clk: tegra: Make gr2d and gr3d clocks children of pll_c

By default these clocks are children of pll_m, but in downstream kernels
they are reparented to pll_c. While at it, decrease their frequencies to
300 MHz because the defaults aren't in the specified range.

gr2d can reportedly run at much higher frequencies, but 300 MHz works
and is a more conservative default.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

2 files changed, 4 insertions, 0 deletions

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index b92d48be4cc..f87bd4a8c32 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1247,6 +1247,8 @@ static __initdata struct tegra_clk_init_table init_table[] = {
 	{host1x, pll_c, 150000000, 0},
 	{disp1, pll_p, 600000000, 0},
 	{disp2, pll_p, 600000000, 0},
+	{gr2d, pll_c, 300000000, 0},
+	{gr3d, pll_c, 300000000, 0},
 	{clk_max, clk_max, 0, 0}, /* This MUST be the last entry */
 };
 
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index ba6f51bc9f3..b8b241de3f4 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1911,6 +1911,8 @@ static __initdata struct tegra_clk_init_table init_table[] = {
 	{disp1, pll_p, 600000000, 0},
 	{disp2, pll_p, 600000000, 0},
 	{twd, clk_max, 0, 1},
+	{gr2d, pll_c, 300000000, 0},
+	{gr3d, pll_c, 300000000, 0},
 	{clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
 };