Merge branch 'spear/clock' into next/clock

Viresh Kumar <viresh.kumar@st.com> writes:

 This is rebased over a (merge of Mike's/clk-next & SPEAr's DT) + Russell's
 patch: CLKDEV: provide helpers for common clock framework rebased over them.

* spear/clock:
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock

Conflicts:
	drivers/clk/Makefile

[Arnd: rebased again without the spear/dt branch]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

10 files changed, 2014 insertions, 1 deletions

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4a5bdbc3038..b9a5158a30b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -2,5 +2,6 @@
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o clk-fixed-factor.o
-
+# SoCs specific
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
+obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
new file mode 100644
index 00000000000..335886049c8
--- /dev/null
+++ b/drivers/clk/spear/Makefile
@@ -0,0 +1,8 @@
+#
+# SPEAr Clock specific Makefile
+#
+
+obj-y	+= clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx_clock.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx_clock.o
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
new file mode 100644
index 00000000000..af34074e702
--- /dev/null
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Auxiliary Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-aux-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: Auxiliary Synthesizer clock
+ *
+ * Aux synth gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2		EQ1
+ * Fout2 = Fin * X/Y			EQ2
+ */
+
+#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw)
+
+static struct aux_clk_masks default_aux_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = AUX_XSCALE_MASK,
+	.xscale_sel_shift = AUX_XSCALE_SHIFT,
+	.yscale_sel_mask = AUX_YSCALE_MASK,
+	.yscale_sel_shift = AUX_YSCALE_SHIFT,
+	.enable_bit = AUX_SYNT_ENB,
+};
+
+static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate,
+		int index)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	struct aux_rate_tbl *rtbl = aux->rtbl;
+	u8 eq = rtbl[index].eq ? 1 : 2;
+
+	return (((prate / 10000) * rtbl[index].xscale) /
+			(rtbl[index].yscale * eq)) * 10000;
+}
+
+static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, aux_calc_rate,
+			aux->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_aux_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	unsigned int num = 1, den = 1, val, eqn;
+	unsigned long flags = 0;
+
+	if (aux->lock)
+		spin_lock_irqsave(aux->lock, flags);
+
+	val = readl_relaxed(aux->reg);
+
+	if (aux->lock)
+		spin_unlock_irqrestore(aux->lock, flags);
+
+	eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask;
+	if (eqn == aux->masks->eq1_mask)
+		den = 2;
+
+	/* calculate numerator */
+	num = (val >> aux->masks->xscale_sel_shift) &
+		aux->masks->xscale_sel_mask;
+
+	/* calculate denominator */
+	den *= (val >> aux->masks->yscale_sel_shift) &
+		aux->masks->yscale_sel_mask;
+
+	if (!den)
+		return 0;
+
+	return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of aux */
+static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	struct aux_rate_tbl *rtbl = aux->rtbl;
+	unsigned long val, flags = 0;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt,
+			&i);
+
+	if (aux->lock)
+		spin_lock_irqsave(aux->lock, flags);
+
+	val = readl_relaxed(aux->reg) &
+		~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift);
+	val |= (rtbl[i].eq & aux->masks->eq_sel_mask) <<
+		aux->masks->eq_sel_shift;
+	val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift);
+	val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) <<
+		aux->masks->xscale_sel_shift;
+	val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift);
+	val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) <<
+		aux->masks->yscale_sel_shift;
+	writel_relaxed(val, aux->reg);
+
+	if (aux->lock)
+		spin_unlock_irqrestore(aux->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_aux_ops = {
+	.recalc_rate = clk_aux_recalc_rate,
+	.round_rate = clk_aux_round_rate,
+	.set_rate = clk_aux_set_rate,
+};
+
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+		const char *parent_name, unsigned long flags, void __iomem *reg,
+		struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+		u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk)
+{
+	struct clk_aux *aux;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	aux = kzalloc(sizeof(*aux), GFP_KERNEL);
+	if (!aux) {
+		pr_err("could not allocate aux clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_aux assignments */
+	if (!masks)
+		aux->masks = &default_aux_masks;
+	else
+		aux->masks = masks;
+
+	aux->reg = reg;
+	aux->rtbl = rtbl;
+	aux->rtbl_cnt = rtbl_cnt;
+	aux->lock = lock;
+	aux->hw.init = &init;
+
+	init.name = aux_name;
+	init.ops = &clk_aux_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &aux->hw);
+	if (IS_ERR_OR_NULL(clk))
+		goto free_aux;
+
+	if (gate_name) {
+		struct clk *tgate_clk;
+
+		tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg,
+				aux->masks->enable_bit, 0, lock);
+		if (IS_ERR_OR_NULL(tgate_clk))
+			goto free_aux;
+
+		if (gate_clk)
+			*gate_clk = tgate_clk;
+	}
+
+	return clk;
+
+free_aux:
+	kfree(aux);
+	pr_err("clk register failed\n");
+
+	return NULL;
+}
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
new file mode 100644
index 00000000000..4dbdb3fe18e
--- /dev/null
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Fractional Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-frac-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define DIV_FACTOR_MASK		0x1FFFF
+
+/*
+ * DOC: Fractional Synthesizer clock
+ *
+ * Fout from synthesizer can be given from below equation:
+ *
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ *	0-13 (fractional part)
+ *	14-16 (integer part)
+ *	div is (16-14 bits).(13-0 bits) (in binary)
+ *
+ *	Fout = Fin/(2 * div)
+ *	Fout = ((Fin / 10000)/(2 * div)) * 10000
+ *	Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000
+ *	Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000
+ *
+ * div << 14 simply 17 bit value written at register.
+ * Max error due to scaling down by 10000 is 10 KHz
+ */
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate,
+		int index)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	struct frac_rate_tbl *rtbl = frac->rtbl;
+
+	prate /= 10000;
+	prate <<= 14;
+	prate /= (2 * rtbl[index].div);
+	prate *= 10000;
+
+	return prate;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, frac_calc_rate,
+			frac->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	unsigned long flags = 0;
+	unsigned int div = 1, val;
+
+	if (frac->lock)
+		spin_lock_irqsave(frac->lock, flags);
+
+	val = readl_relaxed(frac->reg);
+
+	if (frac->lock)
+		spin_unlock_irqrestore(frac->lock, flags);
+
+	div = val & DIV_FACTOR_MASK;
+
+	if (!div)
+		return 0;
+
+	parent_rate = parent_rate / 10000;
+
+	parent_rate = (parent_rate << 14) / (2 * div);
+	return parent_rate * 10000;
+}
+
+/* Configures new clock rate of frac */
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	struct frac_rate_tbl *rtbl = frac->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt,
+			&i);
+
+	if (frac->lock)
+		spin_lock_irqsave(frac->lock, flags);
+
+	val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK;
+	val |= rtbl[i].div & DIV_FACTOR_MASK;
+	writel_relaxed(val, frac->reg);
+
+	if (frac->lock)
+		spin_unlock_irqrestore(frac->lock, flags);
+
+	return 0;
+}
+
+struct clk_ops clk_frac_ops = {
+	.recalc_rate = clk_frac_recalc_rate,
+	.round_rate = clk_frac_round_rate,
+	.set_rate = clk_frac_set_rate,
+};
+
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+		unsigned long flags, void __iomem *reg,
+		struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock)
+{
+	struct clk_init_data init;
+	struct clk_frac *frac;
+	struct clk *clk;
+
+	if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+	if (!frac) {
+		pr_err("could not allocate frac clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_frac assignments */
+	frac->reg = reg;
+	frac->rtbl = rtbl;
+	frac->rtbl_cnt = rtbl_cnt;
+	frac->lock = lock;
+	frac->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_frac_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &frac->hw);
+	if (!IS_ERR_OR_NULL(clk))
+		return clk;
+
+	pr_err("clk register failed\n");
+	kfree(frac);
+
+	return NULL;
+}
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
new file mode 100644
index 00000000000..b471c9762a9
--- /dev/null
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * General Purpose Timer Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-gpt-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+/*
+ * DOC: General Purpose Timer Synthesizer clock
+ *
+ * Calculates gpt synth clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+
+#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw)
+
+static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate,
+		int index)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	struct gpt_rate_tbl *rtbl = gpt->rtbl;
+
+	prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1));
+
+	return prate;
+}
+
+static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate,
+			gpt->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	unsigned long flags = 0;
+	unsigned int div = 1, val;
+
+	if (gpt->lock)
+		spin_lock_irqsave(gpt->lock, flags);
+
+	val = readl_relaxed(gpt->reg);
+
+	if (gpt->lock)
+		spin_unlock_irqrestore(gpt->lock, flags);
+
+	div += val & GPT_MSCALE_MASK;
+	div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+
+	if (!div)
+		return 0;
+
+	return parent_rate / div;
+}
+
+/* Configures new clock rate of gpt */
+static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	struct gpt_rate_tbl *rtbl = gpt->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt,
+			&i);
+
+	if (gpt->lock)
+		spin_lock_irqsave(gpt->lock, flags);
+
+	val = readl(gpt->reg) & ~GPT_MSCALE_MASK;
+	val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT);
+
+	val |= rtbl[i].mscale & GPT_MSCALE_MASK;
+	val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT;
+
+	writel_relaxed(val, gpt->reg);
+
+	if (gpt->lock)
+		spin_unlock_irqrestore(gpt->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_gpt_ops = {
+	.recalc_rate = clk_gpt_recalc_rate,
+	.round_rate = clk_gpt_round_rate,
+	.set_rate = clk_gpt_set_rate,
+};
+
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+		long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+		rtbl_cnt, spinlock_t *lock)
+{
+	struct clk_init_data init;
+	struct clk_gpt *gpt;
+	struct clk *clk;
+
+	if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	gpt = kzalloc(sizeof(*gpt), GFP_KERNEL);
+	if (!gpt) {
+		pr_err("could not allocate gpt clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_gpt assignments */
+	gpt->reg = reg;
+	gpt->rtbl = rtbl;
+	gpt->rtbl_cnt = rtbl_cnt;
+	gpt->lock = lock;
+	gpt->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_gpt_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &gpt->hw);
+	if (!IS_ERR_OR_NULL(clk))
+		return clk;
+
+	pr_err("clk register failed\n");
+	kfree(gpt);
+
+	return NULL;
+}
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
new file mode 100644
index 00000000000..dcd4bdf4b0d
--- /dev/null
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * VCO-PLL clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-vco-pll: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: VCO-PLL clock
+ *
+ * VCO and PLL rate are derived from following equations:
+ *
+ * In normal mode
+ * vco = (2 * M[15:8] * Fin)/N
+ *
+ * In Dithered mode
+ * vco = (2 * M[15:0] * Fin)/(256 * N)
+ *
+ * pll_rate = pll/2^p
+ *
+ * vco and pll are very closely bound to each other, "vco needs to program:
+ * mode, m & n" and "pll needs to program p", both share common enable/disable
+ * logic.
+ *
+ * clk_register_vco_pll() registers instances of both vco & pll.
+ * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its
+ * set_rate to vco. A single rate table exists for both the clocks, which
+ * configures m, n and p.
+ */
+
+/* PLL_CTR register masks */
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSM	2
+#define PLL_MODE_DITH_SSM	3
+#define PLL_MODE_MASK		3
+#define PLL_MODE_SHIFT		3
+#define PLL_ENABLE		2
+
+#define PLL_LOCK_SHIFT		0
+#define PLL_LOCK_MASK		1
+
+/* PLL FRQ register masks */
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DIV_P_MASK		0x7
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_N_SHIFT		0
+
+#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw)
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Calculates pll clk rate for specific value of mode, m, n and p */
+static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl,
+		unsigned long prate, int index, unsigned long *pll_rate)
+{
+	unsigned long rate = prate;
+	unsigned int mode;
+
+	mode = rtbl[index].mode ? 256 : 1;
+	rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n));
+
+	if (pll_rate)
+		*pll_rate = (rate / (1 << rtbl[index].p)) * 10000;
+
+	return rate * 10000;
+}
+
+static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate,
+				unsigned long *prate, int *index)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	unsigned long prev_rate, vco_prev_rate, rate = 0;
+	unsigned long vco_parent_rate =
+		__clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
+
+	if (!prate) {
+		pr_err("%s: prate is must for pll clk\n", __func__);
+		return -EINVAL;
+	}
+
+	for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) {
+		prev_rate = rate;
+		vco_prev_rate = *prate;
+		*prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index,
+				&rate);
+		if (drate < rate) {
+			/* previous clock was best */
+			if (*index) {
+				rate = prev_rate;
+				*prate = vco_prev_rate;
+				(*index)--;
+			}
+			break;
+		}
+	}
+
+	return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long *prate)
+{
+	int unused;
+
+	return clk_pll_round_rate_index(hw, drate, prate, &unused);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long
+		parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	unsigned long flags = 0;
+	unsigned int p;
+
+	if (pll->vco->lock)
+		spin_lock_irqsave(pll->vco->lock, flags);
+
+	p = readl_relaxed(pll->vco->cfg_reg);
+
+	if (pll->vco->lock)
+		spin_unlock_irqrestore(pll->vco->lock, flags);
+
+	p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+
+	return parent_rate / (1 << p);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	struct pll_rate_tbl *rtbl = pll->vco->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_pll_round_rate_index(hw, drate, NULL, &i);
+
+	if (pll->vco->lock)
+		spin_lock_irqsave(pll->vco->lock, flags);
+
+	val = readl_relaxed(pll->vco->cfg_reg);
+	val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT);
+	val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT;
+	writel_relaxed(val, pll->vco->cfg_reg);
+
+	if (pll->vco->lock)
+		spin_unlock_irqrestore(pll->vco->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_pll_ops = {
+	.recalc_rate = clk_pll_recalc_rate,
+	.round_rate = clk_pll_round_rate,
+	.set_rate = clk_pll_set_rate,
+};
+
+static inline unsigned long vco_calc_rate(struct clk_hw *hw,
+		unsigned long prate, int index)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+
+	return pll_calc_rate(vco->rtbl, prate, index, NULL);
+}
+
+static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, vco_calc_rate,
+			vco->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_vco_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+	unsigned long flags = 0;
+	unsigned int num = 2, den = 0, val, mode = 0;
+
+	if (vco->lock)
+		spin_lock_irqsave(vco->lock, flags);
+
+	mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK;
+
+	val = readl_relaxed(vco->cfg_reg);
+
+	if (vco->lock)
+		spin_unlock_irqrestore(vco->lock, flags);
+
+	den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+	/* calculate numerator & denominator */
+	if (!mode) {
+		/* Normal mode */
+		num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+	} else {
+		/* Dithered mode */
+		num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+		den *= 256;
+	}
+
+	if (!den) {
+		WARN(1, "%s: denominator can't be zero\n", __func__);
+		return 0;
+	}
+
+	return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of vco */
+static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+	struct pll_rate_tbl *rtbl = vco->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt,
+			&i);
+
+	if (vco->lock)
+		spin_lock_irqsave(vco->lock, flags);
+
+	val = readl_relaxed(vco->mode_reg);
+	val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT);
+	val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT;
+	writel_relaxed(val, vco->mode_reg);
+
+	val = readl_relaxed(vco->cfg_reg);
+	val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT);
+	val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT;
+
+	val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT);
+	if (rtbl[i].mode)
+		val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) <<
+			PLL_DITH_FDBK_M_SHIFT;
+	else
+		val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) <<
+			PLL_NORM_FDBK_M_SHIFT;
+
+	writel_relaxed(val, vco->cfg_reg);
+
+	if (vco->lock)
+		spin_unlock_irqrestore(vco->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_vco_ops = {
+	.recalc_rate = clk_vco_recalc_rate,
+	.round_rate = clk_vco_round_rate,
+	.set_rate = clk_vco_set_rate,
+};
+
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+		const char *vco_gate_name, const char *parent_name,
+		unsigned long flags, void __iomem *mode_reg, void __iomem
+		*cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+		spinlock_t *lock, struct clk **pll_clk,
+		struct clk **vco_gate_clk)
+{
+	struct clk_vco *vco;
+	struct clk_pll *pll;
+	struct clk *vco_clk, *tpll_clk, *tvco_gate_clk;
+	struct clk_init_data vco_init, pll_init;
+	const char **vco_parent_name;
+
+	if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg ||
+			!rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+	if (!vco) {
+		pr_err("could not allocate vco clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll) {
+		pr_err("could not allocate pll clk\n");
+		goto free_vco;
+	}
+
+	/* struct clk_vco assignments */
+	vco->mode_reg = mode_reg;
+	vco->cfg_reg = cfg_reg;
+	vco->rtbl = rtbl;
+	vco->rtbl_cnt = rtbl_cnt;
+	vco->lock = lock;
+	vco->hw.init = &vco_init;
+
+	pll->vco = vco;
+	pll->hw.init = &pll_init;
+
+	if (vco_gate_name) {
+		tvco_gate_clk = clk_register_gate(NULL, vco_gate_name,
+				parent_name, 0, mode_reg, PLL_ENABLE, 0, lock);
+		if (IS_ERR_OR_NULL(tvco_gate_clk))
+			goto free_pll;
+
+		if (vco_gate_clk)
+			*vco_gate_clk = tvco_gate_clk;
+		vco_parent_name = &vco_gate_name;
+	} else {
+		vco_parent_name = &parent_name;
+	}
+
+	vco_init.name = vco_name;
+	vco_init.ops = &clk_vco_ops;
+	vco_init.flags = flags;
+	vco_init.parent_names = vco_parent_name;
+	vco_init.num_parents = 1;
+
+	pll_init.name = pll_name;
+	pll_init.ops = &clk_pll_ops;
+	pll_init.flags = CLK_SET_RATE_PARENT;
+	pll_init.parent_names = &vco_name;
+	pll_init.num_parents = 1;
+
+	vco_clk = clk_register(NULL, &vco->hw);
+	if (IS_ERR_OR_NULL(vco_clk))
+		goto free_pll;
+
+	tpll_clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR_OR_NULL(tpll_clk))
+		goto free_pll;
+
+	if (pll_clk)
+		*pll_clk = tpll_clk;
+
+	return vco_clk;
+
+free_pll:
+	kfree(pll);
+free_vco:
+	kfree(vco);
+
+	pr_err("Failed to register vco pll clock\n");
+
+	return ERR_PTR(-ENOMEM);
+}
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
new file mode 100644
index 00000000000..376d4e5ff32
--- /dev/null
+++ b/drivers/clk/spear/clk.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * SPEAr clk - Common routines
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/types.h>
+#include "clk.h"
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+		unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+		int *index)
+{
+	unsigned long prev_rate, rate = 0;
+
+	for (*index = 0; *index < rtbl_cnt; (*index)++) {
+		prev_rate = rate;
+		rate = calc_rate(hw, parent_rate, *index);
+		if (drate < rate) {
+			/* previous clock was best */
+			if (*index) {
+				rate = prev_rate;
+				(*index)--;
+			}
+			break;
+		}
+	}
+
+	return rate;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
new file mode 100644
index 00000000000..3321c46a071
--- /dev/null
+++ b/drivers/clk/spear/clk.h
@@ -0,0 +1,134 @@
+/*
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __SPEAR_CLK_H
+#define __SPEAR_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+
+/* Auxiliary Synth clk */
+/* Default masks */
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
+#define AUX_SYNT_ENB		31
+
+struct aux_clk_masks {
+	u32 eq_sel_mask;
+	u32 eq_sel_shift;
+	u32 eq1_mask;
+	u32 eq2_mask;
+	u32 xscale_sel_mask;
+	u32 xscale_sel_shift;
+	u32 yscale_sel_mask;
+	u32 yscale_sel_shift;
+	u32 enable_bit;
+};
+
+struct aux_rate_tbl {
+	u16 xscale;
+	u16 yscale;
+	u8 eq;
+};
+
+struct clk_aux {
+	struct			clk_hw hw;
+	void __iomem		*reg;
+	struct aux_clk_masks	*masks;
+	struct aux_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
+/* Fractional Synth clk */
+struct frac_rate_tbl {
+	u32 div;
+};
+
+struct clk_frac {
+	struct			clk_hw hw;
+	void __iomem		*reg;
+	struct frac_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
+/* GPT clk */
+struct gpt_rate_tbl {
+	u16 mscale;
+	u16 nscale;
+};
+
+struct clk_gpt {
+	struct			clk_hw hw;
+	void __iomem		*reg;
+	struct gpt_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
+/* VCO-PLL clk */
+struct pll_rate_tbl {
+	u8 mode;
+	u16 m;
+	u8 n;
+	u8 p;
+};
+
+struct clk_vco {
+	struct			clk_hw hw;
+	void __iomem		*mode_reg;
+	void __iomem		*cfg_reg;
+	struct pll_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
+struct clk_pll {
+	struct			clk_hw hw;
+	struct clk_vco		*vco;
+	const char		*parent[1];
+	spinlock_t		*lock;
+};
+
+typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate,
+		int index);
+
+/* clk register routines */
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+		const char *parent_name, unsigned long flags, void __iomem *reg,
+		struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+		u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk);
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+		unsigned long flags, void __iomem *reg,
+		struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+		long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+		rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+		const char *vco_gate_name, const char *parent_name,
+		unsigned long flags, void __iomem *mode_reg, void __iomem
+		*cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+		spinlock_t *lock, struct clk **pll_clk,
+		struct clk **vco_gate_clk);
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+		unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+		int *index);
+
+#endif /* __SPEAR_CLK_H */
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
new file mode 100644
index 00000000000..440bb3e4c97
--- /dev/null
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -0,0 +1,612 @@
+/*
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR			(MISC_BASE + 0x008)
+#define PLL1_FRQ			(MISC_BASE + 0x00C)
+#define PLL2_CTR			(MISC_BASE + 0x014)
+#define PLL2_FRQ			(MISC_BASE + 0x018)
+#define PLL_CLK_CFG			(MISC_BASE + 0x020)
+	/* PLL_CLK_CFG register masks */
+	#define MCTR_CLK_SHIFT		28
+	#define MCTR_CLK_MASK		3
+
+#define CORE_CLK_CFG			(MISC_BASE + 0x024)
+	/* CORE CLK CFG register masks */
+	#define GEN_SYNTH2_3_CLK_SHIFT	18
+	#define GEN_SYNTH2_3_CLK_MASK	1
+
+	#define HCLK_RATIO_SHIFT	10
+	#define HCLK_RATIO_MASK		2
+	#define PCLK_RATIO_SHIFT	8
+	#define PCLK_RATIO_MASK		2
+
+#define PERIP_CLK_CFG			(MISC_BASE + 0x028)
+	/* PERIP_CLK_CFG register masks */
+	#define UART_CLK_SHIFT		4
+	#define UART_CLK_MASK		1
+	#define FIRDA_CLK_SHIFT		5
+	#define FIRDA_CLK_MASK		2
+	#define GPT0_CLK_SHIFT		8
+	#define GPT1_CLK_SHIFT		11
+	#define GPT2_CLK_SHIFT		12
+	#define GPT_CLK_MASK		1
+
+#define PERIP1_CLK_ENB			(MISC_BASE + 0x02C)
+	/* PERIP1_CLK_ENB register masks */
+	#define UART_CLK_ENB		3
+	#define SSP_CLK_ENB		5
+	#define I2C_CLK_ENB		7
+	#define JPEG_CLK_ENB		8
+	#define FIRDA_CLK_ENB		10
+	#define GPT1_CLK_ENB		11
+	#define GPT2_CLK_ENB		12
+	#define ADC_CLK_ENB		15
+	#define RTC_CLK_ENB		17
+	#define GPIO_CLK_ENB		18
+	#define DMA_CLK_ENB		19
+	#define SMI_CLK_ENB		21
+	#define GMAC_CLK_ENB		23
+	#define USBD_CLK_ENB		24
+	#define USBH_CLK_ENB		25
+	#define C3_CLK_ENB		31
+
+#define RAS_CLK_ENB			(MISC_BASE + 0x034)
+	#define RAS_AHB_CLK_ENB		0
+	#define RAS_PLL1_CLK_ENB	1
+	#define RAS_APB_CLK_ENB		2
+	#define RAS_32K_CLK_ENB		3
+	#define RAS_24M_CLK_ENB		4
+	#define RAS_48M_CLK_ENB		5
+	#define RAS_PLL2_CLK_ENB	7
+	#define RAS_SYNT0_CLK_ENB	8
+	#define RAS_SYNT1_CLK_ENB	9
+	#define RAS_SYNT2_CLK_ENB	10
+	#define RAS_SYNT3_CLK_ENB	11
+
+#define PRSC0_CLK_CFG			(MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG			(MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG			(MISC_BASE + 0x04C)
+#define AMEM_CLK_CFG			(MISC_BASE + 0x050)
+	#define AMEM_CLK_ENB		0
+
+#define CLCD_CLK_SYNT			(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT			(MISC_BASE + 0x060)
+#define UART_CLK_SYNT			(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT			(MISC_BASE + 0x068)
+#define GEN0_CLK_SYNT			(MISC_BASE + 0x06C)
+#define GEN1_CLK_SYNT			(MISC_BASE + 0x070)
+#define GEN2_CLK_SYNT			(MISC_BASE + 0x074)
+#define GEN3_CLK_SYNT			(MISC_BASE + 0x078)
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	{.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */
+	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For PLL1 = 332 MHz */
+	{.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
+	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+	/* For pll1 = 332 MHz */
+	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+	{.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* clock parents */
+static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
+static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+	"pll2_clk", };
+
+#ifdef CONFIG_MACH_SPEAR300
+static void __init spear300_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+			1, 1);
+	clk_register_clkdev(clk, NULL, "60000000.clcd");
+
+	clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "94000000.flash");
+
+	clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+	clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a9000000.gpio");
+
+	clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a0000000.kbd");
+}
+#endif
+
+/* array of all spear 310 clock lookups */
+#ifdef CONFIG_MACH_SPEAR310
+static void __init spear310_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "emi", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "44000000.flash");
+
+	clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "tdm");
+
+	clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2000000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2080000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2100000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2180000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2200000.serial");
+}
+#endif
+
+/* array of all spear 320 clock lookups */
+#ifdef CONFIG_MACH_SPEAR320
+	#define SMII_PCLK_SHIFT				18
+	#define SMII_PCLK_MASK				2
+	#define SMII_PCLK_VAL_PAD			0x0
+	#define SMII_PCLK_VAL_PLL2			0x1
+	#define SMII_PCLK_VAL_SYNTH0			0x2
+	#define SDHCI_PCLK_SHIFT			15
+	#define SDHCI_PCLK_MASK				1
+	#define SDHCI_PCLK_VAL_48M			0x0
+	#define SDHCI_PCLK_VAL_SYNTH3			0x1
+	#define I2S_REF_PCLK_SHIFT			8
+	#define I2S_REF_PCLK_MASK			1
+	#define I2S_REF_PCLK_SYNTH_VAL			0x1
+	#define I2S_REF_PCLK_PLL2_VAL			0x0
+	#define UART1_PCLK_SHIFT			6
+	#define UART1_PCLK_MASK				1
+	#define SPEAR320_UARTX_PCLK_VAL_SYNTH1		0x0
+	#define SPEAR320_UARTX_PCLK_VAL_APB		0x1
+
+static const char *i2s_ref_parents[] = { "ras_pll2_clk",
+	"ras_gen2_synth_gate_clk", };
+static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
+	"ras_gen3_synth_gate_clk",
+};
+static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
+	"ras_gen0_synth_gate_clk", };
+static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
+};
+
+static void __init spear320_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL,
+			CLK_IS_ROOT, 125000000);
+	clk_register_clkdev(clk, "smii_125m_pad", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+			1, 1);
+	clk_register_clkdev(clk, NULL, "90000000.clcd");
+
+	clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "emi", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "4c000000.flash");
+
+	clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a7000000.i2c");
+
+	clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "pwm", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a5000000.spi");
+
+	clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a6000000.spi");
+
+	clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+	clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+	clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "i2s");
+
+	clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents,
+			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG,
+			I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1,
+			4);
+	clk_register_clkdev(clk, "i2s_sclk", NULL);
+
+	clk = clk_register_mux(NULL, "rs485_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a9300000.serial");
+
+	clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents,
+			ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG,
+			SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+	clk = clk_register_mux(NULL, "smii_pclk", smii0_parents,
+			ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG,
+			SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "smii_pclk");
+
+	clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1);
+	clk_register_clkdev(clk, NULL, "smii");
+
+	clk = clk_register_mux(NULL, "uart1_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG,
+			UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "a3000000.serial");
+
+	clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a4000000.serial");
+
+	clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a9100000.serial");
+
+	clk = clk_register_mux(NULL, "uart4_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a9200000.serial");
+
+	clk = clk_register_mux(NULL, "uart5_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "60000000.serial");
+
+	clk = clk_register_mux(NULL, "uart6_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "60100000.serial");
+}
+#endif
+
+void __init spear3xx_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+			24000000);
+	clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+			PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+	/* clock derived from 24 MHz osc clk */
+	clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "fc880000.wdt");
+
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL,
+			"osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+			"osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+			HCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+			"pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+			ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
+			UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
+			PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+	clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+			"pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "firda_synth_clk", NULL);
+	clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+			ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+			FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+			PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "firda");
+
+	/* gpt clocks */
+	clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
+			ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
+			GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+			ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
+			GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+			ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+			GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	/* general synths clocks */
+	clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
+			"pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen0_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
+
+	clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
+			"pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen1_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+			ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
+			GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+
+	clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
+			"gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen2_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+
+	clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
+			"gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen3_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+
+	/* clock derived from pll3 clk */
+	clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "usbh_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "designware_udc");
+
+	/* clock derived from ahb clk */
+	clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+			1);
+	clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+			ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+			MCTR_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+			PCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG,
+			AMEM_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "amem_clk", NULL);
+
+	clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			C3_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "c3_clk");
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			DMA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			GMAC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "e0800000.eth");
+
+	clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			I2C_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0180000.i2c");
+
+	clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			JPEG_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "jpeg");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			SMI_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			ADC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "adc");
+
+	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			GPIO_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0100000.spi");
+
+	/* RAS clk enable */
+	clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB,
+			RAS_AHB_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB,
+			RAS_APB_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0,
+			RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_32k_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0,
+			RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_24m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0,
+			RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_pll1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+			RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+			RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
+			"gen0_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
+			"gen1_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
+			"gen2_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
+			"gen3_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT3_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+
+	if (of_machine_is_compatible("st,spear300"))
+		spear300_clk_init();
+	else if (of_machine_is_compatible("st,spear310"))
+		spear310_clk_init();
+	else if (of_machine_is_compatible("st,spear320"))
+		spear320_clk_init();
+}
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
new file mode 100644
index 00000000000..f9a20b38230
--- /dev/null
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -0,0 +1,342 @@
+/*
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR			(MISC_BASE + 0x008)
+#define PLL1_FRQ			(MISC_BASE + 0x00C)
+#define PLL2_CTR			(MISC_BASE + 0x014)
+#define PLL2_FRQ			(MISC_BASE + 0x018)
+#define PLL_CLK_CFG			(MISC_BASE + 0x020)
+	/* PLL_CLK_CFG register masks */
+	#define MCTR_CLK_SHIFT		28
+	#define MCTR_CLK_MASK		3
+
+#define CORE_CLK_CFG			(MISC_BASE + 0x024)
+	/* CORE CLK CFG register masks */
+	#define HCLK_RATIO_SHIFT	10
+	#define HCLK_RATIO_MASK		2
+	#define PCLK_RATIO_SHIFT	8
+	#define PCLK_RATIO_MASK		2
+
+#define PERIP_CLK_CFG			(MISC_BASE + 0x028)
+	/* PERIP_CLK_CFG register masks */
+	#define CLCD_CLK_SHIFT		2
+	#define CLCD_CLK_MASK		2
+	#define UART_CLK_SHIFT		4
+	#define UART_CLK_MASK		1
+	#define FIRDA_CLK_SHIFT		5
+	#define FIRDA_CLK_MASK		2
+	#define GPT0_CLK_SHIFT		8
+	#define GPT1_CLK_SHIFT		10
+	#define GPT2_CLK_SHIFT		11
+	#define GPT3_CLK_SHIFT		12
+	#define GPT_CLK_MASK		1
+
+#define PERIP1_CLK_ENB			(MISC_BASE + 0x02C)
+	/* PERIP1_CLK_ENB register masks */
+	#define UART0_CLK_ENB		3
+	#define UART1_CLK_ENB		4
+	#define SSP0_CLK_ENB		5
+	#define SSP1_CLK_ENB		6
+	#define I2C_CLK_ENB		7
+	#define JPEG_CLK_ENB		8
+	#define FSMC_CLK_ENB		9
+	#define FIRDA_CLK_ENB		10
+	#define GPT2_CLK_ENB		11
+	#define GPT3_CLK_ENB		12
+	#define GPIO2_CLK_ENB		13
+	#define SSP2_CLK_ENB		14
+	#define ADC_CLK_ENB		15
+	#define GPT1_CLK_ENB		11
+	#define RTC_CLK_ENB		17
+	#define GPIO1_CLK_ENB		18
+	#define DMA_CLK_ENB		19
+	#define SMI_CLK_ENB		21
+	#define CLCD_CLK_ENB		22
+	#define GMAC_CLK_ENB		23
+	#define USBD_CLK_ENB		24
+	#define USBH0_CLK_ENB		25
+	#define USBH1_CLK_ENB		26
+
+#define PRSC0_CLK_CFG			(MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG			(MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG			(MISC_BASE + 0x04C)
+
+#define CLCD_CLK_SYNT			(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT			(MISC_BASE + 0x060)
+#define UART_CLK_SYNT			(MISC_BASE + 0x064)
+
+/* vco rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	{.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */
+	{.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For PLL1 = 332 MHz */
+	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+	"pll2_clk", };
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+	/* For pll1 = 332 MHz */
+	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+	{.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+void __init spear6xx_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT,
+			30000000);
+	clk_register_clkdev(clk, "osc_30m_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0,
+			PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "rtc-spear");
+
+	/* clock derived from 30 MHz osc clk */
+	clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
+			0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+			"osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "wdt");
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+			HCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+			"pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
+			UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "uart_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
+			PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+	clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
+			PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0080000.serial");
+
+	clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+			"pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "firda_synth_clk", NULL);
+	clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+			ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+			FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+			PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "firda");
+
+	clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
+			"pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+	clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+			ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
+			CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+			PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "clcd");
+
+	/* gpt clocks */
+	clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+			ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+			GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+			ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+			GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+			ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+			GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+			ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
+			GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt3");
+
+	/* clock derived from pll3 clk */
+	clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "usbh.0_clk");
+
+	clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "usbh.1_clk");
+
+	clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "designware_udc");
+
+	/* clock derived from ahb clk */
+	clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+			1);
+	clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+			ARRAY_SIZE(ddr_parents),
+			0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+			PCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			DMA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+	clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			FSMC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d1800000.flash");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			GMAC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gmac");
+
+	clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			I2C_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0200000.i2c");
+
+	clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			JPEG_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "jpeg");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			SMI_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			ADC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "adc");
+
+	clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1);
+	clk_register_clkdev(clk, NULL, "f0100000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			GPIO1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			GPIO2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d8100000.gpio");
+
+	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "ssp-pl022.0");
+
+	clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "ssp-pl022.1");
+
+	clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "ssp-pl022.2");
+}