERSION     "1.00"
-#define DRV_RELDATE     "30-Jul-2006"
+#define DRV_RELDATE     "08-Oct-2006"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -85,6 +89,9 @@ enum iTCO_chipsets {
 	TCO_ICH7,	/* ICH7 & ICH7R */
 	TCO_ICH7M,	/* ICH7-M */
 	TCO_ICH7MDH,	/* ICH7-M DH */
+	TCO_ICH8,	/* ICH8 & ICH8R */
+	TCO_ICH8DH,	/* ICH8DH */
+	TCO_ICH8DO,	/* ICH8DO */
 };
 
 static struct {
@@ -108,6 +115,9 @@ static struct {
 	{"ICH7 or ICH7R", 2},
 	{"ICH7-M", 2},
 	{"ICH7-M DH", 2},
+	{"ICH8 or ICH8R", 2},
+	{"ICH8DH", 2},
+	{"ICH8DO", 2},
 	{NULL,0}
 };
 
@@ -135,6 +145,9 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7    },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M   },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8    },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH  },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO  },
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
@@ -355,7 +368,8 @@ static int iTCO_wdt_get_timeleft (int *time_left)
 		spin_unlock(&iTCO_wdt_private.io_lock);
 
 		*time_left = (val8 * 6) / 10;
-	}
+	} else
+		return -EINVAL;
 	return 0;
 }
 
@@ -426,7 +440,6 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
 {
 	int new_options, retval = -EINVAL;
 	int new_heartbeat;
-	int time_left;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
@@ -486,6 +499,8 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
 
 		case WDIOC_GETTIMELEFT:
 		{
+			int time_left;
+
 			if (iTCO_wdt_get_timeleft(&time_left))
 				return -EINVAL;
 
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 68b1ca976d5..18cb050c386 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -380,18 +380,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res == NULL) {
 		printk(KERN_INFO PFX "failed to get irq resource\n");
+		iounmap(wdt_base);
 		return -ENOENT;
 	}
 
 	ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev);
 	if (ret != 0) {
 		printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
+		iounmap(wdt_base);
 		return ret;
 	}
 
 	wdt_clock = clk_get(&pdev->dev, "watchdog");
 	if (wdt_clock == NULL) {
 		printk(KERN_INFO PFX "failed to find watchdog clock source\n");
+		iounmap(wdt_base);
 		return -ENOENT;
 	}
 
@@ -415,6 +418,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (ret) {
 		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n",
 			WATCHDOG_MINOR, ret);
+		iounmap(wdt_base);
 		return ret;
 	}
 
@@ -451,6 +455,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 		wdt_clock = NULL;
 	}
 
+	iounmap(wdt_base);
 	misc_deregister(&s3c2410wdt_miscdev);
 	return 0;
 }
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index d8d0f28e0ac..e3239833e4b 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -392,7 +392,7 @@ static int __init sc1200wdt_init(void)
 	if (io == -1) {
 		printk(KERN_ERR PFX "io parameter must be specified\n");
 		ret = -EINVAL;
-		goto out_clean;
+		goto out_pnp;
 	}
 
 #if defined CONFIG_PNP
@@ -405,7 +405,7 @@ static int __init sc1200wdt_init(void)
 	if (!request_region(io, io_len, SC1200_MODULE_NAME)) {
 		printk(KERN_ERR PFX "Unable to register IO port %#x\n", io);
 		ret = -EBUSY;
-		goto out_clean;
+		goto out_pnp;
 	}
 
 	ret = sc1200wdt_probe();
@@ -435,6 +435,11 @@ out_rbt:
 out_io:
 	release_region(io, io_len);
 
+out_pnp:
+#if defined CONFIG_PNP
+	if (isapnp)
+		pnp_unregister_driver(&scl200wdt_pnp_driver);
+#endif
 	goto out_clean;
 }
 
diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c
new file mode 100644
index 00000000000..9f56913b484
--- /dev/null
+++ b/drivers/char/watchdog/smsc37b787_wdt.c
@@ -0,0 +1,627 @@
+/*
+ *	SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
+ *
+ *      Based on acquirewdt.c by Alan Cox <alan@redhat.com>
+ *       and some other existing drivers
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	The authors do NOT admit liability nor provide warranty for
+ *	any of this software. This material is provided "AS-IS" in
+ *      the hope that it may be useful for others.
+ *
+ *	(C) Copyright 2003-2006  Sven Anders <anders@anduras.de>
+ *
+ *  History:
+ *	2003 - Created version 1.0 for Linux 2.4.x.
+ *	2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
+ *             features. Released version 1.1
+ *
+ *  Theory of operation:
+ *
+ *      A Watchdog Timer (WDT) is a hardware circuit that can
+ *      reset the computer system in case of a software fault.
+ *      You probably knew that already.
+ *
+ *      Usually a userspace daemon will notify the kernel WDT driver
+ *      via the /dev/watchdog special device file that userspace is
+ *      still alive, at regular intervals.  When such a notification
+ *      occurs, the driver will usually tell the hardware watchdog
+ *      that everything is in order, and that the watchdog should wait
+ *      for yet another little while to reset the system.
+ *      If userspace fails (RAM error, kernel bug, whatever), the
+ *      notifications cease to occur, and the hardware watchdog will
+ *      reset the system (causing a reboot) after the timeout occurs.
+ *
+ * Create device with:
+ *  mknod /dev/watchdog c 10 130
+ *
+ * For an example userspace keep-alive daemon, see:
+ *   Documentation/watchdog/watchdog.txt
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+/* enable support for minutes as units? */
+/* (does not always work correctly, so disabled by default!) */
+#define SMSC_SUPPORT_MINUTES
+#undef SMSC_SUPPORT_MINUTES
+
+#define MAX_TIMEOUT     255
+
+#define UNIT_SECOND     0
+#define UNIT_MINUTE     1
+
+#define MODNAME		"smsc37b787_wdt: "
+#define VERSION         "1.1"
+
+#define IOPORT          0x3F0
+#define IOPORT_SIZE     2
+#define IODEV_NO        8
+
+static int unit = UNIT_SECOND;  /* timer's unit */
+static int timeout = 60;        /* timeout value: default is 60 "units" */
+static unsigned long timer_enabled = 0;   /* is the timer enabled? */
+
+static char expect_close;       /* is the close expected? */
+
+static spinlock_t io_lock;	/* to guard the watchdog from io races */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+/* -- Low level function ----------------------------------------*/
+
+/* unlock the IO chip */
+
+static inline void open_io_config(void)
+{
+        outb(0x55, IOPORT);
+	mdelay(1);
+        outb(0x55, IOPORT);
+}
+
+/* lock the IO chip */
+static inline void close_io_config(void)
+{
+        outb(0xAA, IOPORT);
+}
+
+/* select the IO device */
+static inline void select_io_device(unsigned char devno)
+{
+        outb(0x07, IOPORT);
+        outb(devno, IOPORT+1);
+}
+
+/* write to the control register */
+static inline void write_io_cr(unsigned char reg, unsigned char data)
+{
+        outb(reg, IOPORT);
+        outb(data, IOPORT+1);
+}
+
+/* read from the control register */
+static inline char read_io_cr(unsigned char reg)
+{
+        outb(reg, IOPORT);
+        return inb(IOPORT+1);
+}
+
+/* -- Medium level functions ------------------------------------*/
+
+static inline void gpio_bit12(unsigned char reg)
+{
+	// -- General Purpose I/O Bit 1.2 --
+	// Bit 0,   In/Out: 0 = Output, 1 = Input
+	// Bit 1,   Polarity: 0 = No Invert, 1 = Invert
+	// Bit 2,   Group Enable Intr.: 0 = Disable, 1 = Enable
+	// Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
+	//                           11 = Either Edge Triggered Intr. 2
+        // Bit 5/6  (Reserved)
+	// Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
+        write_io_cr(0xE2, reg);
+}
+
+static inline void gpio_bit13(unsigned char reg)
+{
+	// -- General Purpose I/O Bit 1.3 --
+	// Bit 0,  In/Out: 0 = Output, 1 = Input
+	// Bit 1,  Polarity: 0 = No Invert, 1 = Invert
+	// Bit 2,  Group Enable Intr.: 0 = Disable, 1 = Enable
+	// Bit 3,  Function select: 0 = GPI/O, 1 = LED
+        // Bit 4-6 (Reserved)
+	// Bit 7,  Output Type: 0 = Push Pull Bit, 1 = Open Drain
+        write_io_cr(0xE3, reg);
+}
+
+static inline void wdt_timer_units(unsigned char new_units)
+{
+	// -- Watchdog timer units --
+	// Bit 0-6 (Reserved)
+	// Bit 7,  WDT Time-out Value Units Select
+	//         (0 = Minutes, 1 = Seconds)
+        write_io_cr(0xF1, new_units);
+}
+
+static inline void wdt_timeout_value(unsigned char new_timeout)
+{
+	// -- Watchdog Timer Time-out Value --
+	// Bit 0-7 Binary coded units (0=Disabled, 1..255)
+        write_io_cr(0xF2, new_timeout);
+}
+
+static inline void wdt_timer_conf(unsigned char conf)
+{
+	// -- Watchdog timer configuration --
+	// Bit 0   Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O
+	// Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+	// Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr.
+        // Bit 3   Reset the timer
+        //         (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled)
+	// Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+	//            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+        write_io_cr(0xF3, conf);
+}
+
+static inline void wdt_timer_ctrl(unsigned char reg)
+{
+	// -- Watchdog timer control --
+	// Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+	// Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
+	// Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+	// Bit 3   P20 Force Timeout enabled:
+	//          0 = P20 activity does not generate the WD timeout event
+	//          1 = P20 Allows rising edge of P20, from the keyboard
+	//              controller, to force the WD timeout event.
+	// Bit 4   (Reserved)
+	// -- Soft power management --
+	// Bit 5   Stop Counter: 1 = Stop software power down counter
+	//            set via register 0xB8, (self-cleaning)
+	//            (Upon read: 0 = Counter running, 1 = Counter stopped)
+	// Bit 6   Restart Counter: 1 = Restart software power down counter
+	//            set via register 0xB8, (self-cleaning)
+	// Bit 7   SPOFF: 1 = Force software power down (self-cleaning)
+
+        write_io_cr(0xF4, reg);
+}
+
+/* -- Higher level functions ------------------------------------*/
+
+/* initialize watchdog */
+
+static void wb_smsc_wdt_initialize(void)
+{
+        unsigned char old;
+
+	spin_lock(&io_lock);
+        open_io_config();
+        select_io_device(IODEV_NO);
+
+	// enable the watchdog
+	gpio_bit13(0x08);  // Select pin 80 = LED not GPIO
+	gpio_bit12(0x0A);  // Set pin 79 = WDT not GPIO/Output/Polarity=Invert
+
+	// disable the timeout
+        wdt_timeout_value(0);
+
+	// reset control register
+        wdt_timer_ctrl(0x00);
+
+	// reset configuration register
+	wdt_timer_conf(0x00);
+
+	// read old (timer units) register
+        old = read_io_cr(0xF1) & 0x7F;
+        if (unit == UNIT_SECOND) old |= 0x80; // set to seconds
+
+	// set the watchdog timer units
+        wdt_timer_units(old);
+
+        close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* shutdown the watchdog */
+
+static void wb_smsc_wdt_shutdown(void)
+{
+	spin_lock(&io_lock);
+        open_io_config();
+        select_io_device(IODEV_NO);
+
+	// disable the watchdog
+        gpio_bit13(0x09);
+        gpio_bit12(0x09);
+
+	// reset watchdog config register
+	wdt_timer_conf(0x00);
+
+	// reset watchdog control register
+        wdt_timer_ctrl(0x00);
+
+	// disable timeout
+        wdt_timeout_value(0x00);
+
+        close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* set timeout => enable watchdog */
+
+static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
+{
+	spin_lock(&io_lock);
+        open_io_config();
+        select_io_device(IODEV_NO);
+
+	// set Power LED to blink, if we enable the timeout
+        wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
+
+	// set timeout value
+        wdt_timeout_value(new_timeout);
+
+        close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* get timeout */
+
+static unsigned char wb_smsc_wdt_get_timeout(void)
+{
+        unsigned char set_timeout;
+
+	spin_lock(&io_lock);
+        open_io_config();
+        select_io_device(IODEV_NO);
+        set_timeout = read_io_cr(0xF2);
+        close_io_config();
+	spin_unlock(&io_lock);
+
+        return set_timeout;
+}
+
+/* disable watchdog */
+
+static void wb_smsc_wdt_disable(void)
+{
+        // set the timeout to 0 to disable the watchdog
+        wb_smsc_wdt_set_timeout(0);
+}
+
+/* enable watchdog by setting the current timeout */
+
+static void wb_smsc_wdt_enable(void)
+{
+        // set the current timeout...
+        wb_smsc_wdt_set_timeout(timeout);
+}
+
+/* reset the timer */
+
+static void wb_smsc_wdt_reset_timer(void)
+{
+	spin_lock(&io_lock);
+        open_io_config();
+        select_io_device(IODEV_NO);
+
+	// reset the timer
+	wdt_timeout_value(timeout);
+	wdt_timer_conf(0x08);
+
+        close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* return, if the watchdog is enabled (timeout is set...) */
+
+static int wb_smsc_wdt_status(void)
+{
+	return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING;
+}
+
+
+/* -- File operations -------------------------------------------*/
+
+/* open => enable watchdog and set initial timeout */
+
+static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+
+	if (test_and_set_bit(0, &timer_enabled))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Reload and activate timer */
+	wb_smsc_wdt_enable();
+
+	printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+
+	return nonseekable_open(inode, file);
+}
+
+/* close => shut off the timer */
+
+static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer. */
+
+	if (expect_close == 42) {
+	        wb_smsc_wdt_disable();
+		printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n");
+	} else {
+		printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n");
+		wb_smsc_wdt_reset_timer();
+	}
+
+	clear_bit(0, &timer_enabled);
+	expect_close = 0;
+	return 0;
+}
+
+/* write => update the timer to keep the machine alive */
+
+static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
+				 size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* reset expect flag */
+			expect_close = 0;
+
+			/* scan to see whether or not we got the magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data+i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		wb_smsc_wdt_reset_timer();
+	}
+	return len;
+}
+
+/* ioctl => control interface */
+
+static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	int new_timeout;
+
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	static struct watchdog_info ident = {
+		.options = 		WDIOF_KEEPALIVEPING |
+		                        WDIOF_SETTIMEOUT |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	0,
+		.identity = 		"SMsC 37B787 Watchdog"
+	};
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+		default:
+			return -ENOTTY;
+
+		case WDIOC_GETSUPPORT:
+			return copy_to_user(uarg.ident, &ident,
+				sizeof(ident)) ? -EFAULT : 0;
+
+		case WDIOC_GETSTATUS:
+			return put_user(wb_smsc_wdt_status(), uarg.i);
+
+		case WDIOC_GETBOOTSTATUS:
+			return put_user(0, uarg.i);
+
+		case WDIOC_KEEPALIVE:
+			wb_smsc_wdt_reset_timer();
+			return 0;
+
+		case WDIOC_SETTIMEOUT:
+			if (get_user(new_timeout, uarg.i))
+				return -EFAULT;
+
+			// the API states this is given in secs
+			if (unit == UNIT_MINUTE)
+			  new_timeout /= 60;
+
+			if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+				return -EINVAL;
+
+			timeout = new_timeout;
+			wb_smsc_wdt_set_timeout(timeout);
+
+			// fall through and return the new timeout...
+
+		case WDIOC_GETTIMEOUT:
+
+		        new_timeout = timeout;
+
+			if (unit == UNIT_MINUTE)
+			  new_timeout *= 60;
+
+			return put_user(new_timeout, uarg.i);
+
+		case WDIOC_SETOPTIONS:
+		{
+			int options, retval = -EINVAL;
+
+			if (get_user(options, uarg.i))
+				return -EFAULT;
+
+			if (options & WDIOS_DISABLECARD) {
+				wb_smsc_wdt_disable();
+				retval = 0;
+			}
+
+			if (options & WDIOS_ENABLECARD) {
+				wb_smsc_wdt_enable();
+				retval = 0;
+			}
+
+			return retval;
+		}
+	}
+}
+
+/* -- Notifier funtions -----------------------------------------*/
+
+static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+	{
+                // set timeout to 0, to avoid possible race-condition
+	        timeout = 0;
+		wb_smsc_wdt_disable();
+	}
+	return NOTIFY_DONE;
+}
+
+/* -- Module's structures ---------------------------------------*/
+
+static struct file_operations wb_smsc_wdt_fops =
+{
+	.owner          = THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wb_smsc_wdt_write,
+	.ioctl		= wb_smsc_wdt_ioctl,
+	.open		= wb_smsc_wdt_open,
+	.release	= wb_smsc_wdt_release,
+};
+
+static struct notifier_block wb_smsc_wdt_notifier =
+{
+	.notifier_call  = wb_smsc_wdt_notify_sys,
+};
+
+static struct miscdevice wb_smsc_wdt_miscdev =
+{
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &wb_smsc_wdt_fops,
+};
+
+/* -- Module init functions -------------------------------------*/
+
+/* module's "constructor" */
+
+static int __init wb_smsc_wdt_init(void)
+{
+	int ret;
+
+	spin_lock_init(&io_lock);
+
+	printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
+
+	if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
+		printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT);
+		ret = -EBUSY;
+		goto out_pnp;
+	}
+
+        // set new maximum, if it's too big
+        if (timeout > MAX_TIMEOUT)
+               timeout = MAX_TIMEOUT;
+
+        // init the watchdog timer
+        wb_smsc_wdt_initialize();
+
+	ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
+	if (ret) {
+		printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret);
+		goto out_io;
+	}
+
+	ret = misc_register(&wb_smsc_wdt_miscdev);
+	if (ret) {
+		printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+		goto out_rbt;
+	}
+
+	// output info
+	printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+	printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout);
+
+	// ret = 0
+
+out_clean:
+	return ret;
+
+out_rbt:
+	unregister_reboot_notifier(&wb_smsc_wdt_notifier);
+
+out_io:
+	release_region(IOPORT, IOPORT_SIZE);
+
+out_pnp:
+	goto out_clean;
+}
+
+/* module's "destructor" */
+
+static void __exit wb_smsc_wdt_exit(void)
+{
+	/* Stop the timer before we leave */
+	if (!nowayout)
+	{
+		wb_smsc_wdt_shutdown();
+		printk(KERN_INFO MODNAME "Watchdog disabled.\n");
+	}
+
+	misc_deregister(&wb_smsc_wdt_miscdev);
+	unregister_reboot_notifier(&wb_smsc_wdt_notifier);
+	release_region(IOPORT, IOPORT_SIZE);
+
+	printk("SMsC 37B787 watchdog component driver removed.\n");
+}
+
+module_init(wb_smsc_wdt_init);
+module_exit(wb_smsc_wdt_exit);
+
+MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
+MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+#ifdef SMSC_SUPPORT_MINUTES
+module_param(unit, int, 0);
+MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0");
+#endif
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c
index b4adc527e68..07d4bff2722 100644
--- a/drivers/char/watchdog/w83627hf_wdt.c
+++ b/drivers/char/watchdog/w83627hf_wdt.c
@@ -33,6 +33,7 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/spinlock.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -44,6 +45,7 @@
 
 static unsigned long wdt_is_open;
 static char expect_close;
+static spinlock_t io_lock;
 
 /* You must set this - there is no sane way to probe for this board. */
 static int wdt_io = 0x2E;
@@ -110,12 +112,16 @@ w83627hf_init(void)
 static void
 wdt_ctrl(int timeout)
 {
+	spin_lock(&io_lock);
+	
 	w83627hf_select_wd_register();
 
 	outb_p(0xF6, WDT_EFER);    /* Select CRF6 */
 	outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
 
 	w83627hf_unselect_wd_register();
+
+	spin_unlock(&io_lock);
 }
 
 static int
@@ -303,6 +309,8 @@ wdt_init(void)
 {
 	int ret;
 
+	spin_lock_init(&io_lock);
+
 	printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n");
 
 	if (wdt_set_heartbeat(timeout)) {
diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c
new file mode 100644
index 00000000000..7768b55487c
--- /dev/null
+++ b/drivers/char/watchdog/w83697hf_wdt.c
@@ -0,0 +1,450 @@
+/*
+ *	w83697hf/hg WDT driver
+ *
+ *	(c) Copyright 2006 Samuel Tardieu <sam@rfc1149.net>
+ *	(c) Copyright 2006 Marcus Junker <junker@anduras.de>
+ *
+ *	Based on w83627hf_wdt.c which is based on advantechwdt.c
+ *	which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 2003 Pádraig Brady <P@draigBrady.com>
+ *
+ *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *				http://www.redhat.com
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Marcus Junker nor ANDURAS AG admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#define WATCHDOG_NAME "w83697hf/hg WDT"
+#define PFX WATCHDOG_NAME ": "
+#define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
+
+static unsigned long wdt_is_open;
+static char expect_close;
+static spinlock_t io_lock;
+
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_io = 0x2e;
+module_param(wdt_io, int, 0);
+MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
+
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ *	Kernel methods.
+ */
+
+#define W83697HF_EFER (wdt_io+0)	/* Extended Function Enable Register */
+#define W83697HF_EFIR (wdt_io+0)	/* Extended Function Index Register (same as EFER) */
+#define W83697HF_EFDR (wdt_io+1)	/* Extended Function Data Register */
+
+static inline void
+w83697hf_unlock(void)
+{
+	outb_p(0x87, W83697HF_EFER);	/* Enter extended function mode */
+	outb_p(0x87, W83697HF_EFER);	/* Again according to manual */
+}
+
+static inline void
+w83697hf_lock(void)
+{
+	outb_p(0xAA, W83697HF_EFER);	/* Leave extended function mode */
+}
+
+/*
+ *	The three functions w83697hf_get_reg(), w83697hf_set_reg() and
+ *	w83697hf_write_timeout() must be called with the device unlocked.
+ */
+
+static unsigned char
+w83697hf_get_reg(unsigned char reg)
+{
+	outb_p(reg, W83697HF_EFIR);
+	return inb_p(W83697HF_EFDR);
+}
+
+static void
+w83697hf_set_reg(unsigned char reg, unsigned char data)
+{
+	outb_p(reg, W83697HF_EFIR);
+	outb_p(data, W83697HF_EFDR);
+}
+
+static void
+w83697hf_write_timeout(int timeout)
+{
+	w83697hf_set_reg(0xF4, timeout);	/* Write Timeout counter to CRF4 */
+}
+
+static void
+w83697hf_select_wdt(void)
+{
+	w83697hf_unlock();
+	w83697hf_set_reg(0x07, 0x08);	/* Switch to logic device 8 (GPIO2) */
+}
+
+static inline void
+w83697hf_deselect_wdt(void)
+{
+	w83697hf_lock();
+}
+
+static void
+w83697hf_init(void)
+{
+	unsigned char bbuf;
+
+	w83697hf_select_wdt();
+
+	bbuf = w83697hf_get_reg(0x29);
+	bbuf &= ~0x60;
+	bbuf |= 0x20;
+	w83697hf_set_reg(0x29, bbuf);	/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+
+	bbuf = w83697hf_get_reg(0xF3);
+	bbuf &= ~0x04;
+	w83697hf_set_reg(0xF3, bbuf);	/* Count mode is seconds */
+
+	w83697hf_deselect_wdt();
+}
+
+static int
+wdt_ping(void)
+{
+	spin_lock(&io_lock);
+	w83697hf_select_wdt();
+
+	w83697hf_write_timeout(timeout);
+
+	w83697hf_deselect_wdt();
+	spin_unlock(&io_lock);
+	return 0;
+}
+
+static int
+wdt_enable(void)
+{
+	spin_lock(&io_lock);
+	w83697hf_select_wdt();
+
+	w83697hf_write_timeout(timeout);
+	w83697hf_set_reg(0x30, 1);	/* Enable timer */
+
+	w83697hf_deselect_wdt();
+	spin_unlock(&io_lock);
+	return 0;
+}
+
+static int
+wdt_disable(void)
+{
+	spin_lock(&io_lock);
+	w83697hf_select_wdt();
+
+	w83697hf_set_reg(0x30, 0);	/* Disable timer */
+	w83697hf_write_timeout(0);
+
+	w83697hf_deselect_wdt();
+	spin_unlock(&io_lock);
+	return 0;
+}
+
+static int
+wdt_set_heartbeat(int t)
+{
+	if ((t < 1) || (t > 255))
+		return -EINVAL;
+
+	timeout = t;
+	return 0;
+}
+
+static ssize_t
+wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf+i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		wdt_ping();
+	}
+	return count;
+}
+
+static int
+wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+	  unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_timeout;
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "W83697HF WDT",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			wdt_enable();
+			retval = 0;
+		}
+
+		return retval;
+	}
+
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int
+wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+	/*
+	 *	Activate
+	 */
+
+	wdt_enable();
+	return nonseekable_open(inode, file);
+}
+
+static int
+wdt_close(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		wdt_disable();
+	} else {
+		printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+		wdt_ping();
+	}
+	expect_close = 0;
+	clear_bit(0, &wdt_is_open);
+	return 0;
+}
+
+/*
+ *	Notifier for system down
+ */
+
+static int
+wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		/* Turn the WDT off */
+		wdt_disable();
+	}
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdt_write,
+	.ioctl		= wdt_ioctl,
+	.open		= wdt_open,
+	.release	= wdt_close,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wdt_fops,
+};
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static int
+w83697hf_check_wdt(void)
+{
+	if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
+		printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io);
+		return -EIO;
+	}
+
+	printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io);
+	w83697hf_unlock();
+	if (w83697hf_get_reg(0x20) == 0x60) {
+		printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io);
+		w83697hf_lock();
+		return 0;
+	}
+	w83697hf_lock();	/* Reprotect in case it was a compatible device */
+
+	printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
+	release_region(wdt_io, 2);
+	return -EIO;
+}
+
+static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 };
+
+static int __init
+wdt_init(void)
+{
+	int ret, i, found = 0;
+
+	spin_lock_init(&io_lock);
+
+	printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
+
+	if (wdt_io == 0) {
+		/* we will autodetect the W83697HF/HG watchdog */
+		for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) {
+			wdt_io = w83697hf_ioports[i];
+			if (!w83697hf_check_wdt())
+				found++;
+		}
+	} else {
+		if (!w83697hf_check_wdt())
+			found++;
+	}
+
+	if (!found) {
+		printk (KERN_ERR PFX "No W83697HF/HG could be found\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	w83697hf_init();
+	wdt_disable();	/* Disable watchdog until first use */
+
+	if (wdt_set_heartbeat(timeout)) {
+		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
+		printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
+			WATCHDOG_TIMEOUT);
+	}
+
+	ret = register_reboot_notifier(&wdt_notifier);
+	if (ret != 0) {
+		printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+			ret);
+		goto unreg_regions;
+	}
+
+	ret = misc_register(&wdt_miscdev);
+	if (ret != 0) {
+		printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+			WATCHDOG_MINOR, ret);
+		goto unreg_reboot;
+	}
+
+	printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+out:
+	return ret;
+unreg_reboot:
+	unregister_reboot_notifier(&wdt_notifier);
+unreg_regions:
+	release_region(wdt_io, 2);
+	goto out;
+}
+
+static void __exit
+wdt_exit(void)
+{
+	misc_deregister(&wdt_miscdev);
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(wdt_io, 2);
+}
+
+module_init(wdt_init);
+module_exit(wdt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>");
+MODULE_DESCRIPTION("w83697hf/hg WDT driver");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);