summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-11 18:53:33 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-11 18:53:33 -0800
commit02d929502ce7b57f4835d8bb7c828d36e6d9e8ce (patch)
tree7bb0ca7a9bfe5c336c3125f823770934a2150ae4 /drivers/cpufreq
parentb24ca57e7625bc304e77bc429693ad32a691eb16 (diff)
parent6c523c614c13b84a3dc64f7a56d6855b03e6b292 (diff)
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (23 commits) [CPUFREQ] EXYNOS: Removed useless headers and codes [CPUFREQ] EXYNOS: Make EXYNOS common cpufreq driver [CPUFREQ] powernow-k8: Update copyright, maintainer and documentation information [CPUFREQ] powernow-k8: Fix indexing issue [CPUFREQ] powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB [CPUFREQ] update lpj only if frequency has changed [CPUFREQ] cpufreq:userspace: fix cpu_cur_freq updation [CPUFREQ] Remove wall variable from cpufreq_gov_dbs_init() [CPUFREQ] EXYNOS4210: cpufreq code is changed for stable working [CPUFREQ] EXYNOS4210: Update frequency table for cpu divider [CPUFREQ] EXYNOS4210: Remove code about bus on cpufreq [CPUFREQ] s3c64xx: Use pr_fmt() for consistent log messages cpufreq: OMAP: fixup for omap_device changes, include <linux/module.h> cpufreq: OMAP: fix freq_table leak cpufreq: OMAP: put clk if cpu_init failed cpufreq: OMAP: only supports OPP library cpufreq: OMAP: dont support !freq_table cpufreq: OMAP: deny initialization if no mpudev cpufreq: OMAP: move clk name decision to init cpufreq: OMAP: notify even with bad boot frequency ...
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig.arm15
-rw-r--r--drivers/cpufreq/Makefile2
-rw-r--r--drivers/cpufreq/cpufreq.c3
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c3
-rw-r--r--drivers/cpufreq/cpufreq_userspace.c8
-rw-r--r--drivers/cpufreq/exynos-cpufreq.c290
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c643
-rw-r--r--drivers/cpufreq/omap-cpufreq.c274
-rw-r--r--drivers/cpufreq/powernow-k8.c47
-rw-r--r--drivers/cpufreq/s3c64xx-cpufreq.c35
10 files changed, 765 insertions, 555 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 72a0044c1ba..e0664fed018 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -21,12 +21,19 @@ config ARM_S5PV210_CPUFREQ
If in doubt, say N.
+config ARM_EXYNOS_CPUFREQ
+ bool "SAMSUNG EXYNOS SoCs"
+ depends on ARCH_EXYNOS
+ select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210
+ default y
+ help
+ This adds the CPUFreq driver common part for Samsung
+ EXYNOS SoCs.
+
+ If in doubt, say N.
+
config ARM_EXYNOS4210_CPUFREQ
bool "Samsung EXYNOS4210"
- depends on CPU_EXYNOS4210
- default y
help
This adds the CPUFreq driver for Samsung EXYNOS4210
SoC (S5PV310 or S5PC210).
-
- If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index a48bc02cd76..ac000fa76bb 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -42,7 +42,9 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
+obj-$(CONFIG_ARCH_OMAP2PLUS) += omap-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8c2df3499da..622013fb789 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -204,8 +204,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
pr_debug("saving %lu as reference value for loops_per_jiffy; "
"freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
}
- if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
- (val == CPUFREQ_POSTCHANGE && ci->old > ci->new) ||
+ if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) ||
(val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
ci->new);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 3d679eee70a..c3e0652520a 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -713,11 +713,10 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
static int __init cpufreq_gov_dbs_init(void)
{
- cputime64_t wall;
u64 idle_time;
int cpu = get_cpu();
- idle_time = get_cpu_idle_time_us(cpu, &wall);
+ idle_time = get_cpu_idle_time_us(cpu, NULL);
put_cpu();
if (idle_time != -1ULL) {
/* Idle micro accounting is supported. Use finer thresholds */
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index f231015904c..bedac1aa9be 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -47,9 +47,11 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
if (!per_cpu(cpu_is_managed, freq->cpu))
return 0;
- pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n",
- freq->cpu, freq->new);
- per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
+ if (val == CPUFREQ_POSTCHANGE) {
+ pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n",
+ freq->cpu, freq->new);
+ per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
+ }
return 0;
}
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
new file mode 100644
index 00000000000..5467879ea07
--- /dev/null
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - CPU frequency scaling support for EXYNOS series
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/cpufreq.h>
+#include <linux/suspend.h>
+
+#include <mach/cpufreq.h>
+
+#include <plat/cpu.h>
+
+static struct exynos_dvfs_info *exynos_info;
+
+static struct regulator *arm_regulator;
+static struct cpufreq_freqs freqs;
+
+static unsigned int locking_frequency;
+static bool frequency_locked;
+static DEFINE_MUTEX(cpufreq_lock);
+
+int exynos_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy,
+ exynos_info->freq_table);
+}
+
+unsigned int exynos_getspeed(unsigned int cpu)
+{
+ return clk_get_rate(exynos_info->cpu_clk) / 1000;
+}
+
+static int exynos_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int index, old_index;
+ unsigned int arm_volt, safe_arm_volt = 0;
+ int ret = 0;
+ struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
+ unsigned int *volt_table = exynos_info->volt_table;
+ unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+
+ mutex_lock(&cpufreq_lock);
+
+ freqs.old = policy->cur;
+
+ if (frequency_locked && target_freq != locking_frequency) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ if (cpufreq_frequency_table_target(policy, freq_table,
+ freqs.old, relation, &old_index)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (cpufreq_frequency_table_target(policy, freq_table,
+ target_freq, relation, &index)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ freqs.new = freq_table[index].frequency;
+ freqs.cpu = policy->cpu;
+
+ /*
+ * ARM clock source will be changed APLL to MPLL temporary
+ * To support this level, need to control regulator for
+ * required voltage level
+ */
+ if (exynos_info->need_apll_change != NULL) {
+ if (exynos_info->need_apll_change(old_index, index) &&
+ (freq_table[index].frequency < mpll_freq_khz) &&
+ (freq_table[old_index].frequency < mpll_freq_khz))
+ safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
+ }
+ arm_volt = volt_table[index];
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* When the new frequency is higher than current frequency */
+ if ((freqs.new > freqs.old) && !safe_arm_volt) {
+ /* Firstly, voltage up to increase frequency */
+ regulator_set_voltage(arm_regulator, arm_volt,
+ arm_volt);
+ }
+
+ if (safe_arm_volt)
+ regulator_set_voltage(arm_regulator, safe_arm_volt,
+ safe_arm_volt);
+ if (freqs.new != freqs.old)
+ exynos_info->set_freq(old_index, index);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ /* When the new frequency is lower than current frequency */
+ if ((freqs.new < freqs.old) ||
+ ((freqs.new > freqs.old) && safe_arm_volt)) {
+ /* down the voltage after frequency change */
+ regulator_set_voltage(arm_regulator, arm_volt,
+ arm_volt);
+ }
+
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+
+static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+#endif
+
+/**
+ * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
+ * context
+ * @notifier
+ * @pm_event
+ * @v
+ *
+ * While frequency_locked == true, target() ignores every frequency but
+ * locking_frequency. The locking_frequency value is the initial frequency,
+ * which is set by the bootloader. In order to eliminate possible
+ * inconsistency in clock values, we save and restore frequencies during
+ * suspend and resume and block CPUFREQ activities. Note that the standard
+ * suspend/resume cannot be used as they are too deep (syscore_ops) for
+ * regulator actions.
+ */
+static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *v)
+{
+ struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+ static unsigned int saved_frequency;
+ unsigned int temp;
+
+ mutex_lock(&cpufreq_lock);
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ if (frequency_locked)
+ goto out;
+
+ frequency_locked = true;
+
+ if (locking_frequency) {
+ saved_frequency = exynos_getspeed(0);
+
+ mutex_unlock(&cpufreq_lock);
+ exynos_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+ }
+ break;
+
+ case PM_POST_SUSPEND:
+ if (saved_frequency) {
+ /*
+ * While frequency_locked, only locking_frequency
+ * is valid for target(). In order to use
+ * saved_frequency while keeping frequency_locked,
+ * we temporarly overwrite locking_frequency.
+ */
+ temp = locking_frequency;
+ locking_frequency = saved_frequency;
+
+ mutex_unlock(&cpufreq_lock);
+ exynos_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+
+ locking_frequency = temp;
+ }
+ frequency_locked = false;
+ break;
+ }
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block exynos_cpufreq_nb = {
+ .notifier_call = exynos_cpufreq_pm_notifier,
+};
+
+static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu);
+
+ cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
+
+ /* set the transition latency value */
+ policy->cpuinfo.transition_latency = 100000;
+
+ /*
+ * EXYNOS4 multi-core processors has 2 cores
+ * that the frequency cannot be set independently.
+ * Each cpu is bound to the same speed.
+ * So the affected cpu is all of the cpus.
+ */
+ if (num_online_cpus() == 1) {
+ cpumask_copy(policy->related_cpus, cpu_possible_mask);
+ cpumask_copy(policy->cpus, cpu_online_mask);
+ } else {
+ cpumask_setall(policy->cpus);
+ }
+
+ return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
+}
+
+static struct cpufreq_driver exynos_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = exynos_verify_speed,
+ .target = exynos_target,
+ .get = exynos_getspeed,
+ .init = exynos_cpufreq_cpu_init,
+ .name = "exynos_cpufreq",
+#ifdef CONFIG_PM
+ .suspend = exynos_cpufreq_suspend,
+ .resume = exynos_cpufreq_resume,
+#endif
+};
+
+static int __init exynos_cpufreq_init(void)
+{
+ int ret = -EINVAL;
+
+ exynos_info = kzalloc(sizeof(struct exynos_dvfs_info), GFP_KERNEL);
+ if (!exynos_info)
+ return -ENOMEM;
+
+ if (soc_is_exynos4210())
+ ret = exynos4210_cpufreq_init(exynos_info);
+ else
+ pr_err("%s: CPU type not found\n", __func__);
+
+ if (ret)
+ goto err_vdd_arm;
+
+ if (exynos_info->set_freq == NULL) {
+ pr_err("%s: No set_freq function (ERR)\n", __func__);
+ goto err_vdd_arm;
+ }
+
+ arm_regulator = regulator_get(NULL, "vdd_arm");
+ if (IS_ERR(arm_regulator)) {
+ pr_err("%s: failed to get resource vdd_arm\n", __func__);
+ goto err_vdd_arm;
+ }
+
+ register_pm_notifier(&exynos_cpufreq_nb);
+
+ if (cpufreq_register_driver(&exynos_driver)) {
+ pr_err("%s: failed to register cpufreq driver\n", __func__);
+ goto err_cpufreq;
+ }
+
+ return 0;
+err_cpufreq:
+ unregister_pm_notifier(&exynos_cpufreq_nb);
+
+ if (!IS_ERR(arm_regulator))
+ regulator_put(arm_regulator);
+err_vdd_arm:
+ kfree(exynos_info);
+ pr_debug("%s: failed initialization\n", __func__);
+ return -EINVAL;
+}
+late_initcall(exynos_cpufreq_init);
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index ab9741fab92..065da5b702f 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -2,61 +2,52 @@
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - CPU frequency scaling support
+ * EXYNOS4210 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/types.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
-#include <linux/notifier.h>
-#include <linux/suspend.h>
-#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
+#include <mach/cpufreq.h>
-#include <plat/clock.h>
-#include <plat/pm.h>
+#define CPUFREQ_LEVEL_END L5
+
+static int max_support_idx = L0;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
-static struct regulator *arm_regulator;
-static struct regulator *int_regulator;
-
-static struct cpufreq_freqs freqs;
-static unsigned int memtype;
-
-static unsigned int locking_frequency;
-static bool frequency_locked;
-static DEFINE_MUTEX(cpufreq_lock);
-
-enum exynos4_memory_type {
- DDR2 = 4,
- LPDDR2,
- DDR3,
+struct cpufreq_clkdiv {
+ unsigned int index;
+ unsigned int clkdiv;
};
-enum cpufreq_level_index {
- L0, L1, L2, L3, CPUFREQ_LEVEL_END,
+static unsigned int exynos4210_volt_table[CPUFREQ_LEVEL_END] = {
+ 1250000, 1150000, 1050000, 975000, 950000,
};
-static struct cpufreq_frequency_table exynos4_freq_table[] = {
- {L0, 1000*1000},
- {L1, 800*1000},
- {L2, 400*1000},
- {L3, 100*1000},
+
+static struct cpufreq_clkdiv exynos4210_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos4210_freq_table[] = {
+ {L0, 1200*1000},
+ {L1, 1000*1000},
+ {L2, 800*1000},
+ {L3, 500*1000},
+ {L4, 200*1000},
{0, CPUFREQ_TABLE_END},
};
@@ -67,17 +58,20 @@ static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = {
* DIVATB, DIVPCLK_DBG, DIVAPLL }
*/
- /* ARM L0: 1000MHz */
- { 0, 3, 7, 3, 3, 0, 1 },
+ /* ARM L0: 1200MHz */
+ { 0, 3, 7, 3, 4, 1, 7 },
- /* ARM L1: 800MHz */
- { 0, 3, 7, 3, 3, 0, 1 },
+ /* ARM L1: 1000MHz */
+ { 0, 3, 7, 3, 4, 1, 7 },
- /* ARM L2: 400MHz */
- { 0, 1, 3, 1, 3, 0, 1 },
+ /* ARM L2: 800MHz */
+ { 0, 3, 7, 3, 3, 1, 7 },
- /* ARM L3: 100MHz */
- { 0, 0, 1, 0, 3, 1, 1 },
+ /* ARM L3: 500MHz */
+ { 0, 3, 7, 3, 3, 1, 7 },
+
+ /* ARM L4: 200MHz */
+ { 0, 1, 3, 1, 3, 1, 0 },
};
static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
@@ -86,147 +80,46 @@ static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
* { DIVCOPY, DIVHPM }
*/
- /* ARM L0: 1000MHz */
- { 3, 0 },
+ /* ARM L0: 1200MHz */
+ { 5, 0 },
- /* ARM L1: 800MHz */
- { 3, 0 },
+ /* ARM L1: 1000MHz */
+ { 4, 0 },
- /* ARM L2: 400MHz */
+ /* ARM L2: 800MHz */
{ 3, 0 },
- /* ARM L3: 100MHz */
+ /* ARM L3: 500MHz */
{ 3, 0 },
-};
-
-static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = {
- /*
- * Clock divider value for following
- * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
- * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
- */
-
- /* DMC L0: 400MHz */
- { 3, 1, 1, 1, 1, 1, 3, 1 },
-
- /* DMC L1: 400MHz */
- { 3, 1, 1, 1, 1, 1, 3, 1 },
-
- /* DMC L2: 266.7MHz */
- { 7, 1, 1, 2, 1, 1, 3, 1 },
-
- /* DMC L3: 200MHz */
- { 7, 1, 1, 3, 1, 1, 3, 1 },
-};
-
-static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = {
- /*
- * Clock divider value for following
- * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
- */
- /* ACLK200 L0: 200MHz */
- { 3, 7, 4, 5, 1 },
-
- /* ACLK200 L1: 200MHz */
- { 3, 7, 4, 5, 1 },
-
- /* ACLK200 L2: 160MHz */
- { 4, 7, 5, 7, 1 },
-
- /* ACLK200 L3: 133.3MHz */
- { 5, 7, 7, 7, 1 },
-};
-
-static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = {
- /*
- * Clock divider value for following
- * { DIVGDL/R, DIVGPL/R }
- */
-
- /* ACLK_GDL/R L0: 200MHz */
- { 3, 1 },
-
- /* ACLK_GDL/R L1: 200MHz */
- { 3, 1 },
-
- /* ACLK_GDL/R L2: 160MHz */
- { 4, 1 },
-
- /* ACLK_GDL/R L3: 133.3MHz */
- { 5, 1 },
-};
-
-struct cpufreq_voltage_table {
- unsigned int index; /* any */
- unsigned int arm_volt; /* uV */
- unsigned int int_volt;
+ /* ARM L4: 200MHz */
+ { 3, 0 },
};
-static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = {
- {
- .index = L0,
- .arm_volt = 1200000,
- .int_volt = 1100000,
- }, {
- .index = L1,
- .arm_volt = 1100000,
- .int_volt = 1100000,
- }, {
- .index = L2,
- .arm_volt = 1000000,
- .int_volt = 1000000,
- }, {
- .index = L3,
- .arm_volt = 900000,
- .int_volt = 1000000,
- },
-};
+static unsigned int exynos4210_apll_pms_table[CPUFREQ_LEVEL_END] = {
+ /* APLL FOUT L0: 1200MHz */
+ ((150 << 16) | (3 << 8) | 1),
-static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = {
- /* APLL FOUT L0: 1000MHz */
+ /* APLL FOUT L1: 1000MHz */
((250 << 16) | (6 << 8) | 1),
- /* APLL FOUT L1: 800MHz */
+ /* APLL FOUT L2: 800MHz */
((200 << 16) | (6 << 8) | 1),
- /* APLL FOUT L2 : 400MHz */
- ((200 << 16) | (6 << 8) | 2),
+ /* APLL FOUT L3: 500MHz */
+ ((250 << 16) | (6 << 8) | 2),
- /* APLL FOUT L3: 100MHz */
- ((200 << 16) | (6 << 8) | 4),
+ /* APLL FOUT L4: 200MHz */
+ ((200 << 16) | (6 << 8) | 3),
};
-static int exynos4_verify_speed(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, exynos4_freq_table);
-}
-
-static unsigned int exynos4_getspeed(unsigned int cpu)
-{
- return clk_get_rate(cpu_clk) / 1000;
-}
-
-static void exynos4_set_clkdiv(unsigned int div_index)
+static void exynos4210_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
/* Change Divider - CPU0 */
- tmp = __raw_readl(S5P_CLKDIV_CPU);
-
- tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK |
- S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK |
- S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK |
- S5P_CLKDIV_CPU0_APLL_MASK);
-
- tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
- (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
- (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
- (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
- (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
- (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
- (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
+ tmp = exynos4210_clkdiv_table[div_index].clkdiv;
__raw_writel(tmp, S5P_CLKDIV_CPU);
@@ -248,83 +141,9 @@ static void exynos4_set_clkdiv(unsigned int div_index)
do {
tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
} while (tmp & 0x11);
-
- /* Change Divider - DMC0 */
-
- tmp = __raw_readl(S5P_CLKDIV_DMC0);
-
- tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK |
- S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK |
- S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK |
- S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK);
-
- tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) |
- (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
- (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) |
- (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) |
- (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) |
- (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) |
- (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) |
- (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT));
-
- __raw_writel(tmp, S5P_CLKDIV_DMC0);
-
- do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
- } while (tmp & 0x11111111);
-
- /* Change Divider - TOP */
-
- tmp = __raw_readl(S5P_CLKDIV_TOP);
-
- tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK |
- S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK |
- S5P_CLKDIV_TOP_ONENAND_MASK);
-
- tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) |
- (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) |
- (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) |
- (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) |
- (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT));
-
- __raw_writel(tmp, S5P_CLKDIV_TOP);
-
- do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
- } while (tmp & 0x11111);
-
- /* Change Divider - LEFTBUS */
-
- tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
-
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
- (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
-
- do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - RIGHTBUS */
-
- tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
-
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
- (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
-
- do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
- } while (tmp & 0x11);
}
-static void exynos4_set_apll(unsigned int index)
+static void exynos4210_set_apll(unsigned int index)
{
unsigned int tmp;
@@ -343,7 +162,7 @@ static void exynos4_set_apll(unsigned int index)
/* 3. Change PLL PMS values */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= exynos4_apll_pms_table[index];
+ tmp |= exynos4210_apll_pms_table[index];
__raw_writel(tmp, S5P_APLL_CON0);
/* 4. wait_lock_time */
@@ -360,328 +179,126 @@ static void exynos4_set_apll(unsigned int index)
} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
}
-static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index)
+bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
+{
+ unsigned int old_pm = (exynos4210_apll_pms_table[old_index] >> 8);
+ unsigned int new_pm = (exynos4210_apll_pms_table[new_index] >> 8);
+
+ return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos4210_set_frequency(unsigned int old_index,
+ unsigned int new_index)
{
unsigned int tmp;
if (old_index > new_index) {
- /* The frequency changing to L0 needs to change apll */
- if (freqs.new == exynos4_freq_table[L0].frequency) {
- /* 1. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
-
- /* 2. Change the apll m,p,s value */
- exynos4_set_apll(new_index);
- } else {
+ if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
+ exynos4210_set_clkdiv(new_index);
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
+ tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
- }
- }
-
- else if (old_index < new_index) {
- /* The frequency changing from L0 needs to change apll */
- if (freqs.old == exynos4_freq_table[L0].frequency) {
- /* 1. Change the apll m,p,s value */
- exynos4_set_apll(new_index);
-
- /* 2. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
} else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the system clock divider values */
+ exynos4210_set_clkdiv(new_index);
+ /* 2. Change the apll m,p,s value */
+ exynos4210_set_apll(new_index);
+ }
+ } else if (old_index < new_index) {
+ if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
+ tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
/* 2. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
+ exynos4210_set_clkdiv(new_index);
+ } else {
+ /* Clock Configuration Procedure */
+ /* 1. Change the apll m,p,s value */
+ exynos4210_set_apll(new_index);
+ /* 2. Change the system clock divider values */
+ exynos4210_set_clkdiv(new_index);
}
}
}
-static int exynos4_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int index, old_index;
- unsigned int arm_volt, int_volt;
- int err = -EINVAL;
-
- freqs.old = exynos4_getspeed(policy->cpu);
-
- mutex_lock(&cpufreq_lock);
-
- if (frequency_locked && target_freq != locking_frequency) {
- err = -EAGAIN;
- goto out;
- }
-
- if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
- freqs.old, relation, &old_index))
- goto out;
-
- if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
- target_freq, relation, &index))
- goto out;
-
- err = 0;
-
- freqs.new = exynos4_freq_table[index].frequency;
- freqs.cpu = policy->cpu;
-
- if (freqs.new == freqs.old)
- goto out;
-
- /* get the voltage value */
- arm_volt = exynos4_volt_table[index].arm_volt;
- int_volt = exynos4_volt_table[index].int_volt;
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- /* control regulator */
- if (freqs.new > freqs.old) {
- /* Voltage up */
- regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- regulator_set_voltage(int_regulator, int_volt, int_volt);
- }
-
- /* Clock Configuration Procedure */
- exynos4_set_frequency(old_index, index);
-
- /* control regulator */
- if (freqs.new < freqs.old) {
- /* Voltage down */
- regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- regulator_set_voltage(int_regulator, int_volt, int_volt);
- }
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-out:
- mutex_unlock(&cpufreq_lock);
- return err;
-}
-
-#ifdef CONFIG_PM
-/*
- * These suspend/resume are used as syscore_ops, it is already too
- * late to set regulator voltages at this stage.
- */
-static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
-{
- return 0;
-}
-
-static int exynos4_cpufreq_resume(struct cpufreq_policy *policy)
+int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
{
- return 0;
-}
-#endif
-
-/**
- * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
- * context
- * @notifier
- * @pm_event
- * @v
- *
- * While frequency_locked == true, target() ignores every frequency but
- * locking_frequency. The locking_frequency value is the initial frequency,
- * which is set by the bootloader. In order to eliminate possible
- * inconsistency in clock values, we save and restore frequencies during
- * suspend and resume and block CPUFREQ activities. Note that the standard
- * suspend/resume cannot be used as they are too deep (syscore_ops) for
- * regulator actions.
- */
-static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier,
- unsigned long pm_event, void *v)
-{
- struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
- static unsigned int saved_frequency;
- unsigned int temp;
-
- mutex_lock(&cpufreq_lock);
- switch (pm_event) {
- case PM_SUSPEND_PREPARE:
- if (frequency_locked)
- goto out;
- frequency_locked = true;
-
- if (locking_frequency) {
- saved_frequency = exynos4_getspeed(0);
-
- mutex_unlock(&cpufreq_lock);
- exynos4_target(policy, locking_frequency,
- CPUFREQ_RELATION_H);
- mutex_lock(&cpufreq_lock);
- }
-
- break;
- case PM_POST_SUSPEND:
-
- if (saved_frequency) {
- /*
- * While frequency_locked, only locking_frequency
- * is valid for target(). In order to use
- * saved_frequency while keeping frequency_locked,
- * we temporarly overwrite locking_frequency.
- */
- temp = locking_frequency;
- locking_frequency = saved_frequency;
-
- mutex_unlock(&cpufreq_lock);
- exynos4_target(policy, locking_frequency,
- CPUFREQ_RELATION_H);
- mutex_lock(&cpufreq_lock);
-
- locking_frequency = temp;
- }
-
- frequency_locked = false;
- break;
- }
-out:
- mutex_unlock(&cpufreq_lock);
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block exynos4_cpufreq_nb = {
- .notifier_call = exynos4_cpufreq_pm_notifier,
-};
-
-static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- int ret;
-
- policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
-
- cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
-
- /* set the transition latency value */
- policy->cpuinfo.transition_latency = 100000;
-
- /*
- * EXYNOS4 multi-core processors has 2 cores
- * that the frequency cannot be set independently.
- * Each cpu is bound to the same speed.
- * So the affected cpu is all of the cpus.
- */
- cpumask_setall(policy->cpus);
-
- ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
- if (ret)
- return ret;
-
- cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
-
- return 0;
-}
-
-static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
- return 0;
-}
-
-static struct freq_attr *exynos4_cpufreq_attr[] = {
- &cpufreq_freq_attr_scaling_available_freqs,
- NULL,
-};
-
-static struct cpufreq_driver exynos4_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = exynos4_verify_speed,
- .target = exynos4_target,
- .get = exynos4_getspeed,
- .init = exynos4_cpufreq_cpu_init,
- .exit = exynos4_cpufreq_cpu_exit,
- .name = "exynos4_cpufreq",
- .attr = exynos4_cpufreq_attr,
-#ifdef CONFIG_PM
- .suspend = exynos4_cpufreq_suspend,
- .resume = exynos4_cpufreq_resume,
-#endif
-};
+ int i;
+ unsigned int tmp;
+ unsigned long rate;
-static int __init exynos4_cpufreq_init(void)
-{
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
- locking_frequency = exynos4_getspeed(0);
-
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
- goto out;
+ goto err_moutcore;
mout_mpll = clk_get(NULL, "mout_mpll");
if (IS_ERR(mout_mpll))
- goto out;
+ goto err_mout_mpll;
+
+ rate = clk_get_rate(mout_mpll) / 1000;
mout_apll = clk_get(NULL, "mout_apll");
if (IS_ERR(mout_apll))
- goto out;
+ goto err_mout_apll;
- arm_regulator = regulator_get(NULL, "vdd_arm");
- if (IS_ERR(arm_regulator)) {
- printk(KERN_ERR "failed to get resource %s\n", "vdd_arm");
- goto out;
- }
+ tmp = __raw_readl(S5P_CLKDIV_CPU);
- int_regulator = regulator_get(NULL, "vdd_int");
- if (IS_ERR(int_regulator)) {
- printk(KERN_ERR "failed to get resource %s\n", "vdd_int");
- goto out;
+ for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
+ tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK |
+ S5P_CLKDIV_CPU0_COREM0_MASK |
+ S5P_CLKDIV_CPU0_COREM1_MASK |
+ S5P_CLKDIV_CPU0_PERIPH_MASK |
+ S5P_CLKDIV_CPU0_ATB_MASK |
+ S5P_CLKDIV_CPU0_PCLKDBG_MASK |
+ S5P_CLKDIV_CPU0_APLL_MASK);
+
+ tmp |= ((clkdiv_cpu0[i][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
+ (clkdiv_cpu0[i][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
+ (clkdiv_cpu0[i][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
+ (clkdiv_cpu0[i][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
+ (clkdiv_cpu0[i][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
+ (clkdiv_cpu0[i][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+ (clkdiv_cpu0[i][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
+
+ exynos4210_clkdiv_table[i].clkdiv = tmp;
}
- /*
- * Check DRAM type.
- * Because DVFS level is different according to DRAM type.
- */
- memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET);
- memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT);
- memtype &= S5P_DMC0_MEMTYPE_MASK;
-
- if ((memtype < DDR2) && (memtype > DDR3)) {
- printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype);
- goto out;
- } else {
- printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
- }
-
- register_pm_notifier(&exynos4_cpufreq_nb);
-
- return cpufreq_register_driver(&exynos4_driver);
-
-out:
- if (!IS_ERR(cpu_clk))
- clk_put(cpu_clk);
+ info->mpll_freq_khz = rate;
+ info->pm_lock_idx = L2;
+ info->pll_safe_idx = L2;
+ info->max_support_idx = max_support_idx;
+ info->min_support_idx = min_support_idx;
+ info->cpu_clk = cpu_clk;
+ info->volt_table = exynos4210_volt_table;
+ info->freq_table = exynos4210_freq_table;
+ info->set_freq = exynos4210_set_frequency;
+ info->need_apll_change = exynos4210_pms_change;
- if (!IS_ERR(moutcore))
- clk_put(moutcore);
+ return 0;
+err_mout_apll:
if (!IS_ERR(mout_mpll))
clk_put(mout_mpll);
+err_mout_mpll:
+ if (!IS_ERR(moutcore))
+ clk_put(moutcore);
+err_moutcore:
+ if (!IS_ERR(cpu_clk))
+ clk_put(cpu_clk);
- if (!IS_ERR(mout_apll))
- clk_put(mout_apll);
-
- if (!IS_ERR(arm_regulator))
- regulator_put(arm_regulator);
-
- if (!IS_ERR(int_regulator))
- regulator_put(int_regulator);
-
- printk(KERN_ERR "%s: failed initialization\n", __func__);
-
+ pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
-late_initcall(exynos4_cpufreq_init);
+EXPORT_SYMBOL(exynos4210_cpufreq_init);
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
new file mode 100644
index 00000000000..5d04c57aae3
--- /dev/null
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -0,0 +1,274 @@
+/*
+ * CPU frequency scaling for OMAP using OPP information
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2011 Texas Instruments, Inc.
+ * - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/opp.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/smp_plat.h>
+#include <asm/cpu.h>
+
+#include <plat/clock.h>
+#include <plat/omap-pm.h>
+#include <plat/common.h>
+#include <plat/omap_device.h>
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_SMP
+struct lpj_info {
+ unsigned long ref;
+ unsigned int freq;
+};
+
+static DEFINE_PER_CPU(struct lpj_info, lpj_ref);
+static struct lpj_info global_lpj_ref;
+#endif
+
+static struct cpufreq_frequency_table *freq_table;
+static atomic_t freq_table_users = ATOMIC_INIT(0);
+static struct clk *mpu_clk;
+static char *mpu_clk_name;
+static struct device *mpu_dev;
+
+static int omap_verify_speed(struct cpufreq_policy *policy)
+{
+ if (!freq_table)
+ return -EINVAL;
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static unsigned int omap_getspeed(unsigned int cpu)
+{
+ unsigned long rate;
+
+ if (cpu >= NR_CPUS)
+ return 0;
+
+ rate = clk_get_rate(mpu_clk) / 1000;
+ return rate;
+}
+
+static int omap_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int i;
+ int ret = 0;
+ struct cpufreq_freqs freqs;
+
+ if (!freq_table) {
+ dev_err(mpu_dev, "%s: cpu%d: no freq table!\n", __func__,
+ policy->cpu);
+ return -EINVAL;
+ }
+
+ ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
+ relation, &i);
+ if (ret) {
+ dev_dbg(mpu_dev, "%s: cpu%d: no freq match for %d(ret=%d)\n",
+ __func__, policy->cpu, target_freq, ret);
+ return ret;
+ }
+ freqs.new = freq_table[i].frequency;
+ if (!freqs.new) {
+ dev_err(mpu_dev, "%s: cpu%d: no match for freq %d\n", __func__,
+ policy->cpu, target_freq);
+ return -EINVAL;
+ }
+
+ freqs.old = omap_getspeed(policy->cpu);
+ freqs.cpu = policy->cpu;
+
+ if (freqs.old == freqs.new && policy->cur == freqs.new)
+ return ret;
+
+ /* notifiers */
+ for_each_cpu(i, policy->cpus) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+ pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, freqs.new);
+#endif
+
+ ret = clk_set_rate(mpu_clk, freqs.new * 1000);
+ freqs.new = omap_getspeed(policy->cpu);
+
+#ifdef CONFIG_SMP
+ /*
+ * Note that loops_per_jiffy is not updated on SMP systems in
+ * cpufreq driver. So, update the per-CPU loops_per_jiffy value
+ * on frequency transition. We need to update all dependent CPUs.
+ */
+ for_each_cpu(i, policy->cpus) {
+ struct lpj_info *lpj = &per_cpu(lpj_ref, i);
+ if (!lpj->freq) {
+ lpj->ref = per_cpu(cpu_data, i).loops_per_jiffy;
+ lpj->freq = freqs.old;
+ }
+
+ per_cpu(cpu_data, i).loops_per_jiffy =
+ cpufreq_scale(lpj->ref, lpj->freq, freqs.new);
+ }
+
+ /* And don't forget to adjust the global one */
+ if (!global_lpj_ref.freq) {
+ global_lpj_ref.ref = loops_per_jiffy;
+ global_lpj_ref.freq = freqs.old;
+ }
+ loops_per_jiffy = cpufreq_scale(global_lpj_ref.ref, global_lpj_ref.freq,
+ freqs.new);
+#endif
+
+ /* notifiers */
+ for_each_cpu(i, policy->cpus) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+
+ return ret;
+}
+
+static inline void freq_table_free(void)
+{
+ if (atomic_dec_and_test(&freq_table_users))
+ opp_free_cpufreq_table(mpu_dev, &freq_table);
+}
+
+static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy)
+{
+ int result = 0;
+
+ mpu_clk = clk_get(NULL, mpu_clk_name);
+ if (IS_ERR(mpu_clk))
+ return PTR_ERR(mpu_clk);
+
+ if (policy->cpu >= NR_CPUS) {
+ result = -EINVAL;
+ goto fail_ck;
+ }
+
+ policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu);
+
+ if (atomic_inc_return(&freq_table_users) == 1)
+ result = opp_init_cpufreq_table(mpu_dev, &freq_table);
+
+ if (result) {
+ dev_err(mpu_dev, "%s: cpu%d: failed creating freq table[%d]\n",
+ __func__, policy->cpu, result);
+ goto fail_ck;
+ }
+
+ result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (result)
+ goto fail_table;
+
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->cur = omap_getspeed(policy->cpu);
+
+ /*
+ * On OMAP SMP configuartion, both processors share the voltage
+ * and clock. So both CPUs needs to be scaled together and hence
+ * needs software co-ordination. Use cpufreq affected_cpus
+ * interface to handle this scenario. Additional is_smp() check
+ * is to keep SMP_ON_UP build working.
+ */
+ if (is_smp()) {
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
+ cpumask_setall(policy->cpus);
+ }
+
+ /* FIXME: what's the actual transition time? */
+ policy->cpuinfo.transition_latency = 300 * 1000;
+
+ return 0;
+
+fail_table:
+ freq_table_free();
+fail_ck:
+ clk_put(mpu_clk);
+ return result;
+}
+
+static int omap_cpu_exit(struct cpufreq_policy *policy)
+{
+ freq_table_free();
+ clk_put(mpu_clk);
+ return 0;
+}
+
+static struct freq_attr *omap_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver omap_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = omap_verify_speed,
+ .target = omap_target,
+ .get = omap_getspeed,
+ .init = omap_cpu_init,
+ .exit = omap_cpu_exit,
+ .name = "omap",
+ .attr = omap_cpufreq_attr,
+};
+
+static int __init omap_cpufreq_init(void)
+{
+ if (cpu_is_omap24xx())
+ mpu_clk_name = "virt_prcm_set";
+ else if (cpu_is_omap34xx())
+ mpu_clk_name = "dpll1_ck";
+ else if (cpu_is_omap44xx())
+ mpu_clk_name = "dpll_mpu_ck";
+
+ if (!mpu_clk_name) {
+ pr_err("%s: unsupported Silicon?\n", __func__);
+ return -EINVAL;
+ }
+
+ mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ if (!mpu_dev) {
+ pr_warning("%s: unable to get the mpu device\n", __func__);
+ return -EINVAL;
+ }
+
+ return cpufreq_register_driver(&omap_driver);
+}
+
+static void __exit omap_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&omap_driver);
+}
+
+MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
+MODULE_LICENSE("GPL");
+module_init(omap_cpufreq_init);
+module_exit(omap_cpufreq_exit);
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index bce576d7478..8f9b2ceeec8 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1,10 +1,11 @@
/*
- * (c) 2003-2010 Advanced Micro Devices, Inc.
+ * (c) 2003-2012 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
- * Support : mark.langsdorf@amd.com
+ * Maintainer:
+ * Andreas Herrmann <andreas.herrmann3@amd.com>
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones on behalf of SuSE Labs
@@ -16,12 +17,14 @@
* Valuable input gratefully received from Dave Jones, Pavel Machek,
* Dominik Brodowski, Jacob Shin, and others.
* Originally developed by Paul Devriendt.
- * Processor information obtained from Chapter 9 (Power and Thermal Management)
- * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
- * Opteron Processors" available for download from www.amd.com
*
- * Tables for specific CPUs can be inferred from
- * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ * Processor information obtained from Chapter 9 (Power and Thermal
+ * Management) of the "BIOS and Kernel Developer's Guide (BKDG) for
+ * the AMD Athlon 64 and AMD Opteron Processors" and section "2.x
+ * Power Management" in BKDGs for newer AMD CPU families.
+ *
+ * Tables for specific CPUs can be inferred from AMD's processor
+ * power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf)
*/
#include <linux/kernel.h>
@@ -54,6 +57,9 @@ static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
static int cpu_family = CPU_OPTERON;
+/* array to map SW pstate number to acpi state */
+static u32 ps_to_as[8];
+
/* core performance boost */
static bool cpb_capable, cpb_enabled;
static struct msr __percpu *msrs;
@@ -80,9 +86,9 @@ static u32 find_khz_freq_from_fid(u32 fid)
}
static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data,
- u32 pstate)
+ u32 pstate)
{
- return data[pstate].frequency;
+ return data[ps_to_as[pstate]].frequency;
}
/* Return the vco fid for an input fid
@@ -926,23 +932,27 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
invalidate_entry(powernow_table, i);
continue;
}
- rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
- if (!(hi & HW_PSTATE_VALID_MASK)) {
- pr_debug("invalid pstate %d, ignoring\n", index);
- invalidate_entry(powernow_table, i);
- continue;
- }
- powernow_table[i].index = index;
+ ps_to_as[index] = i;
/* Frequency may be rounded for these */
if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
|| boot_cpu_data.x86 == 0x11) {
+
+ rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
+ if (!(hi & HW_PSTATE_VALID_MASK)) {
+ pr_debug("invalid pstate %d, ignoring\n", index);
+ invalidate_entry(powernow_table, i);
+ continue;
+ }
+
powernow_table[i].frequency =
freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
} else
powernow_table[i].frequency =
data->acpi_data.states[i].core_frequency * 1000;
+
+ powernow_table[i].index = index;
}
return 0;
}
@@ -1189,7 +1199,8 @@ static int powernowk8_target(struct cpufreq_policy *pol,
powernow_k8_acpi_pst_values(data, newstate);
if (cpu_family == CPU_HW_PSTATE)
- ret = transition_frequency_pstate(data, newstate);
+ ret = transition_frequency_pstate(data,
+ data->powernow_table[newstate].index);
else
ret = transition_frequency_fidvid(data, newstate);
if (ret) {
@@ -1202,7 +1213,7 @@ static int powernowk8_target(struct cpufreq_policy *pol,
if (cpu_family == CPU_HW_PSTATE)
pol->cur = find_khz_freq_from_pstate(data->powernow_table,
- newstate);
+ data->powernow_table[newstate].index);
else
pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index 3475f65aeec..a5e72cb5f53 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -8,6 +8,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "cpufreq: " fmt
+
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -91,7 +93,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
if (freqs.old == freqs.new)
return 0;
- pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+ pr_debug("Transition %d-%dkHz\n", freqs.old, freqs.new);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -101,7 +103,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
- pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
+ pr_err("Failed to set VDDARM for %dkHz: %d\n",
freqs.new, ret);
goto err;
}
@@ -110,7 +112,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
ret = clk_set_rate(armclk, freqs.new * 1000);
if (ret < 0) {
- pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
+ pr_err("Failed to set rate %dkHz: %d\n",
freqs.new, ret);
goto err;
}
@@ -123,14 +125,14 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
- pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
+ pr_err("Failed to set VDDARM for %dkHz: %d\n",
freqs.new, ret);
goto err_clk;
}
}
#endif
- pr_debug("cpufreq: Set actual frequency %lukHz\n",
+ pr_debug("Set actual frequency %lukHz\n",
clk_get_rate(armclk) / 1000);
return 0;
@@ -153,7 +155,7 @@ static void __init s3c64xx_cpufreq_config_regulator(void)
count = regulator_count_voltages(vddarm);
if (count < 0) {
- pr_err("cpufreq: Unable to check supported voltages\n");
+ pr_err("Unable to check supported voltages\n");
}
freq = s3c64xx_freq_table;
@@ -171,7 +173,7 @@ static void __init s3c64xx_cpufreq_config_regulator(void)
}
if (!found) {
- pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+ pr_debug("%dkHz unsupported by regulator\n",
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
@@ -194,13 +196,13 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
return -EINVAL;
if (s3c64xx_freq_table == NULL) {
- pr_err("cpufreq: No frequency information for this CPU\n");
+ pr_err("No frequency information for this CPU\n");
return -ENODEV;
}
armclk = clk_get(NULL, "armclk");
if (IS_ERR(armclk)) {
- pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
+ pr_err("Unable to obtain ARMCLK: %ld\n",
PTR_ERR(armclk));
return PTR_ERR(armclk);
}
@@ -209,12 +211,19 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
vddarm = regulator_get(NULL, "vddarm");
if (IS_ERR(vddarm)) {
ret = PTR_ERR(vddarm);
- pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
- pr_err("cpufreq: Only frequency scaling available\n");
+ pr_err("Failed to obtain VDDARM: %d\n", ret);
+ pr_err("Only frequency scaling available\n");
vddarm = NULL;
} else {
s3c64xx_cpufreq_config_regulator();
}
+
+ vddint = regulator_get(NULL, "vddint");
+ if (IS_ERR(vddint)) {
+ ret = PTR_ERR(vddint);
+ pr_err("Failed to obtain VDDINT: %d\n", ret);
+ vddint = NULL;
+ }
#endif
freq = s3c64xx_freq_table;
@@ -225,7 +234,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
r = clk_round_rate(armclk, freq->frequency * 1000);
r /= 1000;
if (r != freq->frequency) {
- pr_debug("cpufreq: %dkHz unsupported by clock\n",
+ pr_debug("%dkHz unsupported by clock\n",
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
@@ -248,7 +257,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
if (ret != 0) {
- pr_err("cpufreq: Failed to configure frequency table: %d\n",
+ pr_err("Failed to configure frequency table: %d\n",
ret);
regulator_put(vddarm);
clk_put(armclk);