cpufreq: Give driver used for dbx500 family a more generic name

This driver doesn't only handle cpufreq functionality for the
db8500 anymore. There are new variants which rely on it too.
Let's make the name a bit more generic.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 179 deletions

diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
deleted file mode 100644
index 4f154bc0ebe..00000000000
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <mach/id.h>
-
-static struct cpufreq_frequency_table *freq_table;
-static struct clk *armss_clk;
-
-static struct freq_attr *db8500_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static int db8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static int db8500_cpufreq_target(struct cpufreq_policy *policy,
-				unsigned int target_freq,
-				unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	unsigned int idx;
-
-	/* scale the target frequency to one of the extremes supported */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target
-	    (policy, freq_table, target_freq, relation, &idx)) {
-		return -EINVAL;
-	}
-
-	freqs.old = policy->cur;
-	freqs.new = freq_table[idx].frequency;
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	/* pre-change notification */
-	for_each_cpu(freqs.cpu, policy->cpus)
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* update armss clk frequency */
-	if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) {
-		pr_err("db8500-cpufreq: Failed to update armss clk\n");
-		return -EINVAL;
-	}
-
-	/* post change notification */
-	for_each_cpu(freqs.cpu, policy->cpus)
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
-{
-	int i = 0;
-	unsigned long freq = clk_get_rate(armss_clk) / 1000;
-
-	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
-		if (freq <= freq_table[i].frequency)
-			return freq_table[i].frequency;
-		i++;
-	}
-
-	/* We could not find a corresponding frequency. */
-	pr_err("db8500-cpufreq: Failed to find cpufreq speed\n");
-	return 0;
-}
-
-static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int i = 0;
-	int res;
-
-	armss_clk = clk_get(NULL, "armss");
-	if (IS_ERR(armss_clk)) {
-		pr_err("db8500-cpufreq : Failed to get armss clk\n");
-		return PTR_ERR(armss_clk);
-	}
-
-	pr_info("db8500-cpufreq : Available frequencies:\n");
-	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
-		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
-		i++;
-	}
-
-	/* get policy fields based on the table */
-	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	if (!res)
-		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
-	else {
-		pr_err("db8500-cpufreq : Failed to read policy table\n");
-		clk_put(armss_clk);
-		return res;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = db8500_cpufreq_getspeed(policy->cpu);
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
-	/*
-	 * FIXME : Need to take time measurement across the target()
-	 *	   function with no/some/all drivers in the notification
-	 *	   list.
-	 */
-	policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */
-
-	/* policy sharing between dual CPUs */
-	cpumask_copy(policy->cpus, cpu_present_mask);
-
-	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-
-	return 0;
-}
-
-static struct cpufreq_driver db8500_cpufreq_driver = {
-	.flags  = CPUFREQ_STICKY,
-	.verify = db8500_cpufreq_verify_speed,
-	.target = db8500_cpufreq_target,
-	.get    = db8500_cpufreq_getspeed,
-	.init   = db8500_cpufreq_init,
-	.name   = "DB8500",
-	.attr   = db8500_cpufreq_attr,
-};
-
-static int db8500_cpufreq_probe(struct platform_device *pdev)
-{
-	freq_table = dev_get_platdata(&pdev->dev);
-
-	if (!freq_table) {
-		pr_err("db8500-cpufreq: Failed to fetch cpufreq table\n");
-		return -ENODEV;
-	}
-
-	return cpufreq_register_driver(&db8500_cpufreq_driver);
-}
-
-static struct platform_driver db8500_cpufreq_plat_driver = {
-	.driver = {
-		.name = "cpufreq-u8500",
-		.owner = THIS_MODULE,
-	},
-	.probe = db8500_cpufreq_probe,
-};
-
-static int __init db8500_cpufreq_register(void)
-{
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
-	pr_info("cpufreq for DB8500 started\n");
-	return platform_driver_register(&db8500_cpufreq_plat_driver);
-}
-device_initcall(db8500_cpufreq_register);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("cpufreq driver for DB8500");