summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Kconfig
diff options
context:
space:
mode:
authorJohn Crispin <blogic@openwrt.org>2012-05-11 18:48:39 +0200
committerRalf Baechle <ralf@linux-mips.org>2012-05-21 14:31:52 +0100
commit5238f7bc356670ba702057c7de7f07909133f788 (patch)
tree44b2b896a3101e63a1d7497a60efc339e50b1dfa /drivers/gpio/Kconfig
parent57c8cb8f242988b8048a7058cd1edde025c6f232 (diff)
GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them buildable. The following 2 patches will convert the drivers to OF. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/gpio/Kconfig')
-rw-r--r--drivers/gpio/Kconfig18
1 files changed, 18 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e03653d6935..8fae07935cd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -96,6 +96,14 @@ config GPIO_EP93XX
depends on ARCH_EP93XX
select GPIO_GENERIC
+config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+ help
+ This enables support for memory mapped GPIOs on the External Bus Unit
+ (EBU) found on Lantiq SoCs. The gpios are output only as they are
+ created by attaching a 16bit latch to the bus.
+
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
@@ -306,6 +314,16 @@ config GPIO_STMPE
This enables support for the GPIOs found on the STMPE I/O
Expanders.
+config GPIO_STP_XWAY
+ bool "XWAY STP GPIOs"
+ depends on SOC_XWAY
+ help
+ This enables support for the Serial To Parallel (STP) unit found on
+ XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+ that can be up to 24 bit. This peripheral is aimed at driving leds.
+ Some of the gpios/leds can be auto updated by the soc with dsl and
+ phy status.
+
config GPIO_TC3589X
bool "TC3589X GPIOs"
depends on MFD_TC3589X