summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
diff options
context:
space:
mode:
authorJavier Martinez Canillas <javier.martinez@collabora.co.uk>2013-06-28 17:27:02 +0200
committerLinus Walleij <linus.walleij@linaro.org>2013-07-20 18:57:27 +0200
commit0e970cec05635adbe7b686063e2548a8e4afb8f4 (patch)
tree3964060d8cbf5da9107e319b00afa65f2b709f7f /drivers/gpio
parentad81f0545ef01ea651886dddac4bef6cec930092 (diff)
gpio/omap: don't create an IRQ mapping for every GPIO on DT
When a GPIO is defined as an interrupt line using Device Tree, a call to irq_create_of_mapping() is made that calls irq_create_mapping(). So, is not necessary to do the mapping for all OMAP GPIO lines and explicitly call irq_create_mapping() on the driver probe() when booting with Device Tree. Add a custom IRQ domain .map function handler that will be called by irq_create_mapping() to map the GPIO lines used as IRQ. This also allows to execute needed setup code such as configuring a GPIO as input and enabling the GPIO bank. Changes since v3: - Use bank->chip.of_node instead of_have_populated_dt() to check DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD Changes since v2: - Unconditionally do the IRQ setup in the .map() function and only call irq_create_mapping() in the gpio chip init to avoid code duplication as suggested by Grant Likely. Changes since v1: - Split the addition of the .map function handler and the automatic gpio request in two different patches. - Add GPIO IRQ setup logic to the irq domain mapping function. - Only call irq_create_mapping for every GPIO on legacy boot. - Only setup a GPIO IRQ on the .map function for DeviceTree boot. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/gpio-omap.c54
1 files changed, 40 insertions, 14 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index dfeb3a3a8f2..5e667ff91dc 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1068,24 +1068,50 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
gpiochip_add(&bank->chip);
- for (j = 0; j < bank->width; j++) {
- int irq = irq_create_mapping(bank->domain, j);
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_data(irq, bank);
- if (bank->is_mpuio) {
- omap_mpuio_alloc_gc(bank, irq, bank->width);
- } else {
- irq_set_chip_and_handler(irq, &gpio_irq_chip,
- handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
- }
+ /*
+ * REVISIT these explicit calls to irq_create_mapping()
+ * to do the GPIO to IRQ domain mapping for each GPIO in
+ * the bank can be removed once all OMAP platforms have
+ * been migrated to Device Tree boot only.
+ * Since in DT boot irq_create_mapping() is called from
+ * irq_create_of_mapping() only for the GPIO lines that
+ * are used as interrupts.
+ */
+ if (!bank->chip.of_node)
+ for (j = 0; j < bank->width; j++)
+ irq_create_mapping(bank->domain, j);
irq_set_chained_handler(bank->irq, gpio_irq_handler);
irq_set_handler_data(bank->irq, bank);
}
static const struct of_device_id omap_gpio_match[];
+static int omap_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct gpio_bank *bank = d->host_data;
+
+ if (!bank)
+ return -EINVAL;
+
+ irq_set_lockdep_class(virq, &gpio_lock_class);
+ irq_set_chip_data(virq, bank);
+ if (bank->is_mpuio) {
+ omap_mpuio_alloc_gc(bank, virq, bank->width);
+ } else {
+ irq_set_chip_and_handler(virq, &gpio_irq_chip,
+ handle_simple_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct irq_domain_ops omap_gpio_irq_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+ .map = omap_gpio_irq_map,
+};
+
static int omap_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1151,10 +1177,10 @@ static int omap_gpio_probe(struct platform_device *pdev)
}
bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
- 0, &irq_domain_simple_ops, NULL);
+ 0, &omap_gpio_irq_ops, bank);
#else
bank->domain = irq_domain_add_linear(node, bank->width,
- &irq_domain_simple_ops, NULL);
+ &omap_gpio_irq_ops, bank);
#endif
if (!bank->domain) {
dev_err(dev, "Couldn't register an IRQ domain\n");