Merge tag 'omap-for-v3.12/dra7xx' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Minimal DRA7xx based SoC core support via Rajendra Nayak <rnayak@ti.com>

* tag 'omap-for-v3.12/dra7xx' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (849 commits)
  ARM: DRA7: Add the build support in omap2plus
  ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
  ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
  ARM: DRA7: board-generic: Add basic DT support
  ARM: DRA7: Resue the clocksource, clockevent support
  ARM: DRA7: Reuse io tables and add a new .init_early
  ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
  Linux 3.11-rc5
  btrfs: don't loop on large offsets in readdir
  Btrfs: check to see if root_list is empty before adding it to dead roots
  Btrfs: release both paths before logging dir/changed extents
  Btrfs: allow splitting of hole em's when dropping extent cache
  Btrfs: make sure the backref walker catches all refs to our extent
  Btrfs: fix backref walking when we hit a compressed extent
  Btrfs: do not offset physical if we're compressed
  Btrfs: fix extent buffer leak after backref walking
  Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents
  btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
  dlm: kill the unnecessary and wrong device_close()->recalc_sigpending()
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

1 files changed, 4 insertions, 102 deletions

diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index fe343a06b7d..bc580b67a65 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -28,13 +28,6 @@
 #define MAX_INTERESTING 50000
 #define STDDEV_THRESH 400
 
-/* 60 * 60 > STDDEV_THRESH * INTERVALS = 400 * 8 */
-#define MAX_DEVIATION 60
-
-static DEFINE_PER_CPU(struct hrtimer, menu_hrtimer);
-static DEFINE_PER_CPU(int, hrtimer_status);
-/* menu hrtimer mode */
-enum {MENU_HRTIMER_STOP, MENU_HRTIMER_REPEAT, MENU_HRTIMER_GENERAL};
 
 /*
  * Concepts and ideas behind the menu governor
@@ -116,13 +109,6 @@ enum {MENU_HRTIMER_STOP, MENU_HRTIMER_REPEAT, MENU_HRTIMER_GENERAL};
  *
  */
 
-/*
- * The C-state residency is so long that is is worthwhile to exit
- * from the shallow C-state and re-enter into a deeper C-state.
- */
-static unsigned int perfect_cstate_ms __read_mostly = 30;
-module_param(perfect_cstate_ms, uint, 0000);
-
 struct menu_device {
 	int		last_state_idx;
 	int             needs_update;
@@ -205,52 +191,17 @@ static u64 div_round64(u64 dividend, u32 divisor)
 	return div_u64(dividend + (divisor / 2), divisor);
 }
 
-/* Cancel the hrtimer if it is not triggered yet */
-void menu_hrtimer_cancel(void)
-{
-	int cpu = smp_processor_id();
-	struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
-
-	/* The timer is still not time out*/
-	if (per_cpu(hrtimer_status, cpu)) {
-		hrtimer_cancel(hrtmr);
-		per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
-	}
-}
-EXPORT_SYMBOL_GPL(menu_hrtimer_cancel);
-
-/* Call back for hrtimer is triggered */
-static enum hrtimer_restart menu_hrtimer_notify(struct hrtimer *hrtimer)
-{
-	int cpu = smp_processor_id();
-	struct menu_device *data = &per_cpu(menu_devices, cpu);
-
-	/* In general case, the expected residency is much larger than
-	 *  deepest C-state target residency, but prediction logic still
-	 *  predicts a small predicted residency, so the prediction
-	 *  history is totally broken if the timer is triggered.
-	 *  So reset the correction factor.
-	 */
-	if (per_cpu(hrtimer_status, cpu) == MENU_HRTIMER_GENERAL)
-		data->correction_factor[data->bucket] = RESOLUTION * DECAY;
-
-	per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
-
-	return HRTIMER_NORESTART;
-}
-
 /*
  * Try detecting repeating patterns by keeping track of the last 8
  * intervals, and checking if the standard deviation of that set
  * of points is below a threshold. If it is... then use the
  * average of these 8 points as the estimated value.
  */
-static u32 get_typical_interval(struct menu_device *data)
+static void get_typical_interval(struct menu_device *data)
 {
 	int i = 0, divisor = 0;
 	uint64_t max = 0, avg = 0, stddev = 0;
 	int64_t thresh = LLONG_MAX; /* Discard outliers above this value. */
-	unsigned int ret = 0;
 
 again:
 
@@ -291,16 +242,13 @@ again:
 	if (((avg > stddev * 6) && (divisor * 4 >= INTERVALS * 3))
 							|| stddev <= 20) {
 		data->predicted_us = avg;
-		ret = 1;
-		return ret;
+		return;
 
 	} else if ((divisor * 4) > INTERVALS * 3) {
 		/* Exclude the max interval */
 		thresh = max - 1;
 		goto again;
 	}
-
-	return ret;
 }
 
 /**
@@ -315,9 +263,6 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 	int i;
 	int multiplier;
 	struct timespec t;
-	int repeat = 0, low_predicted = 0;
-	int cpu = smp_processor_id();
-	struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
 
 	if (data->needs_update) {
 		menu_update(drv, dev);
@@ -352,7 +297,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 	data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
 					 RESOLUTION * DECAY);
 
-	repeat = get_typical_interval(data);
+	get_typical_interval(data);
 
 	/*
 	 * We want to default to C1 (hlt), not to busy polling
@@ -373,10 +318,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 
 		if (s->disabled || su->disable)
 			continue;
-		if (s->target_residency > data->predicted_us) {
-			low_predicted = 1;
+		if (s->target_residency > data->predicted_us)
 			continue;
-		}
 		if (s->exit_latency > latency_req)
 			continue;
 		if (s->exit_latency * multiplier > data->predicted_us)
@@ -386,44 +329,6 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 		data->exit_us = s->exit_latency;
 	}
 
-	/* not deepest C-state chosen for low predicted residency */
-	if (low_predicted) {
-		unsigned int timer_us = 0;
-		unsigned int perfect_us = 0;
-
-		/*
-		 * Set a timer to detect whether this sleep is much
-		 * longer than repeat mode predicted.  If the timer
-		 * triggers, the code will evaluate whether to put
-		 * the CPU into a deeper C-state.
-		 * The timer is cancelled on CPU wakeup.
-		 */
-		timer_us = 2 * (data->predicted_us + MAX_DEVIATION);
-
-		perfect_us = perfect_cstate_ms * 1000;
-
-		if (repeat && (4 * timer_us < data->expected_us)) {
-			RCU_NONIDLE(hrtimer_start(hrtmr,
-				ns_to_ktime(1000 * timer_us),
-				HRTIMER_MODE_REL_PINNED));
-			/* In repeat case, menu hrtimer is started */
-			per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_REPEAT;
-		} else if (perfect_us < data->expected_us) {
-			/*
-			 * The next timer is long. This could be because
-			 * we did not make a useful prediction.
-			 * In that case, it makes sense to re-enter
-			 * into a deeper C-state after some time.
-			 */
-			RCU_NONIDLE(hrtimer_start(hrtmr,
-				ns_to_ktime(1000 * timer_us),
-				HRTIMER_MODE_REL_PINNED));
-			/* In general case, menu hrtimer is started */
-			per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_GENERAL;
-		}
-
-	}
-
 	return data->last_state_idx;
 }
 
@@ -514,9 +419,6 @@ static int menu_enable_device(struct cpuidle_driver *drv,
 				struct cpuidle_device *dev)
 {
 	struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
-	struct hrtimer *t = &per_cpu(menu_hrtimer, dev->cpu);
-	hrtimer_init(t, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	t->function = menu_hrtimer_notify;
 
 	memset(data, 0, sizeof(struct menu_device));