diff options
| author | Clemens Ladisch <clemens@ladisch.de> | 2010-04-04 15:19:54 +0200 |
|---|---|---|
| committer | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2010-04-10 16:51:14 +0200 |
| commit | 925e7a6504966b838c519f009086982c68e0666f (patch) | |
| tree | 38ead3a8ae51b973156f6238f7c6b3800d3d7d46 /drivers/firewire/core.h | |
| parent | e7014dada041982ae12ba7fd1967ca0ab0243e04 (diff) | |
firewire: ohci: enable 1394a enhancements
The OHCI spec says that, if the programPhyEnable bit is set, the driver
is responsible for configuring the IEEE1394a enhancements within the PHY
and the link consistently. So do this.
Also add a quirk to allow disabling these enhancements; this is needed
for the TSB12LV22 where ack accelerations are buggy (erratum b).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/firewire/core.h')
| -rw-r--r-- | drivers/firewire/core.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h index b2a7b651473..7a9759bf683 100644 --- a/drivers/firewire/core.h +++ b/drivers/firewire/core.h @@ -27,8 +27,12 @@ struct fw_packet; #define PHY_LINK_ACTIVE 0x80 #define PHY_CONTENDER 0x40 #define PHY_BUS_RESET 0x40 +#define PHY_EXTENDED_REGISTERS 0xe0 #define PHY_BUS_SHORT_RESET 0x40 #define PHY_INT_STATUS_BITS 0x3c +#define PHY_ENABLE_ACCEL 0x02 +#define PHY_ENABLE_MULTI 0x01 +#define PHY_PAGE_SELECT 0xe0 #define BANDWIDTH_AVAILABLE_INITIAL 4915 #define BROADCAST_CHANNEL_INITIAL (1 << 31 | 31) |