Merge branch 'dmaengine' into async-tx-next

Conflicts:
	crypto/async_tx/async_xor.c
	drivers/dma/ioat/dma_v2.h
	drivers/dma/ioat/pci.c
	drivers/md/raid5.c

5 files changed, 425 insertions, 7 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index edb02530e46..3582c39f972 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -67,9 +67,15 @@ config GPIO_SYSFS
 
 comment "Memory mapped GPIO expanders:"
 
+config GPIO_PL061
+	bool "PrimeCell PL061 GPIO support"
+	depends on ARM_AMBA
+	help
+	  Say yes here to support the PrimeCell PL061 GPIO device
+
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
-	depends on PPC_OF
+	depends on PPC_OF || MICROBLAZE
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 49ac64e515e..ef90203e8f3 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+obj-$(CONFIG_GPIO_PL061)	+= pl061.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 3e7f4e06386..7b82eaae262 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -287,7 +287,7 @@ exit_destroy:
 	return ret;
 }
 
-static int max7301_remove(struct spi_device *spi)
+static int __devexit max7301_remove(struct spi_device *spi)
 {
 	struct max7301 *ts;
 	int ret;
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 8dc0164bd51..cdb6574d25a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -15,6 +15,10 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#ifdef CONFIG_OF_GPIO
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#endif
 
 #include <asm/gpio.h>
 
@@ -32,6 +36,7 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "pca9539", 16, },
 	{ "pca9554", 8, },
 	{ "pca9555", 16, },
+	{ "pca9556", 8, },
 	{ "pca9557", 8, },
 
 	{ "max7310", 8, },
@@ -49,7 +54,9 @@ struct pca953x_chip {
 	uint16_t reg_direction;
 
 	struct i2c_client *client;
+	struct pca953x_platform_data *dyn_pdata;
 	struct gpio_chip gpio_chip;
+	char **names;
 };
 
 static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
@@ -192,8 +199,57 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->label = chip->client->name;
 	gc->dev = &chip->client->dev;
 	gc->owner = THIS_MODULE;
+	gc->names = chip->names;
 }
 
+/*
+ * Handlers for alternative sources of platform_data
+ */
+#ifdef CONFIG_OF_GPIO
+/*
+ * Translate OpenFirmware node properties into platform_data
+ */
+static struct pca953x_platform_data *
+pca953x_get_alt_pdata(struct i2c_client *client)
+{
+	struct pca953x_platform_data *pdata;
+	struct device_node *node;
+	const uint16_t *val;
+
+	node = dev_archdata_get_node(&client->dev.archdata);
+	if (node == NULL)
+		return NULL;
+
+	pdata = kzalloc(sizeof(struct pca953x_platform_data), GFP_KERNEL);
+	if (pdata == NULL) {
+		dev_err(&client->dev, "Unable to allocate platform_data\n");
+		return NULL;
+	}
+
+	pdata->gpio_base = -1;
+	val = of_get_property(node, "linux,gpio-base", NULL);
+	if (val) {
+		if (*val < 0)
+			dev_warn(&client->dev,
+				 "invalid gpio-base in device tree\n");
+		else
+			pdata->gpio_base = *val;
+	}
+
+	val = of_get_property(node, "polarity", NULL);
+	if (val)
+		pdata->invert = *val;
+
+	return pdata;
+}
+#else
+static struct pca953x_platform_data *
+pca953x_get_alt_pdata(struct i2c_client *client)
+{
+	return NULL;
+}
+#endif
+
 static int __devinit pca953x_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
@@ -201,20 +257,32 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	struct pca953x_chip *chip;
 	int ret;
 
+	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
 	pdata = client->dev.platform_data;
 	if (pdata == NULL) {
-		dev_dbg(&client->dev, "no platform data\n");
-		return -EINVAL;
+		pdata = pca953x_get_alt_pdata(client);
+		/*
+		 * Unlike normal platform_data, this is allocated
+		 * dynamically and must be freed in the driver
+		 */
+		chip->dyn_pdata = pdata;
 	}
 
-	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
+	if (pdata == NULL) {
+		dev_dbg(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto out_failed;
+	}
 
 	chip->client = client;
 
 	chip->gpio_start = pdata->gpio_base;
 
+	chip->names = pdata->names;
+
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
@@ -249,6 +317,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	return 0;
 
 out_failed:
+	kfree(chip->dyn_pdata);
 	kfree(chip);
 	return ret;
 }
@@ -276,6 +345,7 @@ static int pca953x_remove(struct i2c_client *client)
 		return ret;
 	}
 
+	kfree(chip->dyn_pdata);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
new file mode 100644
index 00000000000..aa8e7cb020d
--- /dev/null
+++ b/drivers/gpio/pl061.c
@@ -0,0 +1,341 @@
+/*
+ *  linux/drivers/gpio/pl061.c
+ *
+ *  Copyright (C) 2008, 2009 Provigent Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)
+ *
+ * Data sheet: ARM DDI 0190B, September 2000
+ */
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
+
+#define GPIODIR 0x400
+#define GPIOIS  0x404
+#define GPIOIBE 0x408
+#define GPIOIEV 0x40C
+#define GPIOIE  0x410
+#define GPIORIS 0x414
+#define GPIOMIS 0x418
+#define GPIOIC  0x41C
+
+#define PL061_GPIO_NR	8
+
+struct pl061_gpio {
+	/* We use a list of pl061_gpio structs for each trigger IRQ in the main
+	 * interrupts controller of the system. We need this to support systems
+	 * in which more that one PL061s are connected to the same IRQ. The ISR
+	 * interates through this list to find the source of the interrupt.
+	 */
+	struct list_head	list;
+
+	/* Each of the two spinlocks protects a different set of hardware
+	 * regiters and data structurs. This decouples the code of the IRQ from
+	 * the GPIO code. This also makes the case of a GPIO routine call from
+	 * the IRQ code simpler.
+	 */
+	spinlock_t		lock;		/* GPIO registers */
+	spinlock_t		irq_lock;	/* IRQ registers */
+
+	void __iomem		*base;
+	unsigned		irq_base;
+	struct gpio_chip	gc;
+};
+
+static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+	unsigned long flags;
+	unsigned char gpiodir;
+
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	gpiodir = readb(chip->base + GPIODIR);
+	gpiodir &= ~(1 << offset);
+	writeb(gpiodir, chip->base + GPIODIR);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
+		int value)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+	unsigned long flags;
+	unsigned char gpiodir;
+
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
+	gpiodir = readb(chip->base + GPIODIR);
+	gpiodir |= 1 << offset;
+	writeb(gpiodir, chip->base + GPIODIR);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+	return !!readb(chip->base + (1 << (offset + 2)));
+}
+
+static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
+}
+
+/*
+ * PL061 GPIO IRQ
+ */
+static void pl061_irq_disable(unsigned irq)
+{
+	struct pl061_gpio *chip = get_irq_chip_data(irq);
+	int offset = irq - chip->irq_base;
+	unsigned long flags;
+	u8 gpioie;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	gpioie = readb(chip->base + GPIOIE);
+	gpioie &= ~(1 << offset);
+	writeb(gpioie, chip->base + GPIOIE);
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+
+static void pl061_irq_enable(unsigned irq)
+{
+	struct pl061_gpio *chip = get_irq_chip_data(irq);
+	int offset = irq - chip->irq_base;
+	unsigned long flags;
+	u8 gpioie;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	gpioie = readb(chip->base + GPIOIE);
+	gpioie |= 1 << offset;
+	writeb(gpioie, chip->base + GPIOIE);
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+
+static int pl061_irq_type(unsigned irq, unsigned trigger)
+{
+	struct pl061_gpio *chip = get_irq_chip_data(irq);
+	int offset = irq - chip->irq_base;
+	unsigned long flags;
+	u8 gpiois, gpioibe, gpioiev;
+
+	if (offset < 0 || offset > PL061_GPIO_NR)
+		return -EINVAL;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+
+	gpioiev = readb(chip->base + GPIOIEV);
+
+	gpiois = readb(chip->base + GPIOIS);
+	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		gpiois |= 1 << offset;
+		if (trigger & IRQ_TYPE_LEVEL_HIGH)
+			gpioiev |= 1 << offset;
+		else
+			gpioiev &= ~(1 << offset);
+	} else
+		gpiois &= ~(1 << offset);
+	writeb(gpiois, chip->base + GPIOIS);
+
+	gpioibe = readb(chip->base + GPIOIBE);
+	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+		gpioibe |= 1 << offset;
+	else {
+		gpioibe &= ~(1 << offset);
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			gpioiev |= 1 << offset;
+		else
+			gpioiev &= ~(1 << offset);
+	}
+	writeb(gpioibe, chip->base + GPIOIBE);
+
+	writeb(gpioiev, chip->base + GPIOIEV);
+
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip pl061_irqchip = {
+	.name		= "GPIO",
+	.enable		= pl061_irq_enable,
+	.disable	= pl061_irq_disable,
+	.set_type	= pl061_irq_type,
+};
+
+static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct list_head *chip_list = get_irq_chip_data(irq);
+	struct list_head *ptr;
+	struct pl061_gpio *chip;
+
+	desc->chip->ack(irq);
+	list_for_each(ptr, chip_list) {
+		unsigned long pending;
+		int gpio;
+
+		chip = list_entry(ptr, struct pl061_gpio, list);
+		pending = readb(chip->base + GPIOMIS);
+		writeb(pending, chip->base + GPIOIC);
+
+		if (pending == 0)
+			continue;
+
+		for_each_bit(gpio, &pending, PL061_GPIO_NR)
+			generic_handle_irq(gpio_to_irq(gpio));
+	}
+	desc->chip->unmask(irq);
+}
+
+static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct pl061_platform_data *pdata;
+	struct pl061_gpio *chip;
+	struct list_head *chip_list;
+	int ret, irq, i;
+	static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)];
+
+	pdata = dev->dev.platform_data;
+	if (pdata == NULL)
+		return -ENODEV;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	if (!request_mem_region(dev->res.start,
+				resource_size(&dev->res), "pl061")) {
+		ret = -EBUSY;
+		goto free_mem;
+	}
+
+	chip->base = ioremap(dev->res.start, resource_size(&dev->res));
+	if (chip->base == NULL) {
+		ret = -ENOMEM;
+		goto release_region;
+	}
+
+	spin_lock_init(&chip->lock);
+	spin_lock_init(&chip->irq_lock);
+	INIT_LIST_HEAD(&chip->list);
+
+	chip->gc.direction_input = pl061_direction_input;
+	chip->gc.direction_output = pl061_direction_output;
+	chip->gc.get = pl061_get_value;
+	chip->gc.set = pl061_set_value;
+	chip->gc.base = pdata->gpio_base;
+	chip->gc.ngpio = PL061_GPIO_NR;
+	chip->gc.label = dev_name(&dev->dev);
+	chip->gc.dev = &dev->dev;
+	chip->gc.owner = THIS_MODULE;
+
+	chip->irq_base = pdata->irq_base;
+
+	ret = gpiochip_add(&chip->gc);
+	if (ret)
+		goto iounmap;
+
+	/*
+	 * irq_chip support
+	 */
+
+	if (chip->irq_base == (unsigned) -1)
+		return 0;
+
+	writeb(0, chip->base + GPIOIE); /* disable irqs */
+	irq = dev->irq[0];
+	if (irq < 0) {
+		ret = -ENODEV;
+		goto iounmap;
+	}
+	set_irq_chained_handler(irq, pl061_irq_handler);
+	if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
+		chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
+		if (chip_list == NULL) {
+			ret = -ENOMEM;
+			goto iounmap;
+		}
+		INIT_LIST_HEAD(chip_list);
+		set_irq_chip_data(irq, chip_list);
+	} else
+		chip_list = get_irq_chip_data(irq);
+	list_add(&chip->list, chip_list);
+
+	for (i = 0; i < PL061_GPIO_NR; i++) {
+		if (pdata->directions & (1 << i))
+			pl061_direction_output(&chip->gc, i,
+					pdata->values & (1 << i));
+		else
+			pl061_direction_input(&chip->gc, i);
+
+		set_irq_chip(i+chip->irq_base, &pl061_irqchip);
+		set_irq_handler(i+chip->irq_base, handle_simple_irq);
+		set_irq_flags(i+chip->irq_base, IRQF_VALID);
+		set_irq_chip_data(i+chip->irq_base, chip);
+	}
+
+	return 0;
+
+iounmap:
+	iounmap(chip->base);
+release_region:
+	release_mem_region(dev->res.start, resource_size(&dev->res));
+free_mem:
+	kfree(chip);
+
+	return ret;
+}
+
+static struct amba_id pl061_ids[] __initdata = {
+	{
+		.id	= 0x00041061,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl061_gpio_driver = {
+	.drv = {
+		.name	= "pl061_gpio",
+	},
+	.id_table	= pl061_ids,
+	.probe		= pl061_probe,
+};
+
+static int __init pl061_gpio_init(void)
+{
+	return amba_driver_register(&pl061_gpio_driver);
+}
+subsys_initcall(pl061_gpio_init);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("PL061 GPIO driver");
+MODULE_LICENSE("GPL");