Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...

4 files changed, 18 insertions, 55 deletions

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0725d181581..94cbc842fbc 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,11 +25,9 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 #define OFF_MODE	1
@@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 static int gpio_irq_type(struct irq_data *d, unsigned type)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned gpio;
+	unsigned gpio = 0;
 	int retval;
 	unsigned long flags;
 
-	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+	if (d->irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	else
+#endif
+
+	if (!gpio)
 		gpio = irq_to_gpio(bank, d->irq);
 
 	if (type & ~IRQ_TYPE_SENSE_MASK)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ba126cc0407..1c169324e35 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -3131,46 +3131,6 @@ samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
 }
 EXPORT_SYMBOL(s3c_gpio_getpull);
 
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1 << offs);
-}
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
 #ifdef CONFIG_S5P_GPIO_DRVSTR
 s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 {
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index dc5184d5789..d982593d756 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -30,9 +30,6 @@
 
 #include <asm/mach/irq.h>
 
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
 #define GPIO_BANK(x)		((x) >> 5)
 #define GPIO_PORT(x)		(((x) >> 3) & 0x3)
 #define GPIO_BIT(x)		((x) & 0x7)
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe7bf3..f030880bc9b 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
 
 
 static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
 static int twl4030_gpio_irq_base;
 
 /* genirq interfaces are not available to modules */
@@ -428,8 +429,6 @@ no_irqs:
 	twl_gpiochip.dev = &pdev->dev;
 
 	if (pdata) {
-		twl_gpiochip.base = pdata->gpio_base;
-
 		/*
 		 * NOTE:  boards may waste power if they don't set pullups
 		 * and pulldowns correctly ... default for non-ULPI pins is
@@ -461,15 +460,21 @@ no_irqs:
 		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata && pdata->setup) {
+		goto out;
+	}
+
+	twl4030_gpio_base = twl_gpiochip.base;
+
+	if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status)
 			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+out:
 	return ret;
 }
 
@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 
 	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
 			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
 			return status;