[POWERPC] Xilinx: hwicap driver

This includes code for new fifo-based xps_hwicap in addition to the
older opb_hwicap, which has a significantly different interface.  The
common code between the two drivers is largely shared.

Significant differences exists between this driver and what is
supported in the EDK drivers.  In particular, most of the
architecture-specific code for reconfiguring individual FPGA resources
has been removed.  This functionality is likely better provided in a
user-space support library.  In addition, read and write access is
supported.  In addition, although the xps_hwicap cores support
interrupt-driver mode, this driver only supports polled operation, in
order to make the code simpler, and since the interrupt processing
overhead is likely to slow down the throughput under Linux.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 193 insertions, 0 deletions

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
new file mode 100644
index 00000000000..ae771cac162
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -0,0 +1,193 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2003-2007 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_HWICAP_H_	/* prevent circular inclusions */
+#define XILINX_HWICAP_H_	/* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+struct hwicap_drvdata {
+	u32 write_buffer_in_use;  /* Always in [0,3] */
+	u8 write_buffer[4];
+	u32 read_buffer_in_use;	  /* Always in [0,3] */
+	u8 read_buffer[4];
+	u32 mem_start;		  /* phys. address of the control registers */
+	u32 mem_end;		  /* phys. address of the control registers */
+	u32 mem_size;
+	void __iomem *base_address;/* virt. address of the control registers */
+
+	struct device *dev;
+	struct cdev cdev;	/* Char device structure */
+	dev_t devt;
+
+	const struct hwicap_driver_config *config;
+	const struct config_registers *config_regs;
+	void *private_data;
+	bool is_open;
+	struct semaphore sem;
+};
+
+struct hwicap_driver_config {
+	int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+			u32 size);
+	int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+			u32 size);
+	void (*reset)(struct hwicap_drvdata *drvdata);
+};
+
+/* Number of times to poll the done regsiter */
+#define XHI_MAX_RETRIES     10
+
+/************ Constant Definitions *************/
+
+#define XHI_PAD_FRAMES              0x1
+
+/* Mask for calculating configuration packet headers */
+#define XHI_WORD_COUNT_MASK_TYPE_1  0x7FFUL
+#define XHI_WORD_COUNT_MASK_TYPE_2  0x1FFFFFUL
+#define XHI_TYPE_MASK               0x7
+#define XHI_REGISTER_MASK           0xF
+#define XHI_OP_MASK                 0x3
+
+#define XHI_TYPE_SHIFT              29
+#define XHI_REGISTER_SHIFT          13
+#define XHI_OP_SHIFT                27
+
+#define XHI_TYPE_1                  1
+#define XHI_TYPE_2                  2
+#define XHI_OP_WRITE                2
+#define XHI_OP_READ                 1
+
+/* Address Block Types */
+#define XHI_FAR_CLB_BLOCK           0
+#define XHI_FAR_BRAM_BLOCK          1
+#define XHI_FAR_BRAM_INT_BLOCK      2
+
+struct config_registers {
+	u32 CRC;
+	u32 FAR;
+	u32 FDRI;
+	u32 FDRO;
+	u32 CMD;
+	u32 CTL;
+	u32 MASK;
+	u32 STAT;
+	u32 LOUT;
+	u32 COR;
+	u32 MFWR;
+	u32 FLR;
+	u32 KEY;
+	u32 CBC;
+	u32 IDCODE;
+	u32 AXSS;
+	u32 C0R_1;
+	u32 CSOB;
+	u32 WBSTAR;
+	u32 TIMER;
+	u32 BOOTSTS;
+	u32 CTL_1;
+};
+
+/* Configuration Commands */
+#define XHI_CMD_NULL                0
+#define XHI_CMD_WCFG                1
+#define XHI_CMD_MFW                 2
+#define XHI_CMD_DGHIGH              3
+#define XHI_CMD_RCFG                4
+#define XHI_CMD_START               5
+#define XHI_CMD_RCAP                6
+#define XHI_CMD_RCRC                7
+#define XHI_CMD_AGHIGH              8
+#define XHI_CMD_SWITCH              9
+#define XHI_CMD_GRESTORE            10
+#define XHI_CMD_SHUTDOWN            11
+#define XHI_CMD_GCAPTURE            12
+#define XHI_CMD_DESYNCH             13
+#define XHI_CMD_IPROG               15 /* Only in Virtex5 */
+#define XHI_CMD_CRCC                16 /* Only in Virtex5 */
+#define XHI_CMD_LTIMER              17 /* Only in Virtex5 */
+
+/* Packet constants */
+#define XHI_SYNC_PACKET             0xAA995566UL
+#define XHI_DUMMY_PACKET            0xFFFFFFFFUL
+#define XHI_NOOP_PACKET             (XHI_TYPE_1 << XHI_TYPE_SHIFT)
+#define XHI_TYPE_2_READ ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+			(XHI_OP_READ << XHI_OP_SHIFT))
+
+#define XHI_TYPE_2_WRITE ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+			(XHI_OP_WRITE << XHI_OP_SHIFT))
+
+#define XHI_TYPE2_CNT_MASK          0x07FFFFFF
+
+#define XHI_TYPE_1_PACKET_MAX_WORDS 2047UL
+#define XHI_TYPE_1_HEADER_BYTES     4
+#define XHI_TYPE_2_HEADER_BYTES     8
+
+/* Constant to use for CRC check when CRC has been disabled */
+#define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
+
+/**
+ * hwicap_type_1_read: Generates a Type 1 read packet header.
+ * @parameter: Register is the address of the register to be read back.
+ *
+ * Generates a Type 1 read packet header, which is used to indirectly
+ * read registers in the configuration logic.  This packet must then
+ * be sent through the icap device, and a return packet received with
+ * the information.
+ **/
+static inline u32 hwicap_type_1_read(u32 Register)
+{
+	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+		(Register << XHI_REGISTER_SHIFT) |
+		(XHI_OP_READ << XHI_OP_SHIFT);
+}
+
+/**
+ * hwicap_type_1_write: Generates a Type 1 write packet header
+ * @parameter: Register is the address of the register to be read back.
+ **/
+static inline u32 hwicap_type_1_write(u32 Register)
+{
+	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+		(Register << XHI_REGISTER_SHIFT) |
+		(XHI_OP_WRITE << XHI_OP_SHIFT);
+}
+
+#endif