include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

18 files changed, 17 insertions, 1 deletions

diff --git a/drivers/gpio/adp5520-gpio.c b/drivers/gpio/adp5520-gpio.c
index 0f93105873c..9f278153700 100644
--- a/drivers/gpio/adp5520-gpio.c
+++ b/drivers/gpio/adp5520-gpio.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
diff --git a/drivers/gpio/adp5588-gpio.c b/drivers/gpio/adp5588-gpio.c
index afc097a16b3..2e8e9e24f88 100644
--- a/drivers/gpio/adp5588-gpio.c
+++ b/drivers/gpio/adp5588-gpio.c
@@ -9,6 +9,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
diff --git a/drivers/gpio/bt8xxgpio.c b/drivers/gpio/bt8xxgpio.c
index 2559f228940..aa4f09ad3ce 100644
--- a/drivers/gpio/bt8xxgpio.c
+++ b/drivers/gpio/bt8xxgpio.c
@@ -47,6 +47,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 /* Steal the hardware definitions from the bttv driver. */
 #include "../media/video/bt8xx/bt848.h"
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 6d1b86661e6..76be229c814 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -9,6 +9,7 @@
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
 #include <linux/idr.h>
+#include <linux/slab.h>
 
 
 /* Optional implementation infrastructure for GPIO interfaces.
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
index 6c0ebbdc659..00c3a14127a 100644
--- a/drivers/gpio/langwell_gpio.c
+++ b/drivers/gpio/langwell_gpio.c
@@ -29,6 +29,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 struct lnw_gpio_register {
 	u32	GPLR[2];
diff --git a/drivers/gpio/max7300.c b/drivers/gpio/max7300.c
index 9d74eef1157..962f661c18c 100644
--- a/drivers/gpio/max7300.c
+++ b/drivers/gpio/max7300.c
@@ -16,6 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/i2c.h>
 #include <linux/spi/max7301.h>
+#include <linux/slab.h>
 
 static int max7300_i2c_write(struct device *dev, unsigned int reg,
 				unsigned int val)
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 965d9b1ea13..92a100ddef6 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/max7301.h>
 
diff --git a/drivers/gpio/max730x.c b/drivers/gpio/max730x.c
index 4a7d662ff9b..7696a5625d5 100644
--- a/drivers/gpio/max730x.c
+++ b/drivers/gpio/max730x.c
@@ -38,6 +38,7 @@
 #include <linux/mutex.h>
 #include <linux/spi/max7301.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 /*
  * Pin configurations, see MAX7301 datasheet page 6
diff --git a/drivers/gpio/mc33880.c b/drivers/gpio/mc33880.c
index e7d01bd8fdb..935479da670 100644
--- a/drivers/gpio/mc33880.c
+++ b/drivers/gpio/mc33880.c
@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/mc33880.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 #define DRIVER_NAME "mc33880"
 
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index cd651ec8d03..69f6f1955a3 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -9,6 +9,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/mcp23s08.h>
+#include <linux/slab.h>
 
 
 /* Registers are all 8 bits wide.
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index ab5daab14bc..7d521e1d17e 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/slab.h>
 #ifdef CONFIG_OF_GPIO
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 3ad1eeb4960..5ad8f778ced 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -24,6 +24,7 @@
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/slab.h>
 
 #define GPIODIR 0x400
 #define GPIOIS  0x404
diff --git a/drivers/gpio/timbgpio.c b/drivers/gpio/timbgpio.c
index d4295fa5369..ac4d0f0ea02 100644
--- a/drivers/gpio/timbgpio.c
+++ b/drivers/gpio/timbgpio.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/timb_gpio.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 
 #define DRIVER_NAME "timb-gpio"
 
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index 7fe881e2bdf..57635ac35a7 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -32,7 +32,6 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-#include <linux/slab.h>
 
 #include <linux/i2c/twl.h>
 
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
index d09021f4a7d..1fa449a1a4c 100644
--- a/drivers/gpio/wm831x-gpio.c
+++ b/drivers/gpio/wm831x-gpio.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/mfd/core.h>
diff --git a/drivers/gpio/wm8350-gpiolib.c b/drivers/gpio/wm8350-gpiolib.c
index 511840d1c7b..359999290f5 100644
--- a/drivers/gpio/wm8350-gpiolib.c
+++ b/drivers/gpio/wm8350-gpiolib.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/mfd/core.h>
diff --git a/drivers/gpio/wm8994-gpio.c b/drivers/gpio/wm8994-gpio.c
index de28b4a470e..7607cc61e1d 100644
--- a/drivers/gpio/wm8994-gpio.c
+++ b/drivers/gpio/wm8994-gpio.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/mfd/core.h>
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
index 3c1177abebd..b8fa65b5bfc 100644
--- a/drivers/gpio/xilinx_gpio.c
+++ b/drivers/gpio/xilinx_gpio.c
@@ -19,6 +19,7 @@
 #include <linux/of_gpio.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 /* Register Offset Definitions */
 #define XGPIO_DATA_OFFSET   (0x0)	/* Data register  */