dma: coh901318: remove hardcoded target addresses

Nowadays the clients should use the dmaengine framework to
tell the DMA driver what target address to use, so delete
these addresses, they are for an out-of-tree driver anyway.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 19 deletions

diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index 06d97955c54..15e314af22f 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -23,7 +23,6 @@
 #include <linux/debugfs.h>
 #include <linux/platform_data/dma-coh901318.h>
 #include <mach/coh901318.h>
-#include <mach/u300-regs.h>
 
 #include "coh901318_lli.h"
 #include "dmaengine.h"
@@ -99,13 +98,11 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_TX_0,
 		.name = "MSL TX 0",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
 	},
 	{
 		.number = U300_DMA_MSL_TX_1,
 		.name = "MSL TX 1",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -157,7 +154,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_TX_2,
 		.name = "MSL TX 2",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -210,7 +206,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_TX_3,
 		.name = "MSL TX 3",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -262,7 +257,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_TX_4,
 		.name = "MSL TX 4",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -314,25 +308,21 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_TX_5,
 		.name = "MSL TX 5",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
 	},
 	{
 		.number = U300_DMA_MSL_TX_6,
 		.name = "MSL TX 6",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
 	},
 	{
 		.number = U300_DMA_MSL_RX_0,
 		.name = "MSL RX 0",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
 	},
 	{
 		.number = U300_DMA_MSL_RX_1,
 		.name = "MSL RX 1",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -371,7 +361,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_RX_2,
 		.name = "MSL RX 2",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -423,7 +412,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_RX_3,
 		.name = "MSL RX 3",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -475,7 +463,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_RX_4,
 		.name = "MSL RX 4",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -527,7 +514,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_RX_5,
 		.name = "MSL RX 5",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -579,7 +565,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_MSL_RX_6,
 		.name = "MSL RX 6",
 		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
 	},
 	/*
 	 * Don't set up device address, burst count or size of src
@@ -715,7 +700,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_PCM_I2S0_TX,
 		.name = "PCM I2S0 TX",
 		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S0_BASE + 0x14,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -767,7 +751,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_PCM_I2S0_RX,
 		.name = "PCM I2S0 RX",
 		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S0_BASE + 0x10,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -819,7 +802,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_PCM_I2S1_TX,
 		.name = "PCM I2S1 TX",
 		.priority_high = 1,
-		.dev_addr =  U300_PCM_I2S1_BASE + 0x14,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |
@@ -871,7 +853,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.number = U300_DMA_PCM_I2S1_RX,
 		.name = "PCM I2S1 RX",
 		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S1_BASE + 0x10,
 		.param.config = COH901318_CX_CFG_CH_DISABLE |
 				COH901318_CX_CFG_LCR_DISABLE |
 				COH901318_CX_CFG_TC_IRQ_ENABLE |