diff options
author | Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 2011-06-27 09:26:23 +0200 |
---|---|---|
committer | Grant Likely <grant.likely@secretlab.ca> | 2012-02-03 16:13:25 -0700 |
commit | b43ab901d671e3e3cad425ea5e9a3c74e266dcdd (patch) | |
tree | 9527497057e939c478ff8ac5760f71cafff3b996 /drivers/gpio/gpio-sodaville.c | |
parent | 608589b15f02e59e8c40df7ef861064f1b6fa504 (diff) |
gpio: Add a driver for Sodaville GPIO controller
Sodaville has GPIO controller behind the PCI bus. To my suprissed it is
not the same as on PXA.
The interrupt & gpio chip can be referenced from the device tree like
from any other driver. Unfortunately the driver which uses the gpio
interrupt has to use irq_of_parse_and_map() instead of
platform_get_irq(). The problem is that the platform device (which is
created from the device tree) is most likely created before the
interrupt chip is registered and therefore irq_of_parse_and_map() fails.
In theory the driver works as module. In reality most of the irq
functions are not exported to modules and it is possible that _this_
module is unloaded while the provided irqs are still in use.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
[torbenh@linutronix.de: make it work after the irq namespace cleanup,
add some device tree entries.]
Signed-off-by: Torben Hohn <torbenh@linutronix.de>
[bigeasy@linutronix.de: convert to generic irq & gpio chip]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[grant.likely@secretlab.ca: depend on x86 to avoid irq_domain breakage]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/gpio/gpio-sodaville.c')
-rw-r--r-- | drivers/gpio/gpio-sodaville.c | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c new file mode 100644 index 00000000000..9ba15d31d24 --- /dev/null +++ b/drivers/gpio/gpio-sodaville.c @@ -0,0 +1,302 @@ +/* + * GPIO interface for Intel Sodaville SoCs. + * + * Copyright (c) 2010, 2011 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/of_irq.h> +#include <linux/basic_mmio_gpio.h> + +#define DRV_NAME "sdv_gpio" +#define SDV_NUM_PUB_GPIOS 12 +#define PCI_DEVICE_ID_SDV_GPIO 0x2e67 +#define GPIO_BAR 0 + +#define GPOUTR 0x00 +#define GPOER 0x04 +#define GPINR 0x08 + +#define GPSTR 0x0c +#define GPIT1R0 0x10 +#define GPIO_INT 0x14 +#define GPIT1R1 0x18 + +#define GPMUXCTL 0x1c + +struct sdv_gpio_chip_data { + int irq_base; + void __iomem *gpio_pub_base; + struct irq_domain id; + struct irq_chip_generic *gc; + struct bgpio_chip bgpio; +}; + +static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct sdv_gpio_chip_data *sd = gc->private; + void __iomem *type_reg; + u32 irq_offs = d->irq - sd->irq_base; + u32 reg; + + if (irq_offs < 8) + type_reg = sd->gpio_pub_base + GPIT1R0; + else + type_reg = sd->gpio_pub_base + GPIT1R1; + + reg = readl(type_reg); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + reg &= ~BIT(4 * (irq_offs % 8)); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= BIT(4 * (irq_offs % 8)); + break; + + default: + return -EINVAL; + } + + writel(reg, type_reg); + return 0; +} + +static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data) +{ + struct sdv_gpio_chip_data *sd = data; + u32 irq_stat = readl(sd->gpio_pub_base + GPSTR); + + irq_stat &= readl(sd->gpio_pub_base + GPIO_INT); + if (!irq_stat) + return IRQ_NONE; + + while (irq_stat) { + u32 irq_bit = __fls(irq_stat); + + irq_stat &= ~BIT(irq_bit); + generic_handle_irq(sd->irq_base + irq_bit); + } + + return IRQ_HANDLED; +} + +static int sdv_xlate(struct irq_domain *h, struct device_node *node, + const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq, + u32 *out_type) +{ + u32 line, type; + + if (node != h->of_node) + return -EINVAL; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + *out_hwirq = line; + + intspec++; + type = *intspec; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + *out_type = type; + break; + default: + return -EINVAL; + } + return 0; +} + +static struct irq_domain_ops irq_domain_sdv_ops = { + .dt_translate = sdv_xlate, +}; + +static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, + struct pci_dev *pdev) +{ + struct irq_chip_type *ct; + int ret; + + sd->irq_base = irq_alloc_descs(-1, 0, SDV_NUM_PUB_GPIOS, -1); + if (sd->irq_base < 0) + return sd->irq_base; + + /* mask + ACK all interrupt sources */ + writel(0, sd->gpio_pub_base + GPIO_INT); + writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR); + + ret = request_irq(pdev->irq, sdv_gpio_pub_irq_handler, IRQF_SHARED, + "sdv_gpio", sd); + if (ret) + goto out_free_desc; + + sd->id.irq_base = sd->irq_base; + sd->id.of_node = of_node_get(pdev->dev.of_node); + sd->id.ops = &irq_domain_sdv_ops; + + /* + * This gpio irq controller latches level irqs. Testing shows that if + * we unmask & ACK the IRQ before the source of the interrupt is gone + * then the interrupt is active again. + */ + sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base, + sd->gpio_pub_base, handle_fasteoi_irq); + if (!sd->gc) { + ret = -ENOMEM; + goto out_free_irq; + } + + sd->gc->private = sd; + ct = sd->gc->chip_types; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->regs.eoi = GPSTR; + ct->regs.mask = GPIO_INT; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_eoi = irq_gc_eoi; + ct->chip.irq_set_type = sdv_gpio_pub_set_type; + + irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS), + IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, + IRQ_LEVEL | IRQ_NOPROBE); + + irq_domain_add(&sd->id); + return 0; +out_free_irq: + free_irq(pdev->irq, sd); +out_free_desc: + irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); + return ret; +} + +static int __devinit sdv_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct sdv_gpio_chip_data *sd; + unsigned long addr; + const void *prop; + int len; + int ret; + u32 mux_val; + + sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL); + if (!sd) + return -ENOMEM; + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device.\n"); + goto done; + } + + ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); + goto disable_pci; + } + + addr = pci_resource_start(pdev, GPIO_BAR); + if (!addr) + goto release_reg; + sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR)); + + prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len); + if (prop && len == 4) { + mux_val = of_read_number(prop, 1); + writel(mux_val, sd->gpio_pub_base + GPMUXCTL); + } + + ret = bgpio_init(&sd->bgpio, &pdev->dev, 4, + sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR, + NULL, sd->gpio_pub_base + GPOER, NULL, false); + if (ret) + goto unmap; + sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS; + + ret = gpiochip_add(&sd->bgpio.gc); + if (ret < 0) { + dev_err(&pdev->dev, "gpiochip_add() failed.\n"); + goto unmap; + } + + ret = sdv_register_irqsupport(sd, pdev); + if (ret) + goto unmap; + + pci_set_drvdata(pdev, sd); + dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n"); + return 0; + +unmap: + iounmap(sd->gpio_pub_base); +release_reg: + pci_release_region(pdev, GPIO_BAR); +disable_pci: + pci_disable_device(pdev); +done: + kfree(sd); + return ret; +} + +static void sdv_gpio_remove(struct pci_dev *pdev) +{ + struct sdv_gpio_chip_data *sd = pci_get_drvdata(pdev); + + irq_domain_del(&sd->id); + free_irq(pdev->irq, sd); + irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); + + if (gpiochip_remove(&sd->bgpio.gc)) + dev_err(&pdev->dev, "gpiochip_remove() failed.\n"); + + pci_release_region(pdev, GPIO_BAR); + iounmap(sd->gpio_pub_base); + pci_disable_device(pdev); + kfree(sd); +} + +static struct pci_device_id sdv_gpio_pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) }, + { 0, }, +}; + +static struct pci_driver sdv_gpio_driver = { + .name = DRV_NAME, + .id_table = sdv_gpio_pci_ids, + .probe = sdv_gpio_probe, + .remove = sdv_gpio_remove, +}; + +static int __init sdv_gpio_init(void) +{ + return pci_register_driver(&sdv_gpio_driver); +} +module_init(sdv_gpio_init); + +static void __exit sdv_gpio_exit(void) +{ + pci_unregister_driver(&sdv_gpio_driver); +} +module_exit(sdv_gpio_exit); + +MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>"); +MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs"); +MODULE_LICENSE("GPL v2"); |