diff options
author | John Crispin <blogic@openwrt.org> | 2012-05-16 22:17:38 +0200 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2012-05-21 14:31:53 +0100 |
commit | a36e9a1c5fa67cdc965fe011f1d04317adb35953 (patch) | |
tree | 8fc82e50f53c718c0e12785fb63f3fbeb270b383 /drivers/gpio | |
parent | 5238f7bc356670ba702057c7de7f07909133f788 (diff) |
GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
Implements OF support and convert to of_mm_gpio.
By attaching hardware latches to the External Bus Unit (EBU) on Lantiq SoC, it
is possible to create output only gpios. This driver configures a special
memory address, which when written to, outputs 16 bit to the latches.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: https://patchwork.linux-mips.org/patch/3840/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/gpio-mm-lantiq.c | 146 |
1 files changed, 89 insertions, 57 deletions
diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c index b91c7f17f10..2983dfbd066 100644 --- a/drivers/gpio/gpio-mm-lantiq.c +++ b/drivers/gpio/gpio-mm-lantiq.c @@ -3,16 +3,19 @@ * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> */ #include <linux/init.h> -#include <linux/export.h> +#include <linux/module.h> #include <linux/types.h> #include <linux/platform_device.h> #include <linux/mutex.h> #include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/io.h> +#include <linux/slab.h> #include <lantiq_soc.h> @@ -25,102 +28,131 @@ #define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ #define LTQ_EBU_WP 0x80000000 /* write protect bit */ -/* we keep a shadow value of the last value written to the ebu */ -static int ltq_ebu_gpio_shadow = 0x0; -static void __iomem *ltq_ebu_gpio_membase; +struct ltq_mm { + struct of_mm_gpio_chip mmchip; + u16 shadow; /* shadow the latches state */ +}; -static void ltq_ebu_apply(void) +/** + * ltq_mm_apply() - write the shadow value to the ebu address. + * @chip: Pointer to our private data structure. + * + * Write the shadow value to the EBU to set the gpios. We need to set the + * global EBU lock to make sure that PCI/MTD dont break. + */ +static void ltq_mm_apply(struct ltq_mm *chip) { unsigned long flags; spin_lock_irqsave(&ebu_lock, flags); ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); - *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; + __raw_writew(chip->shadow, chip->mmchip.regs); ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); spin_unlock_irqrestore(&ebu_lock, flags); } -static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) +/** + * ltq_mm_set() - gpio_chip->set - set gpios. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Set the shadow value and call ltq_mm_apply. + */ +static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value) { + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ltq_mm *chip = + container_of(mm_gc, struct ltq_mm, mmchip); + if (value) - ltq_ebu_gpio_shadow |= (1 << offset); + chip->shadow |= (1 << offset); else - ltq_ebu_gpio_shadow &= ~(1 << offset); - ltq_ebu_apply(); + chip->shadow &= ~(1 << offset); + ltq_mm_apply(chip); } -static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, - int value) +/** + * ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * Same as ltq_mm_set, always returns 0. + */ +static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value) { - ltq_ebu_set(chip, offset, value); + ltq_mm_set(gc, offset, value); return 0; } -static struct gpio_chip ltq_ebu_chip = { - .label = "ltq_ebu", - .direction_output = ltq_ebu_direction_output, - .set = ltq_ebu_set, - .base = 72, - .ngpio = 16, - .can_sleep = 1, - .owner = THIS_MODULE, -}; +/** + * ltq_mm_save_regs() - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct ltq_mm *chip = + container_of(mm_gc, struct ltq_mm, mmchip); + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1); + + ltq_mm_apply(chip); +} -static int ltq_ebu_probe(struct platform_device *pdev) +static int ltq_mm_probe(struct platform_device *pdev) { - int ret = 0; struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct ltq_mm *chip; + const __be32 *shadow; + int ret = 0; if (!res) { dev_err(&pdev->dev, "failed to get memory resource\n"); return -ENOENT; } - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - return -EBUSY; - } - - ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (!ltq_ebu_gpio_membase) { - dev_err(&pdev->dev, "Failed to ioremap mem region\n"); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) return -ENOMEM; - } - /* grab the default shadow value passed form the platform code */ - ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; + chip->mmchip.gc.ngpio = 16; + chip->mmchip.gc.label = "gpio-mm-ltq"; + chip->mmchip.gc.direction_output = ltq_mm_dir_out; + chip->mmchip.gc.set = ltq_mm_set; + chip->mmchip.save_regs = ltq_mm_save_regs; - /* tell the ebu controller which memory address we will be using */ - ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); + /* store the shadow value if one was passed by the devicetree */ + shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL); + if (shadow) + chip->shadow = be32_to_cpu(*shadow); - /* write protect the region */ - ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); - - ret = gpiochip_add(<q_ebu_chip); - if (!ret) - ltq_ebu_apply(); + ret = of_mm_gpiochip_add(pdev->dev.of_node, &chip->mmchip); + if (ret) + kfree(chip); return ret; } -static struct platform_driver ltq_ebu_driver = { - .probe = ltq_ebu_probe, +static const struct of_device_id ltq_mm_match[] = { + { .compatible = "lantiq,gpio-mm" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_mm_match); + +static struct platform_driver ltq_mm_driver = { + .probe = ltq_mm_probe, .driver = { - .name = "ltq_ebu", + .name = "gpio-mm-ltq", .owner = THIS_MODULE, + .of_match_table = ltq_mm_match, }, }; -static int __init ltq_ebu_init(void) +static int __init ltq_mm_init(void) { - int ret = platform_driver_register(<q_ebu_driver); - - if (ret) - pr_info("ltq_ebu : Error registering platfom driver!"); - return ret; + return platform_driver_register(<q_mm_driver); } -postcore_initcall(ltq_ebu_init); +subsys_initcall(ltq_mm_init); |