Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c

3 files changed, 52 insertions, 63 deletions

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index c99c00d35d3..a0b2f7e0eed 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/devfreq.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
@@ -902,13 +902,13 @@ static ssize_t available_frequencies_show(struct device *d,
 {
 	struct devfreq *df = to_devfreq(d);
 	struct device *dev = df->dev.parent;
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	ssize_t count = 0;
 	unsigned long freq = 0;
 
 	rcu_read_lock();
 	do {
-		opp = opp_find_freq_ceil(dev, &freq);
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq);
 		if (IS_ERR(opp))
 			break;
 
@@ -993,10 +993,10 @@ static int __init devfreq_init(void)
 	}
 
 	devfreq_wq = create_freezable_workqueue("devfreq_wq");
-	if (IS_ERR(devfreq_wq)) {
+	if (!devfreq_wq) {
 		class_destroy(devfreq_class);
 		pr_err("%s: couldn't create workqueue\n", __FILE__);
-		return PTR_ERR(devfreq_wq);
+		return -ENOMEM;
 	}
 	devfreq_class->dev_groups = devfreq_groups;
 
@@ -1029,25 +1029,26 @@ module_exit(devfreq_exit);
  * under the locked area. The pointer returned must be used prior to unlocking
  * with rcu_read_unlock() to maintain the integrity of the pointer.
  */
-struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq,
-				    u32 flags)
+struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
+					   unsigned long *freq,
+					   u32 flags)
 {
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 
 	if (flags & DEVFREQ_FLAG_LEAST_UPPER_BOUND) {
 		/* The freq is an upper bound. opp should be lower */
-		opp = opp_find_freq_floor(dev, freq);
+		opp = dev_pm_opp_find_freq_floor(dev, freq);
 
 		/* If not available, use the closest opp */
 		if (opp == ERR_PTR(-ERANGE))
-			opp = opp_find_freq_ceil(dev, freq);
+			opp = dev_pm_opp_find_freq_ceil(dev, freq);
 	} else {
 		/* The freq is an lower bound. opp should be higher */
-		opp = opp_find_freq_ceil(dev, freq);
+		opp = dev_pm_opp_find_freq_ceil(dev, freq);
 
 		/* If not available, use the closest opp */
 		if (opp == ERR_PTR(-ERANGE))
-			opp = opp_find_freq_floor(dev, freq);
+			opp = dev_pm_opp_find_freq_floor(dev, freq);
 	}
 
 	return opp;
@@ -1066,7 +1067,7 @@ int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq)
 	int ret = 0;
 
 	rcu_read_lock();
-	nh = opp_get_notifier(dev);
+	nh = dev_pm_opp_get_notifier(dev);
 	if (IS_ERR(nh))
 		ret = PTR_ERR(nh);
 	rcu_read_unlock();
@@ -1092,7 +1093,7 @@ int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq)
 	int ret = 0;
 
 	rcu_read_lock();
-	nh = opp_get_notifier(dev);
+	nh = dev_pm_opp_get_notifier(dev);
 	if (IS_ERR(nh))
 		ret = PTR_ERR(nh);
 	rcu_read_unlock();
diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
index c5f86d8caca..cede6f71cd6 100644
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -19,7 +19,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/suspend.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/devfreq.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -639,7 +639,7 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
 	struct platform_device *pdev = container_of(dev, struct platform_device,
 						    dev);
 	struct busfreq_data *data = platform_get_drvdata(pdev);
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	unsigned long freq;
 	unsigned long old_freq = data->curr_oppinfo.rate;
 	struct busfreq_opp_info	new_oppinfo;
@@ -650,8 +650,8 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
 		rcu_read_unlock();
 		return PTR_ERR(opp);
 	}
-	new_oppinfo.rate = opp_get_freq(opp);
-	new_oppinfo.volt = opp_get_voltage(opp);
+	new_oppinfo.rate = dev_pm_opp_get_freq(opp);
+	new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	freq = new_oppinfo.rate;
 
@@ -873,7 +873,7 @@ static int exynos4210_init_tables(struct busfreq_data *data)
 		exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i];
 
 	for (i = LV_0; i < EX4210_LV_NUM; i++) {
-		err = opp_add(data->dev, exynos4210_busclk_table[i].clk,
+		err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk,
 			      exynos4210_busclk_table[i].volt);
 		if (err) {
 			dev_err(data->dev, "Cannot add opp entries.\n");
@@ -940,7 +940,7 @@ static int exynos4x12_init_tables(struct busfreq_data *data)
 	}
 
 	for (i = 0; i < EX4x12_LV_NUM; i++) {
-		ret = opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
+		ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
 			      exynos4x12_mifclk_table[i].volt);
 		if (ret) {
 			dev_err(data->dev, "Fail to add opp entries.\n");
@@ -956,7 +956,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
 {
 	struct busfreq_data *data = container_of(this, struct busfreq_data,
 						 pm_notifier);
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	struct busfreq_opp_info	new_oppinfo;
 	unsigned long maxfreq = ULONG_MAX;
 	int err = 0;
@@ -969,7 +969,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
 		data->disabled = true;
 
 		rcu_read_lock();
-		opp = opp_find_freq_floor(data->dev, &maxfreq);
+		opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			dev_err(data->dev, "%s: unable to find a min freq\n",
@@ -977,8 +977,8 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
 			mutex_unlock(&data->lock);
 			return PTR_ERR(opp);
 		}
-		new_oppinfo.rate = opp_get_freq(opp);
-		new_oppinfo.volt = opp_get_voltage(opp);
+		new_oppinfo.rate = dev_pm_opp_get_freq(opp);
+		new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
 		rcu_read_unlock();
 
 		err = exynos4_bus_setvolt(data, &new_oppinfo,
@@ -1020,7 +1020,7 @@ unlock:
 static int exynos4_busfreq_probe(struct platform_device *pdev)
 {
 	struct busfreq_data *data;
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	struct device *dev = &pdev->dev;
 	int err = 0;
 
@@ -1065,15 +1065,16 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
 	}
 
 	rcu_read_lock();
-	opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq);
+	opp = dev_pm_opp_find_freq_floor(dev,
+					 &exynos4_devfreq_profile.initial_freq);
 	if (IS_ERR(opp)) {
 		rcu_read_unlock();
 		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
 			exynos4_devfreq_profile.initial_freq);
 		return PTR_ERR(opp);
 	}
-	data->curr_oppinfo.rate = opp_get_freq(opp);
-	data->curr_oppinfo.volt = opp_get_voltage(opp);
+	data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp);
+	data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 
 	platform_set_drvdata(pdev, data);
diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c
index 574b16b59be..a60da3c1c48 100644
--- a/drivers/devfreq/exynos/exynos5_bus.c
+++ b/drivers/devfreq/exynos/exynos5_bus.c
@@ -15,10 +15,9 @@
 #include <linux/module.h>
 #include <linux/devfreq.h>
 #include <linux/io.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
-#include <linux/opp.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
@@ -132,7 +131,7 @@ static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
 	struct platform_device *pdev = container_of(dev, struct platform_device,
 						    dev);
 	struct busfreq_data_int *data = platform_get_drvdata(pdev);
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	unsigned long old_freq, freq;
 	unsigned long volt;
 
@@ -144,8 +143,8 @@ static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
 		return PTR_ERR(opp);
 	}
 
-	freq = opp_get_freq(opp);
-	volt = opp_get_voltage(opp);
+	freq = dev_pm_opp_get_freq(opp);
+	volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 
 	old_freq = data->curr_freq;
@@ -246,7 +245,7 @@ static int exynos5250_init_int_tables(struct busfreq_data_int *data)
 	int i, err = 0;
 
 	for (i = LV_0; i < _LV_END; i++) {
-		err = opp_add(data->dev, exynos5_int_opp_table[i].clk,
+		err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk,
 				exynos5_int_opp_table[i].volt);
 		if (err) {
 			dev_err(data->dev, "Cannot add opp entries.\n");
@@ -262,7 +261,7 @@ static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
 {
 	struct busfreq_data_int *data = container_of(this,
 					struct busfreq_data_int, pm_notifier);
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	unsigned long maxfreq = ULONG_MAX;
 	unsigned long freq;
 	unsigned long volt;
@@ -276,14 +275,14 @@ static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
 		data->disabled = true;
 
 		rcu_read_lock();
-		opp = opp_find_freq_floor(data->dev, &maxfreq);
+		opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			err = PTR_ERR(opp);
 			goto unlock;
 		}
-		freq = opp_get_freq(opp);
-		volt = opp_get_voltage(opp);
+		freq = dev_pm_opp_get_freq(opp);
+		volt = dev_pm_opp_get_voltage(opp);
 		rcu_read_unlock();
 
 		err = exynos5_int_setvolt(data, volt);
@@ -316,7 +315,7 @@ unlock:
 static int exynos5_busfreq_int_probe(struct platform_device *pdev)
 {
 	struct busfreq_data_int *data;
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	struct device *dev = &pdev->dev;
 	struct device_node *np;
 	unsigned long initial_freq;
@@ -351,46 +350,43 @@ static int exynos5_busfreq_int_probe(struct platform_device *pdev)
 
 	err = exynos5250_init_int_tables(data);
 	if (err)
-		goto err_regulator;
+		return err;
 
-	data->vdd_int = regulator_get(dev, "vdd_int");
+	data->vdd_int = devm_regulator_get(dev, "vdd_int");
 	if (IS_ERR(data->vdd_int)) {
 		dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
-		err = PTR_ERR(data->vdd_int);
-		goto err_regulator;
+		return PTR_ERR(data->vdd_int);
 	}
 
-	data->int_clk = clk_get(dev, "int_clk");
+	data->int_clk = devm_clk_get(dev, "int_clk");
 	if (IS_ERR(data->int_clk)) {
 		dev_err(dev, "Cannot get clock \"int_clk\"\n");
-		err = PTR_ERR(data->int_clk);
-		goto err_clock;
+		return PTR_ERR(data->int_clk);
 	}
 
 	rcu_read_lock();
-	opp = opp_find_freq_floor(dev,
+	opp = dev_pm_opp_find_freq_floor(dev,
 			&exynos5_devfreq_int_profile.initial_freq);
 	if (IS_ERR(opp)) {
 		rcu_read_unlock();
 		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
 		       exynos5_devfreq_int_profile.initial_freq);
-		err = PTR_ERR(opp);
-		goto err_opp_add;
+		return PTR_ERR(opp);
 	}
-	initial_freq = opp_get_freq(opp);
-	initial_volt = opp_get_voltage(opp);
+	initial_freq = dev_pm_opp_get_freq(opp);
+	initial_volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	data->curr_freq = initial_freq;
 
 	err = clk_set_rate(data->int_clk, initial_freq * 1000);
 	if (err) {
 		dev_err(dev, "Failed to set initial frequency\n");
-		goto err_opp_add;
+		return err;
 	}
 
 	err = exynos5_int_setvolt(data, initial_volt);
 	if (err)
-		goto err_opp_add;
+		return err;
 
 	platform_set_drvdata(pdev, data);
 
@@ -419,12 +415,6 @@ static int exynos5_busfreq_int_probe(struct platform_device *pdev)
 
 err_devfreq_add:
 	devfreq_remove_device(data->devfreq);
-	platform_set_drvdata(pdev, NULL);
-err_opp_add:
-	clk_put(data->int_clk);
-err_clock:
-	regulator_put(data->vdd_int);
-err_regulator:
 	return err;
 }
 
@@ -435,9 +425,6 @@ static int exynos5_busfreq_int_remove(struct platform_device *pdev)
 	pm_qos_remove_request(&data->int_req);
 	unregister_pm_notifier(&data->pm_notifier);
 	devfreq_remove_device(data->devfreq);
-	regulator_put(data->vdd_int);
-	clk_put(data->int_clk);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -479,7 +466,7 @@ static int __init exynos5_busfreq_int_init(void)
 
 	exynos5_devfreq_pdev =
 		platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
-	if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) {
+	if (IS_ERR(exynos5_devfreq_pdev)) {
 		ret = PTR_ERR(exynos5_devfreq_pdev);
 		goto out1;
 	}