extcon: arizona: Simplify HPDET based identification

Rather than measuring both HP channels we can simply directly measure the
microphone impedance and then rely on MICDET for final confirmation of the
presence of a suitable microphone. This improves the overall performance
of the identification process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 25 insertions, 21 deletions

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 7c4ce812d73..a83ca27aa99 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -459,7 +459,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 	return val;
 }
 
-static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
+static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
+			       bool *mic)
 {
 	struct arizona *arizona = info->arizona;
 	int id_gpio = arizona->pdata.hpdet_id_gpio;
@@ -470,11 +471,9 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
 	 */
 	if (arizona->pdata.hpdet_acc_id) {
 		info->hpdet_res[info->num_hpdet_res++] = *reading;
-		info->hpdet_res[info->num_hpdet_res++] = *reading;
 
 		/* Only check the mic directly if we didn't already ID it */
-		if (id_gpio && info->num_hpdet_res == 2 &&
-		    !((info->hpdet_res[0] > info->hpdet_res[1] * 2))) {
+		if (id_gpio && info->num_hpdet_res == 1) {
 			dev_dbg(arizona->dev, "Measuring mic\n");
 
 			regmap_update_bits(arizona->regmap,
@@ -493,10 +492,8 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
 		}
 
 		/* OK, got both.  Now, compare... */
-		dev_dbg(arizona->dev, "HPDET measured %d %d %d\n",
-			info->hpdet_res[0], info->hpdet_res[1],
-			info->hpdet_res[2]);
-
+		dev_dbg(arizona->dev, "HPDET measured %d %d\n",
+			info->hpdet_res[0], info->hpdet_res[1]);
 
 		/* Take the headphone impedance for the main report */
 		*reading = info->hpdet_res[0];
@@ -512,13 +509,11 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
 		}
 
 		/*
-		 * Either the two grounds measure differently or we
-		 * measure the mic as high impedance.
+		 * If we measure the mic as 
 		 */
-		if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) ||
-		    (id_gpio && info->hpdet_res[2] > 1257)) {
+		if (!id_gpio || info->hpdet_res[1] > 50) {
 			dev_dbg(arizona->dev, "Detected mic\n");
-			info->mic = true;
+			*mic = true;
 			info->detecting = true;
 		} else {
 			dev_dbg(arizona->dev, "Detected headphone\n");
@@ -541,6 +536,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	int id_gpio = arizona->pdata.hpdet_id_gpio;
 	int report = ARIZONA_CABLE_HEADPHONE;
 	int ret, reading;
+	bool mic = false;
 
 	mutex_lock(&info->lock);
 
@@ -576,7 +572,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
 			   0);
 
-	ret = arizona_hpdet_do_id(info, &reading);
+	ret = arizona_hpdet_do_id(info, &reading, &mic);
 	if (ret == -EAGAIN) {
 		goto out;
 	} else if (ret < 0) {
@@ -606,7 +602,7 @@ done:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* If we have a mic then reenable MICDET */
-	if (info->mic)
+	if (mic || info->mic)
 		arizona_start_mic(info);
 
 	if (info->hpdet_active) {
@@ -681,6 +677,8 @@ err:
 static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 {
 	struct arizona *arizona = info->arizona;
+	int hp_reading = 32;
+	bool mic;
 	int ret;
 
 	dev_dbg(arizona->dev, "Starting identification via HPDET\n");
@@ -702,12 +700,18 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 		goto err;
 	}
 
-	ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
-				 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
-	if (ret != 0) {
-		dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
-			ret);
-		goto err;
+	if (arizona->pdata.hpdet_acc_id_line) {
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_HEADPHONE_DETECT_1,
+					 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Can't start HPDETL measurement: %d\n",
+				ret);
+			goto err;
+		}
+	} else {
+		arizona_hpdet_do_id(info, &hp_reading, &mic);
 	}
 
 	return;