diff options
| author | Dan Williams <dan.j.williams@intel.com> | 2009-07-14 12:20:36 -0700 |
|---|---|---|
| committer | Dan Williams <dan.j.williams@intel.com> | 2009-08-29 19:09:27 -0700 |
| commit | b2f46fd8ef3dff2ab30f31126833f78b7480283a (patch) | |
| tree | 9f111e3e313b4d142c12d2d8156a2704a36904f8 /drivers/dma/iop-adma.c | |
| parent | 95475e57113c66aac7583925736ed2e2d58c990d (diff) | |
async_tx: add support for asynchronous GF multiplication
[ Based on an original patch by Yuri Tikhonov ]
This adds support for doing asynchronous GF multiplication by adding
two additional functions to the async_tx API:
async_gen_syndrome() does simultaneous XOR and Galois field
multiplication of sources.
async_syndrome_val() validates the given source buffers against known P
and Q values.
When a request is made to run async_pq against more than the hardware
maximum number of supported sources we need to reuse the previous
generated P and Q values as sources into the next operation. Care must
be taken to remove Q from P' and P from Q'. For example to perform a 5
source pq op with hardware that only supports 4 sources at a time the
following approach is taken:
p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08}))
p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10}))
p' = p + q + q + src4 = p + src4
q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4
Note: 4 is the minimum acceptable maxpq otherwise we punt to
synchronous-software path.
The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as
sources (in the above manner) and fill the remaining slots up to maxpq
with the new sources/coefficients.
Note1: Some devices have native support for P+Q continuation and can skip
this extra work. Devices with this capability can advertise it with
dma_set_maxpq. It is up to each driver how to handle the
DMA_PREP_CONTINUE flag.
Note2: The api supports disabling the generation of P when generating Q,
this is ignored by the synchronous path but is implemented by some dma
devices to save unnecessary writes. In this case the continuation
algorithm is simplified to only reuse Q as a source.
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma/iop-adma.c')
| -rw-r--r-- | drivers/dma/iop-adma.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 6ff79a67269..4496bc60666 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -1257,7 +1257,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev) dev_printk(KERN_INFO, &pdev->dev, "Intel(R) IOP: " "( %s%s%s%s%s%s%s%s%s%s)\n", - dma_has_cap(DMA_PQ_XOR, dma_dev->cap_mask) ? "pq_xor " : "", + dma_has_cap(DMA_PQ, dma_dev->cap_mask) ? "pq " : "", dma_has_cap(DMA_PQ_UPDATE, dma_dev->cap_mask) ? "pq_update " : "", dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask) ? "pq_val " : "", dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "", |