Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...

1 files changed, 14 insertions, 18 deletions

diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 37d23a0f8c5..3ab8294eab0 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -44,8 +44,9 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 {
 	struct cpufreq_freqs freqs;
 	struct opp *opp;
-	unsigned long freq_Hz, volt = 0, volt_old = 0, tol = 0;
-	unsigned int index, cpu;
+	unsigned long volt = 0, volt_old = 0, tol = 0;
+	long freq_Hz;
+	unsigned int index;
 	int ret;
 
 	ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
@@ -65,10 +66,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new)
 		return 0;
 
-	for_each_online_cpu(cpu) {
-		freqs.cpu = cpu;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	if (cpu_reg) {
 		rcu_read_lock();
@@ -76,7 +74,9 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			pr_err("failed to find OPP for %ld\n", freq_Hz);
-			return PTR_ERR(opp);
+			freqs.new = freqs.old;
+			ret = PTR_ERR(opp);
+			goto post_notify;
 		}
 		volt = opp_get_voltage(opp);
 		rcu_read_unlock();
@@ -94,7 +94,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 		if (ret) {
 			pr_err("failed to scale voltage up: %d\n", ret);
 			freqs.new = freqs.old;
-			return ret;
+			goto post_notify;
 		}
 	}
 
@@ -103,7 +103,8 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 		pr_err("failed to set clock rate: %d\n", ret);
 		if (cpu_reg)
 			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-		return ret;
+		freqs.new = freqs.old;
+		goto post_notify;
 	}
 
 	/* scaling down?  scale voltage after frequency */
@@ -113,25 +114,19 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 			pr_err("failed to scale voltage down: %d\n", ret);
 			clk_set_rate(cpu_clk, freqs.old * 1000);
 			freqs.new = freqs.old;
-			return ret;
 		}
 	}
 
-	for_each_online_cpu(cpu) {
-		freqs.cpu = cpu;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
+post_notify:
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
-	return 0;
+	return ret;
 }
 
 static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
 
-	if (policy->cpu != 0)
-		return -EINVAL;
-
 	ret = cpufreq_frequency_table_cpuinfo(policy, freq_table);
 	if (ret) {
 		pr_err("invalid frequency table: %d\n", ret);
@@ -262,6 +257,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
 	}
 
 	of_node_put(np);
+	of_node_put(parent);
 	return 0;
 
 out_free_table: