Merge tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "Mostly AMD's side of EDAC.  It is basically a new family enablement
  stuff: AMD F16h MCE decoding enablement from Jacob Shin.  The rest is
  trivial cleanups."

* tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  mpc85xx_edac: Fix typo
  EDAC, MCE, AMD: Remove unneeded exports
  EDAC, MCE, AMD: Add MCE decoding support for Family 16h
  EDAC, MCE, AMD: Make MC2 decoding per-family
  amd64_edac: Remove dead code

1 files changed, 0 insertions, 105 deletions

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 2d3f8825e8b..910b0116c12 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -602,111 +602,6 @@ static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr)
 	return input_addr;
 }
 
-
-/*
- * @input_addr is an InputAddr associated with the node represented by mci.
- * Translate @input_addr to a DramAddr and return the result.
- */
-static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
-{
-	struct amd64_pvt *pvt;
-	unsigned node_id, intlv_shift;
-	u64 bits, dram_addr;
-	u32 intlv_sel;
-
-	/*
-	 * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
-	 * shows how to translate a DramAddr to an InputAddr. Here we reverse
-	 * this procedure. When translating from a DramAddr to an InputAddr, the
-	 * bits used for node interleaving are discarded.  Here we recover these
-	 * bits from the IntlvSel field of the DRAM Limit register (section
-	 * 3.4.4.2) for the node that input_addr is associated with.
-	 */
-	pvt = mci->pvt_info;
-	node_id = pvt->mc_node_id;
-
-	BUG_ON(node_id > 7);
-
-	intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
-	if (intlv_shift == 0) {
-		edac_dbg(1, "    InputAddr 0x%lx translates to DramAddr of same value\n",
-			 (unsigned long)input_addr);
-
-		return input_addr;
-	}
-
-	bits = ((input_addr & GENMASK(12, 35)) << intlv_shift) +
-		(input_addr & 0xfff);
-
-	intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1);
-	dram_addr = bits + (intlv_sel << 12);
-
-	edac_dbg(1, "InputAddr 0x%lx translates to DramAddr 0x%lx (%d node interleave bits)\n",
-		 (unsigned long)input_addr,
-		 (unsigned long)dram_addr, intlv_shift);
-
-	return dram_addr;
-}
-
-/*
- * @dram_addr is a DramAddr that maps to the node represented by mci. Convert
- * @dram_addr to a SysAddr.
- */
-static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
-{
-	struct amd64_pvt *pvt = mci->pvt_info;
-	u64 hole_base, hole_offset, hole_size, base, sys_addr;
-	int ret = 0;
-
-	ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
-				      &hole_size);
-	if (!ret) {
-		if ((dram_addr >= hole_base) &&
-		    (dram_addr < (hole_base + hole_size))) {
-			sys_addr = dram_addr + hole_offset;
-
-			edac_dbg(1, "using DHAR to translate DramAddr 0x%lx to SysAddr 0x%lx\n",
-				 (unsigned long)dram_addr,
-				 (unsigned long)sys_addr);
-
-			return sys_addr;
-		}
-	}
-
-	base     = get_dram_base(pvt, pvt->mc_node_id);
-	sys_addr = dram_addr + base;
-
-	/*
-	 * The sys_addr we have computed up to this point is a 40-bit value
-	 * because the k8 deals with 40-bit values.  However, the value we are
-	 * supposed to return is a full 64-bit physical address.  The AMD
-	 * x86-64 architecture specifies that the most significant implemented
-	 * address bit through bit 63 of a physical address must be either all
-	 * 0s or all 1s.  Therefore we sign-extend the 40-bit sys_addr to a
-	 * 64-bit value below.  See section 3.4.2 of AMD publication 24592:
-	 * AMD x86-64 Architecture Programmer's Manual Volume 1 Application
-	 * Programming.
-	 */
-	sys_addr |= ~((sys_addr & (1ull << 39)) - 1);
-
-	edac_dbg(1, "    Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n",
-		 pvt->mc_node_id, (unsigned long)dram_addr,
-		 (unsigned long)sys_addr);
-
-	return sys_addr;
-}
-
-/*
- * @input_addr is an InputAddr associated with the node given by mci. Translate
- * @input_addr to a SysAddr.
- */
-static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci,
-					 u64 input_addr)
-{
-	return dram_addr_to_sys_addr(mci,
-				     input_addr_to_dram_addr(mci, input_addr));
-}
-
 /* Map the Error address to a PAGE and PAGE OFFSET. */
 static inline void error_address_to_page_and_offset(u64 error_address,
 						    struct err_info *err)