diff options
author | Rafael J. Wysocki <rjw@sisk.pl> | 2011-12-21 09:51:23 +0100 |
---|---|---|
committer | Rafael J. Wysocki <rjw@sisk.pl> | 2011-12-21 09:51:23 +0100 |
commit | dfa9d178cd28caf5d76bc4f37f4b3e7e8df8e697 (patch) | |
tree | d97ca7790d8a622cba9fdd19832decdb0aa6418a /drivers/devfreq/exynos4_bus.c | |
parent | 3f19f08a7ec74cfc50fbad3c5e615760afbd23a0 (diff) | |
parent | 7b4050381127ae11fcfc74a106d715a5fbbf888a (diff) |
Merge branch 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung into pm-devfreq
* 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung: (765 commits)
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
pci: Fix hotplug of Express Module with pci bridges
i2c-eg20t: correct the driver init order of pch_i2c_probe()
I2C: OMAP: fix FIFO usage for OMAP4
i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio
i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle
Linux 3.2-rc6
Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"
btrfs: lower the dirty balance poll interval
drm/i915/dp: Dither down to 6bpc if it makes the mode fit
drm/i915: enable semaphores on per-device defaults
drm/i915: don't set unpin_work if vblank_get fails
drm/i915: By default, enable RC6 on IVB and SNB when reasonable
iommu: Export intel_iommu_enabled to signal when iommu is in use
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
drm/i915: prevent division by zero when asking for chipset power
drm/i915: add PCH info to i915_capabilities
drm/i915: set the right SDVO transcoder for CPT
drm/i915: no-lvds quirk for ASUS AT5NM10T-I
sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
...
Diffstat (limited to 'drivers/devfreq/exynos4_bus.c')
-rw-r--r-- | drivers/devfreq/exynos4_bus.c | 1135 |
1 files changed, 1135 insertions, 0 deletions
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c new file mode 100644 index 00000000000..6460577d670 --- /dev/null +++ b/drivers/devfreq/exynos4_bus.c @@ -0,0 +1,1135 @@ +/* drivers/devfreq/exynos4210_memorybus.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework + * This version supports EXYNOS4210 only. This changes bus frequencies + * and vddint voltages. Exynos4412/4212 should be able to be supported + * with minor modifications. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/suspend.h> +#include <linux/opp.h> +#include <linux/devfreq.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> + +/* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */ +#ifdef CONFIG_EXYNOS_ASV +extern unsigned int exynos_result_of_asv; +#endif + +#include <mach/regs-clock.h> + +#include <plat/map-s5p.h> + +#define MAX_SAFEVOLT 1200000 /* 1.2V */ + +enum exynos4_busf_type { + TYPE_BUSF_EXYNOS4210, + TYPE_BUSF_EXYNOS4x12, +}; + +/* Assume that the bus is saturated if the utilization is 40% */ +#define BUS_SATURATION_RATIO 40 + +enum ppmu_counter { + PPMU_PMNCNT0 = 0, + PPMU_PMCCNT1, + PPMU_PMNCNT2, + PPMU_PMNCNT3, + PPMU_PMNCNT_MAX, +}; +struct exynos4_ppmu { + void __iomem *hw_base; + unsigned int ccnt; + unsigned int event; + unsigned int count[PPMU_PMNCNT_MAX]; + bool ccnt_overflow; + bool count_overflow[PPMU_PMNCNT_MAX]; +}; + +enum busclk_level_idx { + LV_0 = 0, + LV_1, + LV_2, + LV_3, + LV_4, + _LV_END +}; +#define EX4210_LV_MAX LV_2 +#define EX4x12_LV_MAX LV_4 +#define EX4210_LV_NUM (LV_2 + 1) +#define EX4x12_LV_NUM (LV_4 + 1) + +struct busfreq_data { + enum exynos4_busf_type type; + struct device *dev; + struct devfreq *devfreq; + bool disabled; + struct regulator *vdd_int; + struct regulator *vdd_mif; /* Exynos4412/4212 only */ + struct opp *curr_opp; + struct exynos4_ppmu dmc[2]; + + struct notifier_block pm_notifier; + struct mutex lock; + + /* Dividers calculated at boot/probe-time */ + unsigned int dmc_divtable[_LV_END]; /* DMC0 */ + unsigned int top_divtable[_LV_END]; +}; + +struct bus_opp_table { + unsigned int idx; + unsigned long clk; + unsigned long volt; +}; + +/* 4210 controls clock of mif and voltage of int */ +static struct bus_opp_table exynos4210_busclk_table[] = { + {LV_0, 400000, 1150000}, + {LV_1, 267000, 1050000}, + {LV_2, 133000, 1025000}, + {0, 0, 0}, +}; + +/* + * MIF is the main control knob clock for exynox4x12 MIF/INT + * clock and voltage of both mif/int are controlled. + */ +static struct bus_opp_table exynos4x12_mifclk_table[] = { + {LV_0, 400000, 1100000}, + {LV_1, 267000, 1000000}, + {LV_2, 160000, 950000}, + {LV_3, 133000, 950000}, + {LV_4, 100000, 950000}, + {0, 0, 0}, +}; + +/* + * INT is not the control knob of 4x12. LV_x is not meant to represent + * the current performance. (MIF does) + */ +static struct bus_opp_table exynos4x12_intclk_table[] = { + {LV_0, 200000, 1000000}, + {LV_1, 160000, 950000}, + {LV_2, 133000, 925000}, + {LV_3, 100000, 900000}, + {0, 0, 0}, +}; + +/* TODO: asv volt definitions are "__initdata"? */ +/* Some chips have different operating voltages */ +static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = { + {1150000, 1050000, 1050000}, + {1125000, 1025000, 1025000}, + {1100000, 1000000, 1000000}, + {1075000, 975000, 975000}, + {1050000, 950000, 950000}, +}; + +static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = { + /* 400 267 160 133 100 */ + {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */ + {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */ + {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */ + {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */ + {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */ + {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */ + {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */ + {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */ + {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */ +}; + +static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = { + /* 200 160 133 100 */ + {1000000, 950000, 925000, 900000}, /* ASV0 */ + {975000, 925000, 925000, 900000}, /* ASV1 */ + {950000, 925000, 900000, 875000}, /* ASV2 */ + {950000, 900000, 900000, 875000}, /* ASV3 */ + {925000, 875000, 875000, 875000}, /* ASV4 */ + {900000, 850000, 850000, 850000}, /* ASV5 */ + {900000, 850000, 850000, 850000}, /* ASV6 */ + {900000, 850000, 850000, 850000}, /* ASV7 */ + {900000, 850000, 850000, 850000}, /* ASV8 */ +}; + +/*** Clock Divider Data for Exynos4210 ***/ +static unsigned int exynos4210_clkdiv_dmc0[][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + /* DMC L1: 266.7MHz */ + { 4, 1, 1, 2, 1, 1, 3, 1 }, + /* DMC L2: 133MHz */ + { 5, 1, 1, 5, 1, 1, 3, 1 }, +}; +static unsigned int exynos4210_clkdiv_top[][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + /* ACLK200 L1: 160MHz */ + { 4, 7, 5, 6, 1 }, + /* ACLK200 L2: 133MHz */ + { 5, 7, 7, 7, 1 }, +}; +static unsigned int exynos4210_clkdiv_lr_bus[][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + /* ACLK_GDL/R L2: 160MHz */ + { 4, 1 }, + /* ACLK_GDL/R L3: 133MHz */ + { 5, 1 }, +}; + +/*** Clock Divider Data for Exynos4212/4412 ***/ +static unsigned int exynos4x12_clkdiv_dmc0[][6] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP} + */ + + /* DMC L0: 400MHz */ + {3, 1, 1, 1, 1, 1}, + /* DMC L1: 266.7MHz */ + {4, 1, 1, 2, 1, 1}, + /* DMC L2: 160MHz */ + {5, 1, 1, 4, 1, 1}, + /* DMC L3: 133MHz */ + {5, 1, 1, 5, 1, 1}, + /* DMC L4: 100MHz */ + {7, 1, 1, 7, 1, 1}, +}; +static unsigned int exynos4x12_clkdiv_dmc1[][6] = { + /* + * Clock divider value for following + * { G2DACP, DIVC2C, DIVC2C_ACLK } + */ + + /* DMC L0: 400MHz */ + {3, 1, 1}, + /* DMC L1: 266.7MHz */ + {4, 2, 1}, + /* DMC L2: 160MHz */ + {5, 4, 1}, + /* DMC L3: 133MHz */ + {5, 5, 1}, + /* DMC L4: 100MHz */ + {7, 7, 1}, +}; +static unsigned int exynos4x12_clkdiv_top[][5] = { + /* + * Clock divider value for following + * { DIVACLK266_GPS, DIVACLK100, DIVACLK160, + DIVACLK133, DIVONENAND } + */ + + /* ACLK_GDL/R L0: 200MHz */ + {2, 7, 4, 5, 1}, + /* ACLK_GDL/R L1: 200MHz */ + {2, 7, 4, 5, 1}, + /* ACLK_GDL/R L2: 160MHz */ + {4, 7, 5, 7, 1}, + /* ACLK_GDL/R L3: 133MHz */ + {4, 7, 5, 7, 1}, + /* ACLK_GDL/R L4: 100MHz */ + {7, 7, 7, 7, 1}, +}; +static unsigned int exynos4x12_clkdiv_lr_bus[][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + {3, 1}, + /* ACLK_GDL/R L1: 200MHz */ + {3, 1}, + /* ACLK_GDL/R L2: 160MHz */ + {4, 1}, + /* ACLK_GDL/R L3: 133MHz */ + {5, 1}, + /* ACLK_GDL/R L4: 100MHz */ + {7, 1}, +}; +static unsigned int exynos4x12_clkdiv_sclkip[][3] = { + /* + * Clock divider value for following + * { DIVMFC, DIVJPEG, DIVFIMC0~3} + */ + + /* SCLK_MFC: 200MHz */ + {3, 3, 4}, + /* SCLK_MFC: 200MHz */ + {3, 3, 4}, + /* SCLK_MFC: 160MHz */ + {4, 4, 5}, + /* SCLK_MFC: 133MHz */ + {5, 5, 5}, + /* SCLK_MFC: 100MHz */ + {7, 7, 7}, +}; + + +static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) +{ + unsigned int index; + unsigned int tmp; + + for (index = LV_0; index < EX4210_LV_NUM; index++) + if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk) + break; + + if (index == EX4210_LV_NUM) + return -EINVAL; + + /* Change Divider - DMC0 */ + tmp = data->dmc_divtable[index]; + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + tmp = data->top_divtable[index]; + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << + S5P_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4210_clkdiv_lr_bus[index][1] << + S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << + S5P_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4210_clkdiv_lr_bus[index][1] << + S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); + + return 0; +} + +static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp) +{ + unsigned int index; + unsigned int tmp; + + for (index = LV_0; index < EX4x12_LV_NUM; index++) + if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk) + break; + + if (index == EX4x12_LV_NUM) + return -EINVAL; + + /* Change Divider - DMC0 */ + tmp = data->dmc_divtable[index]; + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - DMC1 */ + tmp = __raw_readl(S5P_CLKDIV_DMC1); + + tmp &= ~(S5P_CLKDIV_DMC1_G2D_ACP_MASK | + S5P_CLKDIV_DMC1_C2C_MASK | + S5P_CLKDIV_DMC1_C2CACLK_MASK); + + tmp |= ((exynos4x12_clkdiv_dmc1[index][0] << + S5P_CLKDIV_DMC1_G2D_ACP_SHIFT) | + (exynos4x12_clkdiv_dmc1[index][1] << + S5P_CLKDIV_DMC1_C2C_SHIFT) | + (exynos4x12_clkdiv_dmc1[index][2] << + S5P_CLKDIV_DMC1_C2CACLK_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_DMC1); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC1); + } while (tmp & 0x111111); + + /* Change Divider - TOP */ + tmp = __raw_readl(S5P_CLKDIV_TOP); + + tmp &= ~(S5P_CLKDIV_TOP_ACLK266_GPS_MASK | + S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | + S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((exynos4x12_clkdiv_top[index][0] << + S5P_CLKDIV_TOP_ACLK266_GPS_SHIFT) | + (exynos4x12_clkdiv_top[index][1] << + S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (exynos4x12_clkdiv_top[index][2] << + S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (exynos4x12_clkdiv_top[index][3] << + S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (exynos4x12_clkdiv_top[index][4] << + S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << + S5P_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4x12_clkdiv_lr_bus[index][1] << + S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << + S5P_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4x12_clkdiv_lr_bus[index][1] << + S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); + + /* Change Divider - MFC */ + tmp = __raw_readl(S5P_CLKDIV_MFC); + + tmp &= ~(S5P_CLKDIV_MFC_MASK); + + tmp |= ((exynos4x12_clkdiv_sclkip[index][0] << + S5P_CLKDIV_MFC_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_MFC); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_MFC); + } while (tmp & 0x1); + + /* Change Divider - JPEG */ + tmp = __raw_readl(S5P_CLKDIV_CAM1); + + tmp &= ~(S5P_CLKDIV_CAM1_JPEG_MASK); + + tmp |= ((exynos4x12_clkdiv_sclkip[index][1] << + S5P_CLKDIV_CAM1_JPEG_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CAM1); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1); + } while (tmp & 0x1); + + /* Change Divider - FIMC0~3 */ + tmp = __raw_readl(S5P_CLKDIV_CAM); + + tmp &= ~(S5P_CLKDIV_CAM_FIMC0_MASK | S5P_CLKDIV_CAM_FIMC1_MASK | + S5P_CLKDIV_CAM_FIMC2_MASK | S5P_CLKDIV_CAM_FIMC3_MASK); + + tmp |= ((exynos4x12_clkdiv_sclkip[index][2] << + S5P_CLKDIV_CAM_FIMC0_SHIFT) | + (exynos4x12_clkdiv_sclkip[index][2] << + S5P_CLKDIV_CAM_FIMC1_SHIFT) | + (exynos4x12_clkdiv_sclkip[index][2] << + S5P_CLKDIV_CAM_FIMC2_SHIFT) | + (exynos4x12_clkdiv_sclkip[index][2] << + S5P_CLKDIV_CAM_FIMC3_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CAM); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1); + } while (tmp & 0x1111); + + return 0; +} + + +static void busfreq_mon_reset(struct busfreq_data *data) +{ + unsigned int i; + + for (i = 0; i < 2; i++) { + void __iomem *ppmu_base = data->dmc[i].hw_base; + + /* Reset PPMU */ + __raw_writel(0x8000000f, ppmu_base + 0xf010); + __raw_writel(0x8000000f, ppmu_base + 0xf050); + __raw_writel(0x6, ppmu_base + 0xf000); + __raw_writel(0x0, ppmu_base + 0xf100); + + /* Set PPMU Event */ + data->dmc[i].event = 0x6; + __raw_writel(((data->dmc[i].event << 12) | 0x1), + ppmu_base + 0xfc); + + /* Start PPMU */ + __raw_writel(0x1, ppmu_base + 0xf000); + } +} + +static void exynos4_read_ppmu(struct busfreq_data *data) +{ + int i, j; + + for (i = 0; i < 2; i++) { + void __iomem *ppmu_base = data->dmc[i].hw_base; + u32 overflow; + + /* Stop PPMU */ + __raw_writel(0x0, ppmu_base + 0xf000); + + /* Update local data from PPMU */ + overflow = __raw_readl(ppmu_base + 0xf050); + + data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100); + data->dmc[i].ccnt_overflow = overflow & (1 << 31); + + for (j = 0; j < PPMU_PMNCNT_MAX; j++) { + data->dmc[i].count[j] = __raw_readl( + ppmu_base + (0xf110 + (0x10 * j))); + data->dmc[i].count_overflow[j] = overflow & (1 << j); + } + } + + busfreq_mon_reset(data); +} + +static int exynos4x12_get_intspec(unsigned long mifclk) +{ + int i = 0; + + while (exynos4x12_intclk_table[i].clk) { + if (exynos4x12_intclk_table[i].clk <= mifclk) + return i; + i++; + } + + return -EINVAL; +} + +static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, + struct opp *oldopp) +{ + int err = 0, tmp; + unsigned long volt = opp_get_voltage(opp); + + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + /* OPP represents DMC clock + INT voltage */ + err = regulator_set_voltage(data->vdd_int, volt, + MAX_SAFEVOLT); + break; + case TYPE_BUSF_EXYNOS4x12: + /* OPP represents MIF clock + MIF voltage */ + err = regulator_set_voltage(data->vdd_mif, volt, + MAX_SAFEVOLT); + if (err) + break; + + tmp = exynos4x12_get_intspec(opp_get_freq(opp)); + if (tmp < 0) { + err = tmp; + regulator_set_voltage(data->vdd_mif, + opp_get_voltage(oldopp), + MAX_SAFEVOLT); + break; + } + err = regulator_set_voltage(data->vdd_int, + exynos4x12_intclk_table[tmp].volt, + MAX_SAFEVOLT); + /* Try to recover */ + if (err) + regulator_set_voltage(data->vdd_mif, + opp_get_voltage(oldopp), + MAX_SAFEVOLT); + break; + default: + err = -EINVAL; + } + + return err; +} + +static int exynos4_bus_target(struct device *dev, unsigned long *_freq) +{ + int err = 0; + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data *data = platform_get_drvdata(pdev); + struct opp *opp = devfreq_recommended_opp(dev, _freq); + unsigned long old_freq = opp_get_freq(data->curr_opp); + unsigned long freq = opp_get_freq(opp); + + if (old_freq == freq) + return 0; + + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp)); + + mutex_lock(&data->lock); + + if (data->disabled) + goto out; + + if (old_freq < freq) + err = exynos4_bus_setvolt(data, opp, data->curr_opp); + if (err) + goto out; + + if (old_freq != freq) { + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + err = exynos4210_set_busclk(data, opp); + break; + case TYPE_BUSF_EXYNOS4x12: + err = exynos4x12_set_busclk(data, opp); + break; + default: + err = -EINVAL; + } + } + if (err) + goto out; + + if (old_freq > freq) + err = exynos4_bus_setvolt(data, opp, data->curr_opp); + if (err) + goto out; + + data->curr_opp = opp; +out: + mutex_unlock(&data->lock); + return err; +} + +static int exynos4_get_busier_dmc(struct busfreq_data *data) +{ + u64 p0 = data->dmc[0].count[0]; + u64 p1 = data->dmc[1].count[0]; + + p0 *= data->dmc[1].ccnt; + p1 *= data->dmc[0].ccnt; + + if (data->dmc[1].ccnt == 0) + return 0; + + if (p0 > p1) + return 0; + return 1; +} + +static int exynos4_bus_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data *data = platform_get_drvdata(pdev); + int busier_dmc; + int cycles_x2 = 2; /* 2 x cycles */ + void __iomem *addr; + u32 timing; + u32 memctrl; + + exynos4_read_ppmu(data); + busier_dmc = exynos4_get_busier_dmc(data); + stat->current_frequency = opp_get_freq(data->curr_opp); + + if (busier_dmc) + addr = S5P_VA_DMC1; + else + addr = S5P_VA_DMC0; + + memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */ + timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */ + + switch ((memctrl >> 8) & 0xf) { + case 0x4: /* DDR2 */ + cycles_x2 = ((timing >> 16) & 0xf) * 2; + break; + case 0x5: /* LPDDR2 */ + case 0x6: /* DDR3 */ + cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf); + break; + default: + pr_err("%s: Unknown Memory Type(%d).\n", __func__, + (memctrl >> 8) & 0xf); + return -EINVAL; + } + + /* Number of cycles spent on memory access */ + stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2); + stat->busy_time *= 100 / BUS_SATURATION_RATIO; + stat->total_time = data->dmc[busier_dmc].ccnt; + + /* If the counters have overflown, retry */ + if (data->dmc[busier_dmc].ccnt_overflow || + data->dmc[busier_dmc].count_overflow[0]) + return -EAGAIN; + + return 0; +} + +static void exynos4_bus_exit(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data *data = platform_get_drvdata(pdev); + + devfreq_unregister_opp_notifier(dev, data->devfreq); +} + +static struct devfreq_dev_profile exynos4_devfreq_profile = { + .initial_freq = 400000, + .polling_ms = 50, + .target = exynos4_bus_target, + .get_dev_status = exynos4_bus_get_dev_status, + .exit = exynos4_bus_exit, +}; + +static int exynos4210_init_tables(struct busfreq_data *data) +{ + u32 tmp; + int mgrp; + int i, err = 0; + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + for (i = LV_0; i < EX4210_LV_NUM; i++) { + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | + S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | + S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | + S5P_CLKDIV_DMC0_DMCP_MASK | + S5P_CLKDIV_DMC0_COPY2_MASK | + S5P_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((exynos4210_clkdiv_dmc0[i][0] << + S5P_CLKDIV_DMC0_ACP_SHIFT) | + (exynos4210_clkdiv_dmc0[i][1] << + S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (exynos4210_clkdiv_dmc0[i][2] << + S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (exynos4210_clkdiv_dmc0[i][3] << + S5P_CLKDIV_DMC0_DMC_SHIFT) | + (exynos4210_clkdiv_dmc0[i][4] << + S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (exynos4210_clkdiv_dmc0[i][5] << + S5P_CLKDIV_DMC0_DMCP_SHIFT) | + (exynos4210_clkdiv_dmc0[i][6] << + S5P_CLKDIV_DMC0_COPY2_SHIFT) | + (exynos4210_clkdiv_dmc0[i][7] << + S5P_CLKDIV_DMC0_CORETI_SHIFT)); + + data->dmc_divtable[i] = tmp; + } + + tmp = __raw_readl(S5P_CLKDIV_TOP); + for (i = LV_0; i < EX4210_LV_NUM; i++) { + tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | + S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | + S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((exynos4210_clkdiv_top[i][0] << + S5P_CLKDIV_TOP_ACLK200_SHIFT) | + (exynos4210_clkdiv_top[i][1] << + S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (exynos4210_clkdiv_top[i][2] << + S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (exynos4210_clkdiv_top[i][3] << + S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (exynos4210_clkdiv_top[i][4] << + S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + data->top_divtable[i] = tmp; + } + +#ifdef CONFIG_EXYNOS_ASV + tmp = exynos4_result_of_asv; +#else + tmp = 0; /* Max voltages for the reliability of the unknown */ +#endif + + pr_debug("ASV Group of Exynos4 is %d\n", tmp); + /* Use merged grouping for voltage */ + switch (tmp) { + case 0: + mgrp = 0; + break; + case 1: + case 2: + mgrp = 1; + break; + case 3: + case 4: + mgrp = 2; + break; + case 5: + case 6: + mgrp = 3; + break; + case 7: + mgrp = 4; + break; + default: + pr_warn("Unknown ASV Group. Use max voltage.\n"); + mgrp = 0; + } + + for (i = LV_0; i < EX4210_LV_NUM; i++) + exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; + + for (i = LV_0; i < EX4210_LV_NUM; i++) { + err = opp_add(data->dev, exynos4210_busclk_table[i].clk, + exynos4210_busclk_table[i].volt); + if (err) { + dev_err(data->dev, "Cannot add opp entries.\n"); + return err; + } + } + + + return 0; +} + +static int exynos4x12_init_tables(struct busfreq_data *data) +{ + unsigned int i; + unsigned int tmp; + int ret; + + /* Enable pause function for DREX2 DVFS */ + tmp = __raw_readl(S5P_DMC_PAUSE_CTRL); + tmp |= DMC_PAUSE_ENABLE; + __raw_writel(tmp, S5P_DMC_PAUSE_CTRL); + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + + for (i = 0; i < EX4x12_LV_NUM; i++) { + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | + S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | + S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | + S5P_CLKDIV_DMC0_DMCP_MASK); + + tmp |= ((exynos4x12_clkdiv_dmc0[i][0] << + S5P_CLKDIV_DMC0_ACP_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][1] << + S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][2] << + S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][3] << + S5P_CLKDIV_DMC0_DMC_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][4] << + S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][5] << + S5P_CLKDIV_DMC0_DMCP_SHIFT)); + + data->dmc_divtable[i] = tmp; + } + +#ifdef CONFIG_EXYNOS_ASV + tmp = exynos4_result_of_asv; +#else + tmp = 0; /* Max voltages for the reliability of the unknown */ +#endif + + if (tmp > 8) + tmp = 0; + pr_debug("ASV Group of Exynos4x12 is %d\n", tmp); + + for (i = 0; i < EX4x12_LV_NUM; i++) { + exynos4x12_mifclk_table[i].volt = + exynos4x12_mif_step_50[tmp][i]; + exynos4x12_intclk_table[i].volt = + exynos4x12_int_volt[tmp][i]; + } + + for (i = 0; i < EX4x12_LV_NUM; i++) { + ret = opp_add(data->dev, exynos4x12_mifclk_table[i].clk, + exynos4x12_mifclk_table[i].volt); + if (ret) { + dev_err(data->dev, "Fail to add opp entries.\n"); + return ret; + } + } + + return 0; +} + +static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct busfreq_data *data = container_of(this, struct busfreq_data, + pm_notifier); + struct opp *opp; + unsigned long maxfreq = ULONG_MAX; + int err = 0; + + switch (event) { + case PM_SUSPEND_PREPARE: + /* Set Fastest and Deactivate DVFS */ + mutex_lock(&data->lock); + + data->disabled = true; + + opp = opp_find_freq_floor(data->dev, &maxfreq); + + err = exynos4_bus_setvolt(data, opp, data->curr_opp); + if (err) + goto unlock; + + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + err = exynos4210_set_busclk(data, opp); + break; + case TYPE_BUSF_EXYNOS4x12: + err = exynos4x12_set_busclk(data, opp); + break; + default: + err = -EINVAL; + } + if (err) + goto unlock; + + data->curr_opp = opp; +unlock: + mutex_unlock(&data->lock); + if (err) + return err; + return NOTIFY_OK; + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + /* Reactivate */ + mutex_lock(&data->lock); + data->disabled = false; + mutex_unlock(&data->lock); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static __devinit int exynos4_busfreq_probe(struct platform_device *pdev) +{ + struct busfreq_data *data; + struct opp *opp; + struct device *dev = &pdev->dev; + int err = 0; + + data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + + data->type = pdev->id_entry->driver_data; + data->dmc[0].hw_base = S5P_VA_DMC0; + data->dmc[1].hw_base = S5P_VA_DMC1; + data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event; + data->dev = dev; + mutex_init(&data->lock); + + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + err = exynos4210_init_tables(data); + break; + case TYPE_BUSF_EXYNOS4x12: + err = exynos4x12_init_tables(data); + break; + default: + dev_err(dev, "Cannot determine the device id %d\n", data->type); + err = -EINVAL; + } + if (err) + goto err_regulator; + + data->vdd_int = regulator_get(dev, "vdd_int"); + if (IS_ERR(data->vdd_int)) { + dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); + err = PTR_ERR(data->vdd_int); + goto err_regulator; + } + if (data->type == TYPE_BUSF_EXYNOS4x12) { + data->vdd_mif = regulator_get(dev, "vdd_mif"); + if (IS_ERR(data->vdd_mif)) { + dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n"); + err = PTR_ERR(data->vdd_mif); + regulator_put(data->vdd_int); + goto err_regulator; + + } + } + + opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); + if (IS_ERR(opp)) { + dev_err(dev, "Invalid initial frequency %lu kHz.\n", + exynos4_devfreq_profile.initial_freq); + err = PTR_ERR(opp); + goto err_opp_add; + } + data->curr_opp = opp; + + platform_set_drvdata(pdev, data); + + busfreq_mon_reset(data); + + data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile, + &devfreq_simple_ondemand, NULL); + if (IS_ERR(data->devfreq)) { + err = PTR_ERR(data->devfreq); + goto err_opp_add; + } + + devfreq_register_opp_notifier(dev, data->devfreq); + + err = register_pm_notifier(&data->pm_notifier); + if (err) { + dev_err(dev, "Failed to setup pm notifier\n"); + goto err_devfreq_add; + } + + return 0; +err_devfreq_add: + devfreq_remove_device(data->devfreq); +err_opp_add: + if (data->vdd_mif) + regulator_put(data->vdd_mif); + regulator_put(data->vdd_int); +err_regulator: + kfree(data); + return err; +} + +static __devexit int exynos4_busfreq_remove(struct platform_device *pdev) +{ + struct busfreq_data *data = platform_get_drvdata(pdev); + + unregister_pm_notifier(&data->pm_notifier); + devfreq_remove_device(data->devfreq); + regulator_put(data->vdd_int); + if (data->vdd_mif) + regulator_put(data->vdd_mif); + kfree(data); + + return 0; +} + +static int exynos4_busfreq_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data *data = platform_get_drvdata(pdev); + + busfreq_mon_reset(data); + return 0; +} + +static const struct dev_pm_ops exynos4_busfreq_pm = { + .resume = exynos4_busfreq_resume, +}; + +static const struct platform_device_id exynos4_busfreq_id[] = { + { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 }, + { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 }, + { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 }, + { }, +}; + +static struct platform_driver exynos4_busfreq_driver = { + .probe = exynos4_busfreq_probe, + .remove = __devexit_p(exynos4_busfreq_remove), + .id_table = exynos4_busfreq_id, + .driver = { + .name = "exynos4-busfreq", + .owner = THIS_MODULE, + .pm = &exynos4_busfreq_pm, + }, +}; + +static int __init exynos4_busfreq_init(void) +{ + return platform_driver_register(&exynos4_busfreq_driver); +} +late_initcall(exynos4_busfreq_init); + +static void __exit exynos4_busfreq_exit(void) +{ + platform_driver_unregister(&exynos4_busfreq_driver); +} +module_exit(exynos4_busfreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); +MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); +MODULE_ALIAS("exynos4-busfreq"); |