ARM: nomadik: convert all clocks except timer to dt

This moves all Nomadik clocks except the one used for the
timer/clocksource over to the device tree.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 7 insertions, 19 deletions

diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 6b4c70f7d23..19f197ccf28 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -3,24 +3,24 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk-provider.h>
+#include <linux/of.h>
 
 /*
  * The Nomadik clock tree is described in the STN8815A12 DB V4.2
  * reference manual for the chip, page 94 ff.
  */
 
+static const __initconst struct of_device_id cpu8815_clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ /* sentinel */ }
+};
+
 void __init nomadik_clk_init(void)
 {
 	struct clk *clk;
 
 	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
 	clk_register_clkdev(clk, "apb_pclk", NULL);
-	clk_register_clkdev(clk, NULL, "gpio.0");
-	clk_register_clkdev(clk, NULL, "gpio.1");
-	clk_register_clkdev(clk, NULL, "gpio.2");
-	clk_register_clkdev(clk, NULL, "gpio.3");
-	clk_register_clkdev(clk, NULL, "rng");
-	clk_register_clkdev(clk, NULL, "fsmc-nand");
 
 	/*
 	 * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
@@ -32,17 +32,5 @@ void __init nomadik_clk_init(void)
 	clk_register_clkdev(clk, NULL, "mtu0");
 	clk_register_clkdev(clk, NULL, "mtu1");
 
-	/*
-	 * At boot time, PLL2 is set to generate a set of fixed clocks,
-	 * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
-	 * I2C, IrDA, USB and SSP blocks.
-	 */
-	clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
-				      48000000);
-	clk_register_clkdev(clk, NULL, "uart0");
-	clk_register_clkdev(clk, NULL, "uart1");
-	clk_register_clkdev(clk, NULL, "mmci");
-	clk_register_clkdev(clk, NULL, "ssp");
-	clk_register_clkdev(clk, NULL, "nmk-i2c.0");
-	clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+	of_clk_init(cpu8815_clk_match);
 }